Hello Guy's,

Maybe its already discusted but i can't find it.

i have the same problem with my 4x UCA222 on one win 10 pc (other pc's it works)

it install the drive automaticly but as a USB device.

so i can't find it in the device manager as a audio device.

I installed manualy behringer USB Audio 2.8.40 (now it works perfect)

only i hear ever 3 maybe 5 minutes a beeping tone ( if its a trail version).

anybody that have the same problem or have a diverend driver to use?

pleas let me know.

the drive i used its attached in the message

 i Make a ticket: CAS-590664-B0W7Z0 and no email...

I need Tracktion access for star to use U Phoria UM2

I bought Behringer uphoria UM2 few months ago.

It comes with Tracktion software.I didn.t get the activation code to download the software.please help me by providing that.

Hi

I have a question regarding the interface and the midi ports it occupies (on windows 10).

I have downloaded a midi utility tool from Korg and shows the the UMC-1820 occupies 4 midi ports - why is that and will it be ok to delete them via this tool from Korg?

The reason i am looking into this is because Windows can only handle 10 midi devices and some might not work if i don't clean up the list of midi devices.

The USB devices list (attached pdf) shows 3 instances of the Behringer as well - can i remove the 2 instances that is not connected, without ruining my DAW setup?

Hope somebody can help with this as there are many people looking into this windows issue.

Kind regards

  Dreams

I just bought the podcast bundle with the c-1, HMP1000 headphones and the UM2 interface. i need to urgently record voice over work and the hissing sound in the background is too loud. When I increase input gain it gets even louder, when i decrease it the mic does not detect my voice at all.

I am using Audacity with settings on MME + recording via the C1 only and only listening through the headphones.

Please assist me to clear this annoying noise? Is it even possible or is the product just not that great?

The Tribe came through for me last time, so I'm back again with a lot more knowledge, but still getting stumped by this one! We are testing some gear for a new studio and have the X32 LIVE SD recording card on loan. We installed the card into our X32 to try for some live shows, but we are separately working on a big recording project using Logic Pro X--so I of course have scenes for both so I could toggle between the functions. I thought this would work, but I'm at a loss.

When I loaded my REC scene to playback a new song for mixing, I get absolutely nothing for audio output. I can see the signal in Logic, and can't find any configuration on the X32 that sends this signal to my monitor controller. I didn't change any routing on the X32 from the way it previously worked. Our speaker/amp configuration is the same. I don't know 100% if it's a problem with routing or with the X32 LIVE card, or maybe I wrongly believed it would still interface the same as the X-USB card did? I'm uploading the scene we used previously that WORKED with the X-USB card--all I had to do was load the scene and turn up the knobs.

For reference, I'd been tracking 16 ch into Logic Pro X from the X32, then assigning certain instruments/groups in Logic back through the X32 for use with PowerPlay pods for multi-person recording, which is why the P16s are in use in the Card Output assignments. I thought I was starting to really get a grasp of routing this machine, but I can't even get this to output to my studio monitor controller for mixing. VERY frustrating and humbling.

Thanks in advance for any advice and assistance on this one! It's late here, so I'm giving up for the night. I'll check back tomorrow and hopefully one of you amazing folks can step up and help me out with this monster!