207,584 members
79,671 posts
  • ChaseMcKnight
    Triber Contributor
    Dear all,

    We're pleased to announce that M32-Mix V 2.3.1 is now available for download.

    M32-Mix for MIDAS M32 Digital Mixing Console

    M32-MIX remote control and offline editing software provides comprehensive control over all mixing and routing functions of your MIDAS M32 consoles right from the convenience of your iPad®.

    From on-stage monitoring sound checks, preamp and channel processing control, to editing the console's onboard effects racks, the M32-MIX app allows the operator to control the M32 with unlimited flexibility and ease of use.

    M32-MIX gives you the freedom to move about the venue, in order to achieve the maximum performance of your system. Just connect the iPad to your wireless network and assign a static IP address to all consoles wired to that network. The M32-MIX app will connect to that IP address showing the type of console while connecting. No additional hardware, no computer and all extremely easy. M32-MIX unleashes an abundance of remote functionality for the MIDAS M32 series of digital mixing consoles.

    * Control over Input Levels, incl. Preamp Gain, Low Cut, Phase, Phantom Power
    * Configure the LCD Scribble Strips, incl. colors, icons and names
    * EQ-curve control for fine-tuning the equalisation from anywhere in the room
    * Real Time Analyser when editing EQ
    * Metering overviews with all levels at a glance
    * Individual input channel Sends to all buses
    * Sends on Faders feature for rapid stage monitoring setup from your iPad
    * Detailed editing of channel preamp, gate, dynamics, equaliser, bus sends and LCD scribble strips
    * Complete editing of M32 onboard effects rack
    * Scene management and control functions
    * Routing to Behringer ULTRANET P16 personal monitoring system
    * 6 aux, 2 USB recorder and 8 effects returns levels
    * 16 aux bus, 6 Matrix, Master LCR and 8 DCA levels
    * Mute lock-out feature prevents accidental muting
    * Connect multiple iPads® simultaneously

    * Compatible with any iPad running iOS 6.0 or higher
    * Requires a wireless router connected to the M32
    * M32-Mix 2.3.1 requires M32 console firmware V2.14 or higher to be installed on the console

    What's New in Version 2.3.1

    - Fixes for mute issues
    1 5,928
  • ChaseMcKnight
    Triber Contributor
    Dear all,

    We're pleased to announce the release of our latest M32 firmware, V 2.16.

    M32 Firmware Update Version 2.16

    The M32 Firmware Update V 2.16 features performance enhancements to the MIDAS M32 operating system. The Version 2.16 firmware improves the main display UI refresh and fixes some small glitches.

    MIDAS is constantly adding new features and making enhancements to this extremely stable operating system, so that you always experience the best possible performance from your M32. Visit and check for updates regularly.

    Note: It is recommended that you backup all data (export Show and Libraries to USB) before updating, as a firmware upgrade may erase data currently stored on your M32. Please be aware that firmware 2.16 should be used with M32-Edit 2.5 on PC / Mac / Linux computers in wired networks, and with M32-Mix 2.2 or higher on Apple iPads (min. iOS 7) for wireless networking.


    - GUI drawing routines significantly accelerated

    - Fixed DIN midi remote control problem

    - Channel group assignments synced when fader link option is reselected

    - EQ gain center led only lights up when gain is exactly 0 dB

    - Indication of hard mute state, shown on meter pages with a dark red fader knob

    - EQ band reset bug fixed

    - Ducker attack and release times fixed (were swapped since 2.10)

    - Routing page tab “p16 out ” renamed to “ultranet ”
    1 7,457
  • ChaseMcKnight
    Triber Contributor
    Dear all,

    We're pleased to announce our latest Offline Editor G3.2.6 for PRO1, PRO2, and PRO X.

    Version G3.2.6 - Offline Editor

    Full Public Release for Offline Editor

    This document constitutes a formal release of Offline Editor software for full public usage. This build can be made fully available to the public.

    Addressed Issues:
    - Fixed GUI navigation issues on 13" Retina MacBook Pro
    - USB detection now works on El Capitan
    - Fixed Issues where text and file lists can display incorrectly when window resized

    Additional Information

    How to install the offline editor on OSX
    1. Copy the file below to an Apple Macintosh computer, double-click the file.
    2. Accept the license agreement then drag the Midas Offline Editor icon onto the “Drop here to install” icon.
    3. The program is then automatically installed and can be clicked to start it.

    Minimum Specifications (for application only)
    Apple Mac with OSX 10.7 (Lion) or above
    4GB RAM
    500MB HDD available

    Operational Considerations

    Please ensure you Mac settings are configured to allow third party applications to be installed

    How to install the offline editor on OSX:
    - Download the dmg file from the website to your Mac
    - Double click on the icon
    - Follow the on screen instructions
    1 6,280
  • ChaseMcKnight
    Triber Contributor
    Dear all,

    We will have scheduled IT system maintenance happening in the Music Forum Community this coming weekend between 12th and 15th Feb, 2016.

    During this process the Music Community Forums and the Music Group Unified Website will become unavailable for about 5-10 hours. This work is slated to begin 13th Feb, 2016 around 9:00AM SGT. (which equates to Friday Feb 12th @ 8PM Eastern Time, or 5PM Pacific Time in the US) We apologize for any inconvenience this may cause and appreciate your cooperation.
    1 3,064
  • ChaseMcKnight
    Triber Contributor
    Dear all,

    We're very pleased to announce that a new firmware update (v1.7) for the DL32 Stage Box is now available as a free download on the Midas website.

    The firmware update 1.7 for DL32 adds performance improvements and new features to the I/O box operating system. This new version improves AES3 (AES/EBU) status bits, adds MIDI remote control of head amps and prevents clicks when using the Mute All Outputs function with very high subsequent gain.

    The firmware update can easily be done via USB using a Windows PC/laptop computer. Please follow the update instructions at the end of this document.

    This new DL32 Firmware version contains:

    New Features
    • Hold the MUTE button during power-on to disable the fan
    • Version 1.3 with increased fan voltage to support new fan model
    • Version 1.5 includes aes/ebu validity and status bits changed (fixing no-sound issue with Lab.gruppen iPD series)
    • Version 1.6 adds MIDI preamp remote control (as in DL16)
    • Version 1.7 Mute all function changed to digital mute, only

    MIDI Remote Control
    • Note: The DL32 will only accept MIDI controls when its preamps are not controlled from
    a console (i.e. M32 series) already
    • When DL32 is connected to any AES50 clock master that does not control its preamps, (e.g. Lynx AES16e-50), then its rear panel MIDI input allows controlling head amp gain and phantom power
    • Rx/Tx on MIDI CH01 CC80...95, 0-19 > Input 1-16, Gain, 2.5 dB steps, -2.5 dB...45 dB
    • Rx/Tx on MIDI CH01 CC96...111, 0/127 > Input 1-16, Phantom power, on/off
    • Rx/Tx on MIDI CH02 CC80...95, 0-19 > Input 17-32, Gain, 2.5 dB steps, -2.5 dB...45 dB
    • Rx/Tx on MIDI CH02 CC96...111, 0/127 > Input 17-32, Phantom power, on/off

    Windows (WinXP or higher) PC with USB connector and administrator account required for running the updater executable (DL32update_1-7.exe)

    Update Process:
    1. Download and unpack the updater zip file from on your Windows PC
    2. While the DL32 is switched off, connect its USB port to your PC using a standard USB cable (type A -- type B)
    3. Upon powering up, the DL32 will detect the USB connection and wait for the update
    4. Make sure you have started your Windows session with Administrator access, then start the DL32update_1-7.exe
    5. The terminal window will inform you about the update progress. Wait approximately 1 min until it shows completed
    6. Disconnect the USB link and switch the DL32 power off / on
    1 12,008
    • ChaseMcKnight



      Thanks for you post. I'm making this comment because I'm trying to update the firmware of my DL32 but the DL32 is not recognised by the PC. As soon as I boot the DL32 when connected to the computer the PC shows a message saying "USB device not recognised". I'm connecting the DL32 while is turned off and then I'm turning it on while connected. Because of this I haven't been able to run the updater and therefore my M32C which is up to date is not recognising the DL32. I've tried this with another PC and the same issue occurs. What could be the reason? 


      Thanks for your help in advanced. 

      • May 20, 2019
    • ChaseMcKnight


      j'ai le meme probleme pour la mise a jour de mon DL32.

      impossible de mettre la maj 1.7

      la fenetre de maj s'ouvre, lle telechargement commence et 10 secondes apres;, ca s'arrete et le message"peripherique non reconnu "apparait.


      une solution a t elle ete trouver?



      • September 12, 2019
    • ChaseMcKnight

      Hey Fred,

      No, in the end I wasn't able to update the firmware of my DL. My solution was to sent back the unit and get a new one from Midas.


      • October 1, 2019
  • KevinLechleiter
    Contributor - Level 2
    Is there a way to receive your announcements in my email.? I missed the M32 Webinar because I hadn't looked in the announcements thread in a while. Thanks
    1 3,348
    • KevinLechleiter
      Michael_Lapke Hi Kevin,

      Yes there is actually. When you go to the main section at the top of the "Announcements" forum you will notice (below the search bar but just above the top post on the right hand side) there is a clickable link called "Forum Tools". Click there and you will see an option for you to click "Subscribe to this forum..."

      From here you are able to receive daily or weekly email notifications about posts that go up in this section of the forum. This will also work with other sections of the forum as well. Hope this helps!

      We'll definitely be doing more live broadcasts in the future and will be sure to post here. Smiley Wink
      • January 28, 2016
  • ChaseMcKnight
    Triber Contributor
    Dear all,

    We're pleased to announce a new FW driver adding support for the VeniceF range on Mac OSX 10.11 El Capitan.

    Venice F Mac OS X Firewire Driver - Public Release
    Version G4.2.0 (07 January 2016)

    New Features -
    This release supports Mac OS X 10.11 ‘El Capitan'

    Fixed Issues -
    Compatibility release only

    How to Upgrade Your Mac
    • Download the MidasFW.dmg file to your Mac
    • Double click on the icon
    • In the pop-up finder window, double click on MidasFW-
    • Follow the onscreen instructions for the Dice Mac OS X Driver release

    Please Note After upgrading the OS on you Mac (e.g. from Yosemite to El Capitan) it may be necessary to reinstall this driver.
    1 5,040
  • ChaseMcKnight
    Triber Contributor
    Dear All,

    We are excited to announce that we have a Live Broadcast happening next week from our Music Studios location in Los Angeles. This session will consist of a short presentation followed by a live question / answer session where you will have the opportunity to see your questions answered in real-time by our product specialists. The details for next week's session is below, all you need to do is click the link at the start time. Note that you will need to be signed into a YouTube / Google account in order to participate in the Chat. Hope you can make it!*

    Date / Time: Thursday 1/14 4PM PST
    Topic: M32 Digital Console
    Description: In this Live Broadcast, we present the M32 Digital Console. We will cover the basic feature set of each model before opening the floor for a live question and answer session with our product specialists.

    1 2,805
  • Michael_Lapke
    Triber Moderator
    Dear All,

    We are excited to announce that we have some Live Broadcasts happening this week from our Music Studios location in Los Angeles. These sessions will consist of a short presentation followed by a live question / answer session where you will have the opportunity to see your questions answered in real-time by our product specialists. The topic schedule for next week is below, all you need to do is click the link at the start time. *Note that you will need to be signed into a YouTube / Google account in order to participate in the Chat.*

    Date / Time:*Monday 1/11 4PM PST
    Topic:*X32 - Remote Control Setup
    Description:*In this live broadcast, we will show you how to setup your X32 Digital Console for wireless remote control via your iPad or PC/Mac/Linux computer. We will also discuss the available remote apps and WiFi “best practices”. There will be a live question / answer period with our product specialists following the presentation.*

    Date / Time:*Tuesday 1/12 4PM PST
    Topic:*X AIR Series Overview
    Description:*In this Live Broadcast, we present the X AIR series of Digital Mixers. We will cover the basic feature sets and differences between the models before opening the floor for a live question and answer session with our product specialists.*

    Date / Time:*Wednesday 1/13 4PM PST
    Topic:*X-TOUCH Overview (Featuring Logic Pro X)*
    Description:*In this Live Broadcast, we present the X-TOUCH Universal DAW Controller. We will cover the basic feature set and operation in the Logic Pro X DAW before opening the floor for a live question and answer session with our product specialists.*

    We hope to see you there!
    1 2,420
  • Roblof
    Volunteer Moderator
    Dear forum members,

    Our forum may experience a brief service interruption this coming weekend as we will be performing a scheduled maintenance.

    Users in our MUS!C Group Community Forum please take note as there will be a downtime during this process.

    The interruption is scheduled to be this Saturday, 9 January, 2016 around 4pm - 6pm Greenwich Mean Time (GMT).

    Our Network Team team told us that the actual maintenance would only take 15-20 minutes. But to give ample time for testing before and after they have provided us with a 2 hour downtime window.

    We apologize for the inconvenience.

    /--The Mod Squad
    1 2,443
Go to page