What an amazing sounding synth.
Collaborate with our synth developers, share your ideas and get a chance to win free synthesizers by participating in our activities at our “Synthesizer and Drums Behringer Music Tribe" FB Group. We’d love to see you there!
https://www.facebook.com/groups/KeysandDrumsBehringerMusicTribe/
If you are a passionate and experienced mixed architecture hardware or embedded software engineer and would like to join the leading musical instrument team, please send your resume to [email protected]
#WeHearYou #behringer #MusicTribe #synthesizer #synthesizers #drummachines
Blast from the Past. Yamaha DX7II production from 1987.
Collaborate with our synth developers, share your ideas and get a chance to win free synthesizers by participating in our activities at our “Synthesizer and Drums Behringer Music Tribe" FB Group. We’d love to see you there!
https://www.facebook.com/groups/KeysandDrumsBehringerMusicTribe/
If you are a passionate and experienced mixed architecture hardware or embedded software engineer and would like to join the leading musical instrument team, please send your resume to [email protected]
#WeHearYou #behringer #MusicTribe #synthesizer #synthesizers #drummachines
I have found the source of the crippling midi issues I have been having with my vc-340. For a long time I have been bitterly sad that I have been unable to use my vc-340 as a midi controller- this was one of the reasons I bought it as it has a large, pressure sensitive and well weighted keyboard. Every time I have used it I have got random sustained notes that don't stop until I restart the recording or reset the midi. I have recently narrowed down what the issue is: using a midi tracking program, I found that when these hanging notes happen, the vc340 is sending two of the held note's note on messages but not accounting for the extranious second message afterwards, so it sends two signals to turn on the note but only one to trun it back off, so the socond note contiues to ring. This issue makes it impossible for me to fully enjoy the extent of the keyboard, and though I do love the synthesisor portion of the vc-340, this issue frequently stops me from using it and leads me to resent it.
Please Behringer, fix this issue.
From an avid lover of your synthesisers.
I found a bug in the DeepMind, can you reproduce it ? Let us know !
In short : 3 unison LFOs with a phase spread trigger the VCF envelopes.
From a default program (PROG + COMPARE) :
- VCF envelope : trigger by LFO 2; decay 70; sustain 0;
- VCF panel : LFO fader 0; ENV fader max; FREQ fader 0
- VCA and VCF edit menu : sensibility to velocity set to 0
- Polyphony set to 3 unison voices
- LFO 2 edit menu : rate 100; Key Sync ON; Phase SPREAD 70;
Or the SysEx for the Edit Program at the end (replace the program that you are currently editing).
Press and sustain a key and listen carefuly, mostly at start when you press a key.
Your voices are also stacked/mixed at start ? Like in the picture below :
p.82 of the manual we have "LFO-2 - This option will force the envelope to be triggered each time LFO 2 starts a new cycle."
In my experiment all the LFOs have the same duration, if they start together they end together. If they start spread they end spread. And the cycle repeats itself. This is not what one observes, the first cycle is different from the others.
SysEx :
F0 00 20 32 20 00 04 07 00 00 00 01 00 00 00 00 00 64 00 01 01 00 47 00 00 01 01 00 00 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05 02 02 00 00 00 00 01 7F 00 00 00 01 00 00 60 00 01 00 00 00 00 7F 15 00 00 00 00 00 00 00 54 49 00 00 02 00 00 00 5C 00 00 00 00 00 00 00 5A 00 00 00 7F 7F 00 00 00 02 02 00 00 00 00 00 11 00 01 00 00 00 00 00 49 00 00 00 00 00 00 00 24 00 00 00 00 00 00 00 12 00 00 00 00 00 00 09 70 0E 00 02 00 00 00 00 7F 00 00 00 00 00 00 00 7F 00 00 00 00 00 00 00 7F 00 00 00 00 00 00 00 7F 00 00 00 00 00 00 00 41 00 00 00 78 09 01 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 64 64 64 01 44 00 65 66 61 75 6C 74 20 00 50 72 6F 67 72 61 6D 08 20 00 00 00 00 00 00 F7
Ciao! Buonasera Synthomani.
Vorrei usare la TD3 come modulo sonoro. Usando una Korg Electribe MX (blu valvolare) come master. Ho provato gia a premere tap back insieme premendo il canale 2 ed è andata in clock tempo e fin qua tutto ok. Adesso (Vedi foto allegata) ho seguito tutta la pricedura dalla macchina Sia di impistazione canale midi e Sia messaggi midi impostando i filtri ma non riesco a trasmettere nulla. Come potrei fare? Vi chieso aiuto. Scusate grazie Sono alle prime armi! Buona Sera a tutti
Dear all,
I have recently purchased a TD-3-RD online.
I have connected it via USB cable to my PC to Ableton Live. I have configured Midi out to my TD-3 to play Midi Clips out of Ableton on my TD-3.
Problem: Those 16th hits of my TD-3 are totally off grid and out of sync. The first 16th note is always to long, the other 16th are way to late and off grid. If I move them fordward later notes are to late or to early.
Does anyone has the same problem? I have read online from more people with this issue.
If there is no proper fix I will return it unfortunately.
Best regards,
Marcel