Hello everyone..

Im in desperate need of help.. i have the ditto mike looper which has a fault.

The pedal itself works fine if the switches on the box itself are used by foot/ hand... when i use my mp75 mic it will not operate the looper at all.  It is ( not )  the mic or the lead as i have plugged them into my friends identical ditto looper and they work fine..  i have also done the sequences of pressing the switches when powering up or in the other reverse way but still nothing..

If anyone can help i will be very  grearfull.

Thanks ..

I've recently started using a Beat Buddy midi sync with my VLX3 on stage.  I've followed what instructions I've been able to find relating to midi sync and looping in Quantized.  75% of the time it's pretty seemless and works very well.  I utiize a switch 6 pedal on stage and have the first three buttons mapped to LRecPlay, LStopErase, and Erase all; buttons 4-6 are guitar related.  

When the looping function seems to have a hiccup; I've noticed the display screen flashes Q Rec A; then REC A.  This causes an issue with the timing of the loop.  I can't find anywhere what Q Rec A means.  It seems to put a short pause in the beginning of the loop, which throws the timing of the loop completely off.  Any help is much appreciated.  

Jon

Greetings all,

Can anyone please help me with making My DL16 work with my M32?

When I connect the DL16 to the M32, I am having a terrible time with routing. When I select the AES50 1-8, and 9-16 as inputs with 1-8 selected on the DL16 I get no signal to the M32.

What I want is all 16 inputs on the DL16 connected to the M32.

I want the out 7, 8 of the DL16 for Main L-R house and 1-6 as monitor sends. I can't for the life of me figure this out. I have loaded saved scenes and tried every way I know how to send signals back and forth with no luck. When I do get the output to 7,8 working the inputs don't. PLEASE HELP, Andy

Hi all!

I need some help. I work for an elementary school that is just starting their theater program. We currently have about a 8-10 Wireless mics that when the receivers are plugged into our Behringer mixer they use almost every input.

we were thinking of purchasing a line mixer that could have the receivers plugged into it, and then the output of that mixer plugged into our Barringer Xenix 2442. that should free up a whole mess of inputs for use with other things right? Or is there a better way of doing this?

Any help would be greatly greatly appreciated! Thank you so much!

Hello All,

We used our XR18 last night to play a backyard party. We built a simple drum stand using a couple of wooden pallets and some plywood. We also set the XR18 in it's molded plastic travel case on the same stand. We started playing and had audio issues. We stopped to troubleshoot and determined that the vibration coming through the mixer was affecting the sound with glitches. We moved the XR18 off the bouncy stand and onto the ground and no more problems. I thought the XR18 was all solid state and wouldn't be affected by vibrations, I'm just curious why we had this problem. 

Thanks for any insight