289,847 members
172,411 posts
  • New
    TC Electronic
    Triber Moderator


    Get a more informed starting point that will ultimately allow you to make better calls when mixing and mastering your productions. Once you have installed your MONITOR PILOT, you are set for seamless and transparent switching between speakers, as well as clear visual indication of which speakers are currently active.

    List Price: $149.00 (in stock and immediately shipping from our factory)

    #TCElectronic #MONITORPILOT #PassiveStudioControllers #MonitorControllers

    2 31
  • New
    Triber Moderator
    Ideal solution for home or professional studios, or as part of a larger setup. Premium, ultra-low noise components and high headroom lets your music shine at its best – this is especially true for one of the most critical sources: Vocals!
    List Price: $249
    #Behringer #STUDIOXL #StudioControllersAndMeters #MonitorControllers #ActiveStudio
    1 266
  • New
    Triber Moderator
    Comes with two state-of-the-art Midas microphone preamplifiers with +48 V phantom power, ultra-low noise, high gain and audiophile quality. The STUDIO L is the ideal solution for home or professional studios, or as part of a larger setup.
    List Price: $199

    #Behringer #STUDIOL #StudioControllersAndMeters #MonitorControllers #ActiveStudio
    1 287
    • Behringer
      MarcAbernathy any update on when this will be avail at US outlets?
      • July 20, 2021
    • Behringer
      danyrockjr Hi,
      Can you tell me if the STUDIO L is DC coupled and if so what is the voltage?
      Thank you very much for your answer ;)
      • July 28, 2021
      • Behringer New Product Release: STUDIO L
        Behringer Hi danyrockjr, thanks for reaching out!

        The STUDIO L comes with a 12V DC 2000mA power supply and it runs from 100-240V at 50/60 Hz.

        I've attached the link to the product page for your convenience. You can check the product's specifications under the "Specifications" tab if there's anything else you want to know about our product.

        • August 2, 2021
  • New
    Triber Moderator


    Premium Passive Studio Controller

    List Price: $49

    #Behringer #STUDIOM #Passive #StudioController #MonitorController #VolumeController #MonitorSwitcher #HighQuality #BestValue

    1 123
  • New
    Newcomer - Level 1

    I recently bought the LM2n Plugin, but it doesn't work properly in Logic Pro. The Radar GUI is displayed 1/4 of the size in the lower-left corner. I contacted Apple and they told me that it needs to be upgraded to support "apply scaling factor for retina".

    The current version is from 2018 and I'm wondering if the Plugin is still supported or EOL.



    0 145
    • EdgarRothermich
      KyleJohnson Hello, Kyle here with Music Tribe. In order for us to assist with this issue we will need more information from you. Could you please contact us through the Support>Technical Support portal at the top of the page?
      • April 24, 2021
    • EdgarRothermich

      There is a bug report on 2021/4 in the discussion below.
      It's been over a year and there are no updates.

      • May 21
  • New
    Newcomer - Level 1

    I have a CONTROL2USB I bought a few months ago. The volume control is malfunctioning..... when the system is off it’s still bleeding music, and making a cracking soumd

    0 122
    • Dj30a
      DavidKnighton Hello Dj30a,
      This item will require service. Please click the SUPPORT tab at the top of the page and submit a SERVICE REQUEST case.
      • April 17, 2021
  • New
    Contributor - Level 2

    Hello guys,

    Could somebody help me to find out the possible manufacture date of Konnekt 48 device I've purchased recently? Its Serial Number is (21) 10070257 and TC Item Number is 967300051. Another interested detail that OPTO and ADAT toslink ports have different design, OPTO ones have no covers, but ADAT ones have doors. I've attached a photo of the internals as well (can provide more, if needed).


    0 116
    • goodtime_vs
      goodtime_vs More photos:
      • April 9, 2021
    • goodtime_vs
      PedroRodrigues Hi goodtime_vs please consider that from your serial number I think your unit was manufactured in 2007 but I cannot confirm this information
      • April 14, 2021
      • Possible manufacture date of Studio Konnekt 48 audio interface
        goodtime_vs In case anybody needs it, the latest firmware is installed with the drivers and located here: C:\Program Files (x86)\TC Electronic\TC Near\Firmware
        • 1
        • ·
        • April 16, 2021
  • New
    Newcomer - Level 1

    I have a brand new out of the box unit that will not boot past the "clarity m" logo. Everything is still boxed from factory... I am beyond disappointed. Is there any hard resets? Or anything I can try on my end? Or a hardware repair? What's the warranty on these things? :(

    0 143
    • Wellroundedproductions
      Nigel67 Hi, i am sorry to hear that you are experiencing issues on your product straight out of the box. If it is still under 30 days old, then I would advise contacting the shop that you purchased the unit from and ask for DOA replacement. If it is over 30 days old, then please click on the support tab at the top of the page. In the new page that opens, scroll down and click on the Service tab and submit a ticket. I would not advise opening the unit in any way as this will void your warranty. Have you tried connecting the unit to a computer and seeing if you can upgrade the software? Please check this link for upgrading. There are also instructions in the user manual.
      • February 1, 2021
      • “Clarity M Stereo”
        Wellroundedproductions Unfortunately it won’t boot to the point where I can put it in usb mode. Yes this is a bran new item. Unfortunately it sat in the box unopened for more than 30 days really bummed. I submitted a ticket but this suckssss
        • 1
        • ·
        • February 2, 2021
      • “Clarity M Stereo”
        Nigel67 I can only apologise again. One of my colleagues will take care of the repair details for you. This is definitely not to the standards that we strive to meet.
        • February 2, 2021
    • Wellroundedproductions
      GoosesGaggle123 i am having the same issue, any advice?
      • April 8, 2021
  • New
    Newcomer - Level 1

    Hello my Logic Pro X doesnt want to open because of Clarity M when I open it since I did the Big Sur update.
    All the other plugins are fine, this is the only plugin which doesn't work.
    I need to desintall it for Logic Pro X to open.
    Can you help ?


    1 360
    • Estebanmerlin
      KyleJohnson Hi Esteban, Kyle here with Music Tribe. First, make sure your Clarity M Plugin and Firmware are both fully updated. If you are still having issues, please contact us by submitting a Technical Support ticket through the Support link at the top of the page.
      • December 7, 2020
    • Estebanmerlin
      Oldman Привет! Столкнулся с такой же проблемой, в как точно описано все ( Не могу найти решение. Если оно уже есть, пожалуйста, сообщите, что делать? PS: Apple Apple Mac Pro (2013 2013 года), OS Big Sur.
      • January 2, 2021
      • Clarity M - Mac OS Big Sur
        KyleJohnson Hi Aleksei, please make sure that USB mode is set to "Plug in". Then please also confirm that you have updated your firmware and the plugin software to the most recent versions. If you are still experiencing problems please submit a case through the support link at the top of the page.
        • January 4, 2021
      • Clarity M - Mac OS Big Sur
        Oldman Hello Kyle!

        Unfortunately, the problem with the plugin was not solved (although almost 2 weeks were devoted to correspondence with technical support)... Plugin Clarity M still crushed Logic Pro 10.6.1. Again, if disabled and disconnected device Clarity M USB active as plug-in Clarity M in the project, the plugin does not allow to load the project and Logic Pro crashed. Mac Pro 2013 macOS Big Sur workstation. Before switching to the new OS, there were no problems with working via USB Mode: Plug-in. On the MacBook Pro 2019 Intel there are no problems and everything works fine (connect via USB-C HUB 3.0).

        And one more detail: the clarity_m_v2_0_1_mac.dmg installer does not deliver *. component,*. v stand *. vst3 files in their own directories.

        If someone on the forum faced such a problem, tell me in what direction to look for a solution?
        • January 14, 2021
      • Clarity M - Mac OS Big Sur
        Estebanmerlin Same problem !
        Can you please do something about it ??
        • January 29, 2021
    • Estebanmerlin
      Estebanmerlin Still nothing guys ?
      • January 29, 2021
      • Clarity M - Mac OS Big Sur
        KyleJohnson Hello, we have tested the Clarity M on multiple Big Sur machines without issue, so it is not an incompatibility problem. I have one sitting on my desk, right now, working with Big Sur on an iMac. If you are having issues, please submit a technical support ticket through the Support link at the top of the page. Always make sure you are on the latest firmware and plugin versions, and make sure you are connecting directly to a USB port on the computer, bypassing any hubs for best results.
        • January 29, 2021
    • Estebanmerlin
      syntaction Hello there!

      Unfortunately I have the same issue like the thread starter. Since MacOS Big Sur and Logic Pro 10.6 the Clarity-M Plugin crashes the DAW even on startup.

      My configuration is:
      Clarity-M Plugin: v2.0.1
      Clarity-M Firmware: v2.0.3
      Direct USB Connection
      USB Mode set to Plugin
      macOS Big Sur 11.2.1
      Intel Mac (i7, Late 2015, 32GB RAM)
      Logic Pro 10.6.1

      I noticed the following things when I tried to fix the problem (for example by reinstalling the Plugin etc.)

      - Crash also happens if Clarity-M is switched off, so the Plugin itself crashes. If you clear the AU Cache it also crashes when Logic tries to rescan the Plugin

      - If you reinstall the Plugin again it sometimes works again in the DAW but as soon you reboot your machine completely it crashes again

      - The VST2 Version of the Plugin seems to work (VST2 Host, so maybe a Logic/AU exclusive Problem?)

      - The Plugin has to be part of a project you open when you start logic to make it crash

      I really hope this helps you to reproduce the error and update the AU Plugin. I really love to use the device via Plugin because that saves me a complicated audio route and on my mobile setup it's also much more flexible via plugin.

      The setup worked by the way on the same computer with the same plugin environment on the previous macOS & Logic Pro version, so Big Sur or Logic 10.6 was the issue here I guess.

      When reinstalling the Plugin I also tried to remove it entirely first and cleaned the AU Cache, so there should not be an issue with maybe old or corrupted drivers (or better plugin files) here. It only does not crash Logic with a lot of luck then.

      - Chris

      PS: While I'm here I also have a little feature request: It would be really cool if you could integrate Clarity-M Support via Plugin Like Connection to the tc electronic Finalizer Software. Would really be a handy addition! :)
      • February 17, 2021
      • Clarity M - Mac OS Big Sur
        KyleJohnson Hello, Thank you for this report Chris. Can you please submit all of this information as a Technical Support case through the Support link at the top of the page?
        • 1
        • ·
        • February 17, 2021
      • Clarity M - Mac OS Big Sur
        syntaction Thank you for the fast reply, Kyle! No problem, I will submit the infos via the Support system.
        • February 17, 2021
    • Estebanmerlin
      jansolo Hello, I have the same problem… If the clarity M module is on off, Logic crash…: Process: Logic Pro X [3109]
      Path: /Applications/Logic Pro Pro X
      Version: 10.6.3 (5458)
      Build Info: MALogic-5458000000000000~3 (10U159)
      App Item ID: 634148309
      App External ID: 841990097
      Code Type: X86-64 (Native)
      Parent Process: ??? [1]
      Responsible: Logic Pro X [3109]
      User ID: 501

      PlugIn Path: /Library/Audio/Plug-Ins/Components/Clarity M.component/Contents/MacOS/Clarity M
      PlugIn Identifier: com.tcelectronic.audiounit.ClarityM
      PlugIn Version: 2.0.1 (63)

      Date/Time: 2021-08-17 10:40:09.738 +0200
      OS Version: macOS 11.2.3 (20D91)
      Report Version: 12
      Anonymous UUID: B0E040BE-12F8-6997-5CFD-32CD8527ECC3

      Time Awake Since Boot: 2400 seconds

      System Integrity Protection: enabled

      Crashed Thread: 111

      Exception Type: EXC_BAD_ACCESS (SIGSEGV)
      Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
      Exception Note: EXC_CORPSE_NOTIFY

      Termination Signal: Segmentation fault: 11
      Termination Reason: Namespace SIGNAL, Code 0xb
      Terminating Process: exc handler [3109]
      • August 17, 2021