Statistics

250,738 members
127,934 posts
  • New
    bobbydoy1e
    Newcomer - Level 1
    2021-07-01

    I sent a brand new amplifier that went bad the first day I used it in the middle of a show to a company called panurgy they received it on June 21st I haven't heard a word how do I get information on this amplifier

    0 58
  • New
    Myron2099
    Newcomer - Level 1
    2021-06-14

    Hi guys how can I connect my UMC22 board to my Nobsound A8 valve amplifier with AUX input?

    0 76
    • Myron2099
      DavidKnighton Hello Myron2099,
      The aux input is likely a stereo connection. This means you'll need a stereo breakout cable to connect the UMC 1/4" outputs. See the cable in the following link. This should do the trick.

      https://hosatech.com/products/analog-audio/stereo-breakouts/hosa-breakouts/cmp-150/
      • Jun 14
    • Myron2099
      Myron2099

      therefore connecting the 6.25 to 3.5 in the amplifier I have the sound output from the speakers.
      and i can hear the sounds from the imac via usb! even plugging in a microphone and using garageband?

      will i have better sound gain? is the card preamp?

      Thank you so much so my dilemma solved me

      • Jun 14
      • UMC22 to tube Valve amp
        DavidKnighton I'm not sure I understand the follow up question. If you're asking if using a microphone through Garageband will sound better, well that's a matter of opinion really, and depends wholly on your ability to mix sound.
        • Jun 15
  • DJBOGS
    Contributor - Level 1
    2020-07-15
    HI GUYS I'M GOING TO ASK ABOUT BEHRINGER NX4-6000 RMS POWER, IS THIS CORRECT? BEHRINGER NX4-6000 Specifications: • Output power (per channel, four channels): 315 watts RMS, 440 watts peak (8 ohms), 680 watts RMS, 860 watts peak (4 ohms), 1040 watts RMS, 1600 watts peak (2 ohms) • Output power (per channel pair, bridge mono): 1250 watts RMS, 1600 watts peak (8 ohms), 2050 watts RMS, 3000 watts peak (4 ohms) • Frequency response: 20 - 20,000 Hz, +0/-2 dB • Distortion: < 0.2% • Signal-to-noise ratio: > 100 dB • Power supply: 220V, 60 Hz • Dimensions: 3.5" H x 19" W x 12.2" D (95 x 482 x 310 mm) • Weight: 12.4 lbs.
    read more...
    0 232
  • mgraao
    Contributor - Level 2
    2020-03-03

    Greetings,

    I am a disabled vet on a very limited income. I own 2 Behringer NU6000DSP's that both have went bad in the last 3 years, last one occuring just days ago. The first time was under warranty and NEVER heard anything back from anyone ( believe me am persistant) I thought it would have been quicker acting with manufacturer then submitting to Sweetwater service (1st kick in the pants) Even have a repair vacility 30 miles away.... did everything except throw rocks through windows to get help! Still nothing.

    Now all this tribe stuff... I don't need a forum, I need service PLEASE! Ticket submission said response in under 24 hours (2nd kick in pants) I DJ the local VFW's/Legions for very little money and consider moving the gear my weekly cardio. So without an amp, I won't be doing any gigs which may cause my blood to thicken and I could possibly die!  I know it is a stretch, but seriously, it could happen!

    I don't want to die please help me!

    My setup...minus working amps.My setup...minus working amps.

    read more...
    1 223
    • mgraao
      RexBeckett

      @mgraao 


      Hello Bryan, welcome to the community. We are mostly users like you but we may be able to help.


       


      Did you get any email response from your most recent Care ticket submission? Some people have missed them because they ended-up in their spam folders. You should also be able to see the status of the case by clicking on Support at the top of this page. If you can tell us the Care Ticket Number, we should be able to get someone to look into it.

      • March 2, 2020
    • mgraao
      mgraao

      Thank you. Never received email from support, but instantly received one when you posted, go figure.


      Submitted 2 tickets, one from yesterday and one this morning.


      CAS-79989-H7P1T6
      CAS-79857-M3H9J0


      Thanks for the response.


      /me mumbles: Dont mind this crazy vet polishing up his window breaking stones... maybe I could make it on the afternoon news!

      • March 2, 2020
    • mgraao
      RexBeckett


      @mgraao wrote:


      Thank you. Never received email from support, but instantly received one when you posted, go figure.


      Submitted 2 tickets, one from yesterday and one this morning.


      CAS-79989-H7P1T6
      CAS-79857-M3H9J0


      Thanks for the response.


      /me mumbles: Dont mind this crazy vet polishing up his window breaking stones... maybe I could make it on the afternoon news!





      @mgraao 


      Thanks, Bryan. 


       


      I have passed the information to someone who can probably figure-out why you are not getting the support you need. Stay tuned to your emails and Private Messages.


       


      Edit: I heard from my contact. Your tickets are in the system and they are working on them. You should get some response soon.

      • March 2, 2020
    • mgraao
      mgraao

      @rexbeckett


      Your avatar tag of superhero suits you well. Thank you for your effort.

      • March 6, 2020
    • mgraao
      RexBeckett


      @mgraao wrote:


      @rexbeckett


      Your avatar tag of superhero suits you well. Thank you for your effort.





      @mgraao 


      Happy to help, Bryan. Keep on entertaining the troups.

      • March 6, 2020
  • forart
    Contributor - Level 1
    2019-05-17

    Hi everyone, since Behringer studio amplifiers are often used in home HiFi too, someone made an unofficial DIY kit to convert their look:

    A500_hifikit_1.jpg

     

    The main problem - since it's CNC manufactured - is the cost (around 120€)...

    ...it would be great if Behringer release an OFFICIAL "look conversion kit" at a reasonable price (50€ or even less) !

    read more...
    1 471