223,680 members
97,897 posts
  • olsi78
    Newcomer - Level 1

    Hi, when i switch the speakers on, there are a few ticks and about 8 sec. later follows a awful noise!

    The speakers are about 4-5 years old.

    Is there a chance to repair them?

    0 50
    • olsi78
      leah Hi @olsi78 ,

      We'll be glad to help you with your speakers! Please start a Care Ticket by clicking the Support link at the top of this page. On the Support page, scroll to the bottom to submit a Technical Support or Service ticket.

      • October 7, 2020
  • Behringer
    Triber Moderator
    2 109
  • Behringer
    Triber Moderator
    0 64
  • mmurano13
    Newcomer - Level 1

    I use Logic X and have had this interface for a few months.  All of a sudden when I was trying to record some tracks, I was getting a digital frequency ringing that comes and goes as I test my input levels.  I have switched usb cords, I have made sure there are no other wires touching the interface.  I have tried switching out XLR and quarter inch input cables and they still give me this weird intermittent frequency buzzing sound.  When I try and record in Logic the buzzing sound was actually recorded and you can see the wave form of the noise.  Does this sound like an internal hardware malfunction in the interface?  Thanks for any help in advance.    


     I attached an audio sample of my snare drum but you will hear the high pitch frequency interfering with the track.   

    *Warning- very noisey so listen with low volume

    0 33
    • mmurano13
      PedroRodrigues Hi mmurano13 Please submit a assistance request by following the link below so we can help you on this matter
      • August 17, 2020
  • Someonelikeyou
    Newcomer - Level 1

    Hi People. 
    So there is something strange about the behavior of my PD. If I play a 3 note chord in Poly mode, 50% of the time I will get some random notes??

    If I press and hold 1,2,3,4 notes the 4th note is fixed wherever I play it on the keyboard. 
    i have trouble shooted as much as I can but now I am thinking of returning the unit....

    Any ideas?

    Am I missing something?

    View Video
    0 13
  • goldstrike
    Newcomer - Level 1

    Hello all

    I have an X32 Producer mixer. Everything worked absolutely fine, until after a couple of months of usage I heard one loud clipping noise over the speakers and since then the mixer has some weird pulsing and clipping on every input channel. (video for reference)

    I tried restarting, resetting, updating, unplugging, exchanging every cable, but nothing helped.

    Does anyone know something about this, or is this a guarantee issue?

    View Video
    0 20
  • Behringer
    Triber Moderator
    This is the Behringer System 100 182 SEQUENCER Module. A 2-channel 8-step analog sequencer with each with its own control voltage knob and global Tempo, Delay and Gate time Adjustments. This is an authentic reproduction of the original “System 100M” circuitry from the 80s that can fit in a standard Eurorack case. The best part? It’s at a very affordable price. Mix the 182 in with your existing rig or start your modular synth journey from here. Either way you’re sure to have a lot of fun!
    0 61
  • Behringer
    Triber Moderator
    0 65
    • Behringer
      BillJGuerrero I’m trying to get firmware OS X for my NX3000D where do I go all I see is for windows
      • June 24, 2020
      • The PK108 350-Watt Speaker Now Available
        PedroRodrigues Hi Bill Happy to help you, when you mean firmware you means the NX Series Edit PC V1.0 for the NX3000D or you need the firmware on a service perspective?
        • June 24, 2020
  • OttovanZanten
    Contributor - Level 1

    My Neutron is behaving quite strangely. When I plug something in to the Att2 Out it changes the sound quite a bit. It's like it's changing the Pulse Width. If I then connect the same or a different patchcable to the Att1 In it changes even more. It's like it turns down the PW2 from 2 o clock to 8 o clock.

    I can turn it by hand, but it seems like unintentional behavior and sometimes it changes my sound quite drastically and when you have a complicated patch it can be quite tricky to find out why your synth is suddenly making almost no sound even though you just routed something to the Attenuators that are turned all the way down. You would expect to change at all untill you start turning the Attenuators.

    I added a video to demonstrate what's happening/ I would really appreciate it if somebody that owns a Neutron can try doing what I did here and let me know if this is how they all are of mine is somehow malfunctioning.

    I just updated from Firmware 1.0 to 2.02 and it didn't change anything by the way.

    0 380
    • OttovanZanten

      Yes, that's normal for Neutron.

      ATT2 Out is Normalled to both ATT1 In and Pulse Width in.

      When you insert a cable, ATT2 is no longer connnected to ATT1 In and Pulse Width, but ATT1 In and Pulse Width In (both oscillators) are still connected together.

      Technically (and this point can be safely ignored) the output from ATT2 was providing an effective ground and preventing ATT1 In and Pulse Width from interacting.

      Anyway, connecting inputs together produces "unpredictable results", as you discovered.
      Also the pots for pulse width are providing what Behringer claim is a "useful" DC offset to the input of ATT1

      Behringer advised me not to use ATT2 Out when needing reliable pulse width! They didn't supply a workaround.

      The normalling of ATT2 OUT to ATT 1In is of course not only a cause of issues, it's also somewaht useless. You need to patch the connection anyway in order to cancel the normalisation to Pulse Width.

      Your workaround is to patch some 0V voltage from the patchbay to the PW in socket. SLEW Out does the trick





      • November 16, 2019
  • Naszto
    Contributor - Level 2

    This pedal just rocks! But nothing is perfect. It has in two disadvantages for some:

    - huge
    - no battery compartment

    The input stage has a noise gate, where you can set the threshold but not the decay. Not perfect but comes in quite handy.

    You have two knobs for gain and master. The master volume works in a very clean way. The gain knob gives you the gain of a tube stage. From a tiny bit of crunch, a little more saturation to full distortion is there everything.

    The tone control consists of three knobs. Some folks hear some mid scooping, but I don't. You can easily take treble and bass down, if you want even more mids.

    The build quality is very decent. It has a sturdy metal case and the potis feel smooth.

    Best of all the flexibility of the sound. You can use them as booster to drive a tube amp into saturation or dial the tone of it's own real tubestage. And everything in between.

    And you can change the tube. I fine with mine, but you can find on youtube folks changing the tubes, getting something really impressive:

    0 258
Go to page