Statistics

289,830 members
172,391 posts
  • New
    RobertKelly
    Contributor - Level 1
    2021-07-30

    Hi - Can you suggest a simple solution if I want to use a DP48 for a personal monitor rig when i can mix my keyboards, 3 vocalists and a few other mics? I am now using a P16M with an XR18 which works well but I would like the recording capabilities, the dual mix output and the reverb that the DP48 provides. 

     

    Thanks!

    Rob

    read more...
    0 48
    • RobertKelly
      RexBeckett Hi Robert, the DP48 requires an AES50 feed (48 bi-directional channels) but the XR18 only has an Ultranet (16 channel) output which is not compatible. There is no simple way to convert Ultranet to AES50.

      I suggest that you replace the XR18 with an X32 Rack which supports both AES50 and Ultranet.
      • July 31, 2021
  • New
    RobertSmoughton
    Newcomer - Level 1
    2021-07-29

    Hello. 

    Just recently acquired the Perform VK to create harmonies live from a vocal. 

    However, ideally I'd like to use this as a send from our mixer so that it can be fed with different singer's vocals depending on the song. I want to keep the dry signal separate and only have the Perform VK output the harmonised result. 

    Is there a Harmony mix level setting? Can this be controlled via a Midi CC? Is there a dry signal level that I can mute or set at zero? Also can this be controlled by midi CC?

    Cheers

     

     

    read more...
    0 49
    • RobertSmoughton
      RobbyWingfield Hi Robert, this is Robby from Music Tribe. Unfortunately, the Perform VK does not have the ability to reduce the Dry output to zero or to engage a "kill dry" setting.
      • July 30, 2021
    • RobertSmoughton
      Aectaein

      Yes you can do it, just turn Harmony to max level.

      • Jan 13
  • New
    richiejamesdj
    Newcomer - Level 1
    2021-07-27

    Hi there, I have recently purchased a perform VK and had two questions that dont seem to be answered from the manual.

    1. I am a little confused as to whether I need to connect my keyboard (Yamaha SX700) to the instrument inputs of the VK as well as the midi cable? Or is just one of those methods required and which is recommended?

    The concern I have with conmecting the keyboard to the Insturment inputs then out to my mixer/PA it means I have both mic and keyboard mixes going into one channel losing some flexibility in controlling mic volume during performance.

    2. I have really never used midi so wondering if I just use a midi cable to connect my keyboard to my VK, should it just work in terms of recognising chords played on the keyboard and creating appropriate harmonies or will I likely need tp adjust some midi settings on the keyboard first to make this work?

    Many thanks in advance for any answers.

    Regards, Richard

    read more...
    0 60
    • richiejamesdj
      RobbyWingfield HI Richie, Robby with Music Tribe here. You can send MIDI from your keyboard and as long as it is transmitting on the same MIDI channel as the VK you will be all set. Most devices will default to MIDI CH 1 this is the default of the VK as well. This video will show MIDI controlled harmonies. I've marked it right where she begins showing the effect in practice. I would suggest taking some time and watching the whole playlist that this video is from. It's really helpful!

      https://youtu.be/bBQL0z8EiQU?t=308
      • July 30, 2021
  • New
    MaxResonant
    Newcomer - Level 1
    2021-07-19

    What's the USB Port for - the manual says "when connected to computer it shopws up as a class-compliant USB MIDI Device capable of supporting MIDI in & out." - is there a save function for the patches I create other than the patch notes at the end of the manual??

    read more...
    0 44
    • MaxResonant
      DavidKnighton Hello MaxResonant,
      I'm not sure what product you're speaking of, but if it's a Behringer synth, the USB port will serve a few purposes. Firstly, some synths will have software upgrades available, as well as some real time software enabled settings. These can all be appropriated using the USB connection. Secondly, the USB MIDI can be used to trigger the synth from software, such as Ableton, Logic, Pro Tools, Etc. You could essentially record MIDI tracks and have it play the notes through the synth, much to the effect of a sequencer. This is very useful if you're a solo artist and you want to utilize multiple synths at once. Saving presets is unfortunately not supported, as the majority of controls for these synths are all analog potentiometers and not digital rotary encoders.
      • July 27, 2021
  • New
    Tmallett
    Newcomer - Level 1
    2021-07-09

    I have keys playing at different volumes and sensitivities so I think I need new contact strips. I've tried cleaning already which helped but new keys keep failing. Does anyone know if they are available or if another brand is compatable?

    0 55
    • Tmallett
      KyleJohnson Hello, Kyle here with Music Tribe. For spare parts related inquiries please contact our Parts team. To do this please click on Support at the top of the page and then Spare Parts to fill out a ticket.
      • July 11, 2021
  • New
    hiddenagenda
    Contributor - Level 3
    2021-07-09

    tried the midi ins and outs, and the trs cable in clocks, but just can't get them to synch.  Im new at MIDI and know it's something I'm doing wrong but can't get anywhere.  Knowledgeable Behringer users help!  What am I doing wrong?

    Thanks for any help you may provide.

     

    read more...
    0 53
    • hiddenagenda
      DavidKnighton Hello hiddenagenda,
      You may need to open the Synth Tribe tool on a computer and interface with the devices to check the sync settings if applicable.
      • July 12, 2021
    • hiddenagenda
      hiddenagenda disregard-found info elsewhere
      • July 14, 2021
  • New
    AndrewBarrett
    Newcomer - Level 1
    2021-07-06

    Hi all,

     

    I've recently come into possession of a Behringer CDP1000 electric piano keyboard. Everything works as it should EXCEPT that it did not come with the cable from the pedals to the main unit. Would anyone know how/where to get one? Thanks!

    read more...
    0 82
    • AndrewBarrett
      Nigel67 Hi Andrew. This is quite an old product. I am unsure if we would still have the cable, but the best people to ask would be the Spares Team. To contact them, click on the support tab at the top of the page. A new window will open. Scroll down and click on the Spares tab and submit a ticket. A colleague will then get back to you with availability and pricing. If they do not have stock, then they may be able to tell you the type of cable you need and you could get one made up.
      • July 6, 2021
  • New
    voicesupport
    Newcomer - Level 1
    2021-06-30

    Salut a tous, j'ai perdu des presets de mon voicelive 3 que j'ai voulu mettre le firmware a jour. Est-ce que quelqu'un aurait une solution a recuperer les presets qui ont ete supprimes du voicelive 3? 

    Merci d'avance

    0 54
  • New
    jjluke
    Newcomer - Level 1
    2021-06-24

    I have a UMC204HD interface.

    Downloaded the v.5 driver onto Windows 10 Pro PC.

    Connected USB cable to computer and interface. 

    Interface does not power on and UMC control panel says "No devices connected."

    Please help

    read more...
    0 60
    • jjluke
      KyleJohnson Hello, Kyle here with Music Tribe. Please contact our Service team by clicking on Support and then Service to submit a ticket.
      • June 26, 2021
  • New
    Flintstone007
    Newcomer - Level 1
    2021-06-04

    Hello,

     

    the sound of my neutron seems to have disappeared. It gets a midi signal and I can hear the sound on on output of the headphone it´s just the output channel that seems to be dead. Can anybody please help me? Thanks a lot in advance.

    read more...
    0 68
    • Flintstone007
      DavidKnighton Hello Flintstone007,
      When in doubt, I tell people to turn every knob to 12 o' Clock and leave all the patches open. You should get a fast pulsing laser type effect if you slow down the LFO rate. Check all your outputs using this method. You may also want to check the default routing and signal flow on the Neutron manual. This can help you sort out if you have a broken internal patch. I've seen it happen before. If you can sort out a broken internal patch, then you'll want to manually patch it using a cable to restore proper signal flow.
      • June 9, 2021
Go to page