Statistics

223,681 members
97,898 posts
  • New
    DonShahcapo
    Newcomer - Level 1
    2021-03-27

    My audio interface was working right...i left the house and came back in 30minutes...now its blinking and making noise as it blinks....what should i do? What is the reason?

    Im using it in usb and windows 10

    0 33
    • DonShahcapo
      Nigel67 Hi Don. This looks power supply related. You will need to get the unit serviced. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Service tab and submit a ticket. A colleague will then get back to you with an RMA number and advise the local service centre to you.
      • Mar 27
  • New
    Kniilant3i
    Newcomer - Level 1
    2021-02-17

    Greetings fellow tribesmen ^^ i own a behringerxr18 for about 7months and now when its on for a while, the fader turns to fly un and down . Mostly around the 13-16&aux channel as well as the bus sends . Has anyone had this experience?? Thanks ahead for your concern 

    read more...
    0 55
    • Kniilant3i
      PedroRodrigues HI Kniilant3i I would suggest to confirm if you are running the latest version of the OSX and if that is the case I would suggest to test the App with an older version of the OSX, if possible, please confirm if you have the latest version of the App .
      • Feb 17
      • Behringerxr18 fader not stable
        Kniilant3i Thanks Pedro for your response. Im currently on the latest app on both android and OSX.. when the faders start to fly, im not able to use them but to use just the buses and even with that, buses 5 and 6 . Luckily for me, im mostly using it inside the studio for band tracking so i mostly get away with basic headphone sends. When the faders starts to fly, on any device thats connected to it you see the flickering ... its a very bad experience for me. I previously had the X18 untill my band drummer was like i like the board so i handed it to him to get the XR18 and now im suffering with flying faders.....
        • Feb 17
  • New
    rccgmountzion
    Newcomer - Level 1
    2021-02-01

    I'm having a bit of trouble with my PA system. During our church service we had several loud pops almost like a gunshot. 

    0 67
    • rccgmountzion
      Paul_Vannatto What mixer are you using?
      • Feb 1
    • rccgmountzion
      rccgmountzion I am using Behringer X32
      • Feb 1
    • rccgmountzion
      rccgmountzion Thanks Paul
      I wish u could help me
      • Feb 1
    • rccgmountzion
      Paul_Vannatto Is the X32 connected to a stagebox (eg. S16, SD16, etc.) with an AES50 cable? If so is the cable shielded and with Ethercon ends on each end? If so, check for ground continuity between Ethercons.
      • Feb 1
    • rccgmountzion
      rccgmountzion It is connected to S16's connected with cat5 cable and not shielded also no Ethercon
      We have been using it for years and there is no issue
      • Feb 1
  • New
    DanilKozyar
    Newcomer - Level 1
    2021-01-30

    Why Behringer Wing (brand new out of box) makes whining noise when powerd?


    View Video
    0 19
    • DanilKozyar
      GaryHiggins Hope you can return it and get another easily, this is an issue I have not heard reported so far.
      • Jan 31
    • DanilKozyar
      Rpj2021 My Wing is brand new and after only a couple of on-off reboots while uploading firmware it no longer turns on at all. Mine did not make any noise though.
      • Mar 30
  • New
    danbaileyak
    Newcomer - Level 1
    2021-01-29

    Hello, I recently purchaed an X Touch One, and according to the instructions, I should be able to use a standard midi sustain pedal as a record-toggle footswitch with Logic Pro X. However, when I plug a pedal into the jack on the back of the unit and press the footswitch, the unit seems to get confused. It gets stuck in a glitchy recording loop inside Logic Pro, and the lights on the X Touch One go all haywire. The only remedy is to power off the unit and unplug the footswitch.

    I've tried using two different footswtiches, both standard 1/4" midi sustain pedals, and the unit exhibits the same behavoir, no matter which one is connected. Please note, I'm running the X Touch One firmware to the latest version (v.1.08) and using the X Touch One in the Logic configuration.

    Am I missing something? Is there anything specific I need to do inside Logic to properly set up the unit so it recognizes the record-toggle command doesn't get confused? Or do I have a defective unit.

    Thanks,

    Dan B.

    read more...
    0 80
    • danbaileyak
      PedroRodrigues Hi danbaileyak, I believe you have the unit on MC mode to operate with LOGIC have you tried to set up the unit in MIDI mode to control your pedal.
      If you are using the X-TOUCH ONE in a MIDI mode, select it in your DAW as a MIDI controller. Please confirm with your DAW’s MIDI Learn functions, and you will be able to map each button and feature of the X-TOUCH ONE to a function and control on your DAW.
      Please assign the unit to MIDI mode and please confirm that you have assigned the following message for your pedal as per below :
      MIDI Send CC
      Foot Switch: Control Change 64 (push: value 127, release: value 0)
      MIDI Send Note
      Foot Switch: Control Change 64 (push: value 127, release: value 0)
      I hope this helps
      • Jan 29
    • danbaileyak
      danbaileyak Thank you for getting back to me. I am currently using the X Touch One in LOGIC Mode. I prefer to use it this way, so that I don't have to reassign all of the buttons on the unit. By default, in Logic Mode, Pedal A is set to "Play or Stop," but as you saw in my video, this doesn't seem to work correctly. If I plug the footswitch into a different midi interface, I can get it to work just fine, so that's why I'm wondering if there's something wrong with my X Touch One, or if it simply doesn't work properly with the sustain pedal footswitch.
      • Jan 29
      • X Touch One Footswitch Problem
        PedroRodrigues Hi danbaileyak, form your description it seem that this is a matter that is related with your DAW MIDI implementation, as you stated the unit work with the Pedal work just not the way you wish to implement. I this case I would suggest to search for information on LOGIC support. Thank you
        • Feb 2
  • New
    EdwardJonathanBlakeley
    Newcomer - Level 1
    2021-01-24
    1 55
  • New
    Behringer
    Triber Moderator
    2021-01-05
    0 60
  • New
    Tinkertra1n
    Newcomer - Level 1
    2020-11-29

    Hi,

    I've made a patch where the OSC2 level is controlled by the note number in the mod matrix, so that the level increases the further down the keyboard you play. This works fine for single notes, but if I play a sustained high note and then hit a low note, the OSC2 level increases for the high note as well. Is this a bug or a feature? It seems like a bug to me. Can anyone else confirm this?

    Steps to reproduce:
    1. Create a default program
    2. Assign Note num to OSC2 Lvl in the Mod matrix, set Depth to -128 (repeat this step for a more pronounced effect.)
    3. Play a high note, like C6, and sustain it.
    4. Briefly hit a low note, like C3, and listen for the OSC2 on the high note.

    I've attached an audio example

    read more...
    0 43
  • New
    Tinkertra1n
    Newcomer - Level 1
    2020-11-28

    Hi,

    I've noticed that the decay does not behave as expected when setting the decay curve to +50% (255). At the end of the decay period there is an extra hump right before the envelope enters the sustain phase. Can someone else confirm this? Is it a bug or is it just my DeepMind 12 that is acting up?

    Steps to reproduce:
    1. Create a default program
    2. Set VCA sustain to 0
    3. Set VCA decay curve to 50% (255)
    4. Play a note and let it decay fully.

    I've attached an audio example.

    read more...
    0 57
  • New
    jepoy0811
    Newcomer - Level 1
    2020-11-01

    Im just singing and suddenly it stop. Shown at the video

    0 66
    • jepoy0811
      Nigel67 Hi John, is the unit cutting out, or is the problem just with the LEDs flashing on and off? Either way, I am afraid that your unit will require servicing. Please go to this link and submit a service ticket and we will be able to book your unit in for repair.
      https://community.musictribe.com/pages/create-new-ticket?type=service%20request
      • November 1, 2020
    • jepoy0811
      jepoy0811 Thanks Nigel for your reply. it just suddenly stop and LED starts tripping. Cant produce sound anymore\
      • November 2, 2020
    • jepoy0811
      Nigel67 If the audio stopped as well, then it looks power supply related. I think that you will have to submit a service ticket using the link I gave you above.
      • November 3, 2020
    • jepoy0811
      rockylive This issue happen to me as well. Replaced 2 units because of this. Please fix this or give us a proper solution. At least some technical explanation of the issue.
      • December 1, 2020
      • My Behringer Europort EPS500MP3 just stop
        Nigel67 Dear Rakitha. I am afraid that I am not part of the QA Team and do not know the full story, but it does appear that an investigation has begun and I would suggest that maybe in the new year you contact the local repair centre to where you live and ask them if a bulletin has been released for the psu in your unit. Sorry I m not able to give you more information at this time.
        • December 2, 2020
Go to page