Statistics

253,489 members
131,052 posts
  • New
    JohnMilner
    Super Contributor - Level 2
    2021-09-20

    The App allows control of all the parameter of the Behringer X32 and Midas M32 series of consoles:-

    https://apps.apple.com/app/32pro-mx/id1574933248

    read more...
    0 6
  • New
    CrisBonis
    Contributor - Level 3
    2021-07-27

    This app is 100% CLEAN and 100% FREE

    Get your copy of VISUAL CHECK @ https://www.dacris.it/visc/index.html

    Digital mixer software test for all Encoder - Button Fader - Display - LED via LAN network

    This is a last beta, Pre-official release, Please if you find any kind of error send an e-mail with
    detailed error report to [email protected]

    Thank you @ all for the error/bug feedback support.

    Cris Bonis Italy

    https://www.dacris.it/visc/index.html
     

    read more...
    0 28
  • New
    Seveneke
    Newcomer - Level 1
    2021-05-24

    Hi,

    I have 2 TD-3's & one Crave and I like to use the Synthtribe sequencer a lot to create or back-up my sequences.
    This works great for the TD-3.
    Edit a sequence, press "store" and the pattern will instantly refresh while it's playing.
    - With the Crave I have to switch to another pattern on back to have it refresh (not a big deal.-).

    Also, for the TD-3 you can create a dump file. Containing all the sequences stored on your machine which is great as back-up and it can be imported later on or on another TD-3 should you wish to.
    - This option is not available for the Crave.

    One final question in general about the sequencer: why is it not possible to resize it? I saw different Youtubers complaining about that & I find it pretty annoying too.

    Could this be implemented as well in a future update?
    Thank you for your response.
    Have a nice day :-)

    read more...
    0 99
    • Seveneke
      NicJonesMT Hi Seveneke.
      If possible could you please click Support at the top of the page and submit a technical support ticket about this. We can then try and get this sorted.
      • May 24
    • Seveneke
      Seveneke

      Hi NicJonesMT,
      Thank you for your suggestion.
      Ticket created!

      Have a nice day!

      • May 24
    • Seveneke
      Seveneke Well, I thought I'd have a look, and the ticket has been set to "solved".
      No email or whatsoever... what a bummer!
      • Jun 9
  • New
    MrArkadin
    Newcomer - Level 1
    2021-04-05

    I feel pain every time I try and navigate this site.

    So I am trying to register VSS3 in the hope of being to download the new version (which I'm sure will be another rigmarole). I cannot register VSS3 because the brand drop-down does not work (see attached pic).

    I had to jump through hoops to even register this account, now I can't actually do anything. I cannot even create a support ticket because that also needs the brand selecting, so I cannot even contact support to tell there is an issue with the support form! Genius. 

    I woud like to add this is the most awful portal I have had the misfortune to use. Finding this forum is a chore, and I couldn't even post earlier for some reason. Please tell me someone is working on improving it.

    read more...
    1 84
    • MrArkadin
      Nigel67 Hi MrArkadin. I am very sorry for the inconvenience that you are experiencing. I have notified our web team and they will be looking at a fix for the issue you are experiencing. In the meantime, I will open a case for you and send an e-mail. You should receive it shortly. Please also check your Spam / Junk folders to make sure it hasn't gone in there. Apologies again.
      • Apr 5
      • VSS3 product registration
        Nigel67 E-mail just sent
        • Apr 5
  • New
    Tmatomas
    Newcomer - Level 1
    2021-04-04

    No receipt either

    ilok: tmatomas

    email: [email protected] 

     

    1 40
    • Tmatomas
      PedroRodrigues Hi Tomas Please log in your ILOK ACCOUNT as the MD4 HD NATIVE was activated on the Mon Apr 05 2021 11:19:26 GMT+0100 (British Summer Time). Thank you
      • Apr 7
  • New
    Kuli
    Newcomer - Level 1
    2020-12-06

    When trying to connect my X air 18 mixer with Ableton live trial the

    preferences show the results below.

    I repeatedly downloaded the usb-driver from Behringer´s download page

    but it has failed to work so far.

    Ì am far from being an experienced engineer , so who can help me with

    amateur friendly advice?

    Thank you and stay healthy

    Kuli

    read more...
    0 91
  • New
    rgast5150
    Contributor - Level 1
    2020-10-31

    Hi!

    I received my link for the Polytune Plug-In I bought and the link to download it doesn't work.

    A little frustrated...

    Thanks!

     

    0 73
    • rgast5150
      Nigel67 Hi, I am sorry to hear that the link you were given is not working. I will contact the relevant people and find out why. We were making some updates over the weekend. This could have been the cause of the issue. Can you give the link another try?
      • November 1, 2020
      • Download links not working.....
        Nigel67 I am going to send you an e-mail with a new link.
        • November 2, 2020
    • rgast5150
      rgast5150 Hi Nigel,Just tried again, same results..."It seems we can't find the page you're looking for."
      • November 2, 2020
    • rgast5150
      rgast5150 Hi Nigel! Found the new link, it went to my junk mail. That worked and I was able to install the plugin. Thanks for your assistance!
      • November 2, 2020
      • Download links not working.....
        Nigel67 No problem, sorry for the issue in the first place.
        • November 3, 2020
  • lpagross
    Newcomer - Level 1
    2020-08-29

    I'm using the X32 Edit software to control my X32 Rack & there's a question I'd like to ask. I understand that the Mix Bus can be tapped after the input, before the EQ, after the EQ, before the fader & after the fader but what does Sub Group mean on the Sends tab?

    read more...
    0 340
    • lpagross
      Paul_Vannatto Subgroup is basically post fader with unity (0 db) fader levels. It emulates the analog console subgroups.
      • August 29, 2020
    • lpagross
      CraigFowler The other key difference between the post-fader vs subgroup setting is that if using the subgroup tap, (by default, assuming the subgroup is stereo,) the ch>subgroup pan will follow the ch>LR pan. If instead you choose post-fader, you can specify a different pan for ch>bus vs ch>LR.
      • August 29, 2020
    • lpagross
      lpagross How can you set up a subgroup master fader in X32 Edit 4.1?
      • August 29, 2020
    • lpagross
      CraigFowler Bus\Mtx layer button on the LHS of the app, you'll get your faders. Alternatively, select the relevant bus using the buttons on the LHS of the app, and the master fader changes to the fader for that bus.
      • August 30, 2020
      • X32 Edit software mix bus taps
        lpagross So a subgroup master is the same as a mix bus master?
        • August 30, 2020
    • lpagross
      CraigFowler Yes. The console has 16 mixbuses (+ mainLR, M\C, mtxs, and solo.) The 16 buses can be configured (in pairs) as pre-fade, post fade, or subgroup, or some combination.
      • August 30, 2020
      • X32 Edit software mix bus taps
        lpagross So the input tap to the mix bus is the output of the mix bus… I'm sorry, I'm not following.
        • August 30, 2020
  • lpagross
    Newcomer - Level 1
    2020-08-26

    What does the "Changes affect selected Channel" vs "Changes affect all Channels" do in the Sends tab? Also, above this I think you can choose where to tap the bus from, but this isn't updated on the Routing tab (as far as I can see). Am I right?

    read more...
    0 77
    • lpagross
      RexBeckett When Changes affect all Channels is on, if you change the signal tap for a bus send it will be changed for all channels (1-32 + Aux 1-6 + FX Returns 1-4). Otherwise the change only affects the selected channel.The signal taps on the Sends tab are the points within the channel processing for the send to the bus. The signal taps shown in the routing tables are for outputs from the bus or channel.
      • August 26, 2020
      • X32 Edit Sends tab
        lpagross Aha, that's great. I confirmed the "Change affect all Channels" by switching it on, changing the vocals to Post EQ & then jumping to another channel. I expected it to be all Mix Bus Channels, it's the channels of the desk :-)
        • August 26, 2020
      • X32 Edit Sends tab
        lpagross I confirmed the signal taps being to the bus by listening to the output from a bus (rather than the main output or the control room output) and changing the output to that bus from pre-fader to post-fader then moving the Main LR bus fader. It works as expected, thanks so much.
        • August 26, 2020
    • lpagross
      lpagross It's a shame that the Sends tab doesn't have an extra "mute" button for each mix bus so that you could route to headphones & not mind about the Mute button on the Main LR bus. It still affects the mix buses :-(
      • August 26, 2020
    • lpagross
      RexBeckett I don't understand how you want the mutes to work. You can mute each Mixbus separately - although not on the Sends tab.
      • August 26, 2020
      • X32 Edit Sends tab
        lpagross When I mute a channel in the Main LR bus it is muted in the Mix bus (which I'm using to feed IEMs for each musician), which isn't how I'm used to working. If I have chosen pre-fade for a headphone feed & I then mute the channel on the Main LR bus (for a few seconds say, to focus on something else) I don't expect it to have any effect on the headphone feed. Perhaps the sends tab could adopt the colour scheme of the routing tab if space is an issue?
        • August 26, 2020
      • X32 Edit Sends tab
        RexBeckett OK, I understand. Yes it would be nice if the channel mute behavior was configurable to suit personal preferences. As it is, it is better to take channels out of the Main mix by pulling down the fader. If you need to mute some channels on a regular basis, you could assign them to a DCA group and mute that.
        • 1
        • ·
        • August 26, 2020
    • lpagross
      GaryHiggins There is a work around for this. Make sure the DCA groups checkbox is NOT checked on the setup/mixer/mute system page. Then if an input ch belongs to a DCA group and the DCA is muted, ONLY the sends to mains are muted NOT the bus sends. This is the setting to use to allow monitors to remain active while FOH ch's remain muted. Make a DCA group that includes all your desired main ch's and use that DCA mute to mute/unmute the mains, the buses will not get muted. If the DCA groups box is checked off, it acts like a master mute for DCA's and will mute the participating ch's everywhere.
      • August 26, 2020
    • lpagross
      lpagross The DCA mutes are a useful work around, thanks.
      • August 26, 2020
  • lpagross
    Newcomer - Level 1
    2020-08-21

    When I'm in the EQ page I often have the Real Time Analyser turned on. Whenever I choose the LR Bus it flips to display that analysis in the EQ page, but when I choose a channel it continues to display the LR Bus analysis until I change something in the channel, then the RTA displays correctly. I say correctly, but maybe I'm missing something, is there some advantage to displaying the LR Bus analysis? This is in X32 Edit 4.1, not on the front panel of the X32 Rack.

    read more...
    0 297
    • lpagross
      GaryHiggins Maybe it's the rta settings? When connected to your mixer, hit utility/rta. Not totally sure what you are wanting but maybe something in there (esp with rta source) explains it or changes it to what you want?
      • August 21, 2020
      • X32 Edit 4.1 RTA
        lpagross That was it, thanks. I had Main selected as the RTA Source, changing that to Selected Channel displays whatever channel I select as the RTA source, in fact as it says on the page. Great piece of software.
        • 1
        • ·
        • August 21, 2020
Go to page