227,652 members
102,421 posts
  • New
    TC Electronic
    Triber Moderator
    Your perfect beach buddy. Designed around superb studio-grade algorithms, SKYSURFER MINI REVERB provides all the lush, transparent reverb sounds you could ever dream of – without compromising your original tone.
    List Price: $39

    #TCElectronic #SKYSURFERMINIREVERB #GuitarLove #Knowyourtone #GuitarGear #Pedals #ToneHeaven
    2 11
  • New
    Newcomer - Level 1


    Just bought a Plethora X5. I installed the latest firmware and I'm hooking it with the 4 cable method, the correct way just like explained in the following video :

    Now, when I change boards or when I switch pedals positions or when I assign toneprints, the volume goes EXTREMELY loud for a second. 

    I've seen other thread about this here but no valuable answer. This needs to be fixed as it could lead to serious hearing damage.
    I'm scared it could also damage my amp.

    I absolutely need to run this unit with the 4 cable method because some effects need to be in front of the amp while others need to be in the amp fx loop.

    I'm attaching an image of the waveform of a recording I made with my phone next to the amp. You can see the middle part where the volume jumps up is when I switch board.

    1 42
    • MitchConnely
      WilliamR Hello, William here from music tribe. This issue has just been brought to our attention recently. This has been passed to our engineers and they are looking into it.
      • Mar 10
  • New
    Newcomer - Level 1

    Hi guys,

    Just bought Ditto X2 Looper to use with my Line 6 Helix LT

    The ditto has both mono and stereo inputs/outputs.

    I want to use on the FX loop of my Helix LT, which has 2 sends and 2 returns.

    The Helix LT is stereo.

    Not sure which output on Ditto goes to which port on send return of helix.

    So I have 2 sends and 2 returns on helix and 2 mono and 2 stereo ports on ditto  anyone no how I connect and to what ports on helix please 

    Also will ts cables be ok or does it need to be trs for all 4 connections?


    Many thanks


    0 21
    • Chainsawcharlie
      PedroRodrigues Hi Chainsawcharlie ,Please consider that this pedal has two standard ¼" jack TS inputs and two standard ¼" jack TS outputs for stereo operation. If your signal source is mono like a regular guitar or a mono effect pedal, connect it to the MONO input, if your signal source or next device on the signal chain is stereo please use both ¼" jack TS on the input and on the output.
      • Mar 7
    • Chainsawcharlie
      Chainsawcharlie Many thanks for your kind reply
      • Mar 7
  • New
    Newcomer - Level 1

    Hi togehther,


    I bought a ND-1 and the last ownder did not tell me that it has some issues... 


    Issue 1: Freezing after bootig.. I guess it has to do with the EPROM wich seems to be faulty in a lot of cases on this units - I raised a Ticket for that to get a new one.

    Issue 2: I realized that 2 SMD Caps (one is C16 and onebelow the R35) on the back are broken (really broken) and the one Cap C151 next to the DSP is missing. Is there someone who can tell me the values of the missing parts?

    Is there a schematic for this device and or a service manual?

    A unit wich is below 200€ and years old is nothing I send to a repair shop as I am an electrician.

    So I hope someone cloud help me to bring this lovely piece of gear back on stage.


    Greetings from Germany



    0 25
    • LukasLange
      Dale_M Many thanks for your post but I am afraid we cannot share schematics or service documentation with non partners, we advise organising a non warranty repair with PMS in Germany.
      • Feb 21
      • Nova Delay ND-1 Servicemanual / Spareparts
        LukasLange Thanks for the reply.. but I said that a repair is uneconomic in this price range - I would appreciate I you could tell me only the values of the missing parts. that would really help me. You can send them via PM. Thank you.
        • Feb 22
  • New
    Newcomer - Level 1

    Can anyone here help me with the problematic DI pedal V-Tone Bass Driver. I bought this tool not even two months but it can't be used and it's still under warranty. Please help.

    0 26
    • EqyFranky
      EqyFranky I come from Indonesia, for a warranty claim where I can claim a warranty if I am in Indonesia.? The problem with this tool is that if the switch button is activated it doesn't make a sound, but if the pedal switch is deactivated it makes a sound. In fact, as long as I used the tool, I always used the battery and never used an adapter for operation. However, it's not even two months. This product is already problematic. Please get the info
      • Feb 15
      • V-Tone Bass Driver DI
        Dale_M Sorry to hear of this issue, it looks like a genuine fault. You will need to go back to the seller to request support in resolving this matter. I hope you can get the problem resolved.
        • Feb 16
      • V-Tone Bass Driver DI
        EqyFranky I've contacted the seller, but the seller doesn't want to take responsibility. Then where else do I have to complain ... I just want information, if I am in Indonesia where can I claim the Behringer product warranty?
        • Feb 17
    • EqyFranky
      easy How do I get the driver for x2442usb behringer mixer? I have problem in recording with it.
      • Feb 17
  • New
    Newcomer - Level 1
    Hello !
    I have a Flashback 2 and want to update it for use the stereo with tap tempo.
    I connect the pedal in usb to my PC (windows10) , then I press/hold the switch and i insert the DC plug. The LED turn on green and I ear the sound of device connecting on my computer, perfect.
    So i run the firmware update executable, the pedal is recognize and I press Update. (1)
    But it fail: after ~10% the LED starts flashing. And in 60% the progress stop, back to 0%, the LED off and Windows make the sound of disconnection and reconnection.(2) The status is "Firmware upgrade successful" but no, the features is not operational on the pedal. 
    I want to see the firmware version on my pedal, but she is not recognize in TonePrint (3) (so i can't make a tonePrint too). My Hall of Fame 2 is not recognize too.
    I've try dozens of times, with differents cable and usb port
    Someone had the same problem and/or know how fixed it ?
    Thanks you !
    0 29
    • galabix
      TC-Marcus Hi galabix!

      Even though the updater stops at 60% it should be done, I see the same thing here on my FB2. So I think your pedal actually is updated. Especially if you can still get a delay FX out of it.

      I assume you are running the TonePrint app through windows 10 too, if that is the case, try redownloading it (currently latest version is 4.4.03 as of writing this.). You can get it here

      Here my FB2 turns up just fine as highlighted by the app (see attached). I used the windows 10 64-bit version of the app and connected via the same cable as I used for the firmware update.

      If you can get that far, just follow this video for instructions on how to enable the built in tap tempo feature.

      Let me know how it turns out.
      • Feb 4
    • galabix
      galabix Hi Marcus ! Thanks you for your fast answer ! Indeed, I had miss the last version. So I have download this, but unfortunately for the same result :/ (run in normal and administrator mode)
      My flashback2 is still not recognize (my HoF2 neither), so i can't be sure if my pedal is updated

      If I correctly read the changelog, the update (of flashback2) fix the small bug regarding stereo output (in fact this is the main reason for me to do the update, more than tap tempo integrated). And that not working, so I supposed my device is not updated :(

      Do you have any other idea ?
      Thank you again and good evening !


      (btw my appologies for my english, is not my native language !)
      • Feb 4
  • New
    Newcomer - Level 1

    salut je suis en train de me monter un beau pedalboard Tc et je me demandais si vous pouviez me donner un coup de main avec l'achat de ma prochaine pedale , la quintessence!! un code promo pour un super rabais au canada ?? vos produits sont incroyable!! merci

    1 28
    • Psychework666
      PedroRodrigues Merci pour votre contact.
      S'il vous plaît noter que tout processus de vente est exclusivement liée aux partenaires et revendeurs que nous ne vendons pas d'équipement directement aux clients finaux.
      Dans cet esprit et en réponse à votre question, nous n'avons aucun type de réduction ou d'accès à des réductions car ce processus est directement géré par les partenaires.
      S'il vous plaît contactez un de nos partenaires ci-dessous.

      • Feb 3
  • New
    Triber Moderator


    This versatile pedal works equally well as a volume or modulation pedal – without tying up your hands or slowing down your performance.

    List Price: $29

    #Behringer #FCV100 #Accessories #Footswitches #Guitar #Pedal

    0 15
  • New
    Newcomer - Level 1

    The main reason why I bought tc pedal, was the ability to see dynamic response graphs (based on internet images). But the current software version doesnot show them, only knob range. Where can I find the old software version showing GAIN and DYNAMIC RESPONSE graphs? It's not on tc site anymore

    0 21
  • New
    Contributor - Level 1


    I love my Hall Of Fame 2, but there's one thing that does disappoint me: I can't get it to have a shimmer sound I like!

    A shimmer should be crystal clear, lush, dreamy… and all I get is a choir of Minions! ?

    I'm surprised to see the interval up in the editor is measured in Hz and not as music intervals (5th, octave etc…) or in cents, which would be usable.

    I just can't find how I could make this work. How do I add an octave up with Hz?

    I am using the editor version 4.3.0


    0 28
    • CyDia
      ChrisEdwards1 Hi CyDia, are you currently using one of the pre-made templates to base your shimmer reverb off or using a default/blank template? If a pre-made one could you confirm the name of the one being used?

      Thanks in advance.
      • Jan 21
      • HoF2 : Can't create a decent shimmer
        CyDia Hi Chris,

        Well this concerns the default shimmer mode as well as most toneprints. Some are slightly better than others, but they all have that "detune" sound.

        I would happily name the toneprints I tried, but the app won't show them when the pedal is unplugged… That's annoying too!
        • Jan 21
    • CyDia
      ChrisEdwards1 Hi CyDia, thanks for your response.

      Please bear with me while i take a look into this further for you. With regards to viewing the name of the Toneprints it is still possible to do this while the pedal is not connected, however, you just will not be able to enter the edit function on them.
      • Jan 21
      • HoF2 : Can't create a decent shimmer
        CyDia Ha you're right! I thought it was stuck on "getting ready".
        Thanks for your effort.
        • Jan 21
      • HoF2 : Can't create a decent shimmer
        ChrisEdwards1 Hi CyDia, Upon further investigation and after liaising with some colleagues there is no “Interval Up” parameter for the HoF2 within the editor app and the shimmer of Hof2 always uses an octave up by default. Would you be able to provide any additional information or a screenshot of the “Interval up” parameter referred to in your original post?

        Please note it is only possible to use one of the existing Shimmer templates as a starting point as only those have the "routing setup" with the octaver and Mod block feeding back into the wet reverb for the cascading Shimmer effect. The "Angelic Voices" may be a good starting point for you.

        By using the “Octaver section of the Toneprint Editor it is possible to get different tones and restrict frequency range of octave signal feeding back into the Reverb, below is an explanation of the Octaver Parameters:

        Input Filter First – Sets the starting frequency of the first Filter band (20Hz – 1kHz)
        Input Filter Spacing – Sets the spacing of the bandpass filters (50Hz – 200Hz)
        Input Filter Count – Sets the amount of bandpass filters to create the Octave up signal (1 – 80)
        Input Filter Q – Sets the peak/slop of the filter bands
        Input Filter Q Tilt – Sets how the resonance of the filter changes over the frequency range from low to high
        Q Output Rel Up – Sets how the resonance of the filter is distributed relative to the frequency
        Wet Level Up – Sets the output level of the Octaver signal
        Output Up HiCut Freq – Sets the high cut filter for the Octaver signal
        Drive Up – Sets the drive amount for the Octaver (0 – 40dB
        Enable – Toggles the Octaver block on/off
        • 1
        • ·
        • Jan 21
Go to page