Statistics

293,645 members
176,671 posts
  • New
    Daniel15
    Newcomer - Level 1
    2022-08-04

    HELLO PEOPLE I HAVE M32 WITH DL151 1ND 153 STAGE BOXWXPLEASE HELP WITH THE SETTINGS.

    DO I NEED TO CLICK THE HA REMOTE TO USE THEM?AND WHAT SORT OF CONFIGURE DO YOU GUYS SUDGESTS.

    THANKS

    DANEL

    read more...
    0 2
    • Daniel15
      Nigel67 Hi Daniel15. You cannot connect these two units in series like the DL16 and DL32, so you would need to connect one unit to the AES50 A port on the M32 and the other to the AES50 B port. HA remote is only needed when you are using a dual system.
      • Mon at 1:37 AM
  • New
    Daniel15
    Newcomer - Level 1
    2022-08-03

       HI Group, Ihave m32 and dl 153 and dl 151 pls help setting them up?

    regarding Gain Instructure. HA Remote and Split Gain? 

     

    Thanks

    Daniel

    0 8
    • Daniel15
      Nigel67 Hi Daniel15. I have answered your question above in your other post. For a single system, there is no need to use HA Remote and Split Gain
      • Mon at 1:39 AM
  • New
    Yuasasan
    Newcomer - Level 1
    2022-08-02

    Hello,

     

    I m running W10 with latest updates, and PC-edit version 4.3

    -The firmware on my X32 Rack is 4.06 (latest downloaded from Berhinger site  30 july 2022.)

    My problem is, when I adress LR to DCA 1 (or even one of the other 7 dca's), and SOLO this DCA, my pc edit software crashes.

    Same goes for all the matrixes, linked or not..  (adressing linked matrixes or single ones to a DCA, doesn't matter)

    I have Hard Mutes turned off. 

    No additional remote hardware attached, only a SD8 connected.

    Even after an initialize, problem still occurs.

    Software crashes, and I have to clear Solo on the rack itself, because the software keeps crashing after re running the software.

     

    read more...
    0 5
    • Yuasasan
      NicJonesMT Hi Yuasasan
      Please click support at the top of the page and submit a technical support ticket.
      • Aug 2
    • Yuasasan
      Nigel67 Hi Yuasasan. I will report this to the software team. It is confirmed as a bug and will be fixed. Many thanks
      • Aug 3
  • New
    Ilmars
    Newcomer - Level 1
    2022-07-25
     

    Hi!

    Is there any possibility to get feedback destroyer (or similar) in X32 Rack FX. list?

    Thanks in advance!

    read more...
    0 7
  • New
    ARP101
    Newcomer - Level 1
    2022-07-14

    Greetings all,

    Can anyone please help me with making My DL16 work with my M32?

    When I connect the DL16 to the M32, I am having a terrible time with routing. When I select the AES50 1-8, and 9-16 as inputs with 1-8 selected on the DL16 I get no signal to the M32.

    What I want is all 16 inputs on the DL16 connected to the M32.

    I want the out 7, 8 of the DL16 for Main L-R house and 1-6 as monitor sends. I can't for the life of me figure this out. I have loaded saved scenes and tried every way I know how to send signals back and forth with no luck. When I do get the output to 7,8 working the inputs don't. PLEASE HELP, Andy

    read more...
    0 3
    • ARP101
      Nigel67 Hi ARP101. First of all you need to make sure that the M32 and DL16 are both running the latest firmware versions. Connect the AES50 A port on the DL16 to the AES50 A port on the M32. On an M32 as default, Main L and R are assigned to outputs 15 and 16. If you haven't changed any of the mix outputs routing, then do the following. On the DL16, in the vertical config bank of assign LEDs, make the bottom LED light only (OUT +8). If you press the Config button it will say 9-16. You have now assigned the 8 XLRs to outputs 9-16 of the M32 which 15 and 16 (or XLRs 7 and 8 on DL16) will be Main L and R. You now have to assign the outputs on the console to the DL16. So in the AES50-A Output 1-8 routing, you should assign Out 1-8, and for AES50-A Out 9-16, you should assign Out 9-16. You will now be able to hear the Main Outputs on XLR's 7 and 8. You will need to assign the Monitor Sends that you want out of XLRs 1-6 to Mix busses 9-14. For the input routing of the DL16 to the M32, go to the Input Routing and assign AES50 A 1-8 to Input 1-8 and AES50 A 9-16 to Input 1-8. You will now have all 16 x DL16 inputs on input channels 1-16. Check out this video. It may help you further https://www.youtube.com/watch?v=FBnuuPCnGTQ
      • Jul 16
  • New
    Vgsc97
    Newcomer - Level 1
    2022-07-12

    Hi all!

    I need some help. I work for an elementary school that is just starting their theater program. We currently have about a 8-10 Wireless mics that when the receivers are plugged into our Behringer mixer they use almost every input.

    we were thinking of purchasing a line mixer that could have the receivers plugged into it, and then the output of that mixer plugged into our Barringer Xenix 2442. that should free up a whole mess of inputs for use with other things right? Or is there a better way of doing this?

     

    Any help would be greatly greatly appreciated! Thank you so much!

    read more...
    0 2
  • New
    RobDurkin
    Contributor - Level 2
    2022-07-11

    Hello All,

    We used our XR18 last night to play a backyard party. We built a simple drum stand using a couple of wooden pallets and some plywood. We also set the XR18 in it's molded plastic travel case on the same stand. We started playing and had audio issues. We stopped to troubleshoot and determined that the vibration coming through the mixer was affecting the sound with glitches. We moved the XR18 off the bouncy stand and onto the ground and no more problems. I thought the XR18 was all solid state and wouldn't be affected by vibrations, I'm just curious why we had this problem. 

    Thanks for any insight

     

     

    read more...
    0 2
    • RobDurkin
      Nigel67 Hi RobDurkin. The XR18 has ribbon cables that connect the various pcbs together. It is possible that one of these ribbon cables is not seated properly and therefore bouncing in its mating connector. Although built to withstand being vibrated, every piece of equipment has a limit and I am sure a drum riser is a pretty harsh environment (depends on the music being played), so probably not the most ideal place to house the mixer.
      • Jul 10
  • New
    Armandovh
    Contributor - Level 1
    2022-07-10

    I sent a device to warranty after almost 2 years, it arrived and it started with the same problem.

    PPA2000BT 

    I sent the equipment to Las Vegas, I paid for the shipment and apparently they did not repair it well. And I send a message to the email and nobody answers me.

    read more...
    0 9
    • Armandovh
      Nigel67 Hi Armandovh. I am very sorry to hear of the repair issues you are experiencing with your unit. Let me check your case and come back to you shortly.
      • Jul 10
      • MUSIC Tribe Care] Behringer - RMA: 376933  - CAS-157554-W9Y7D6 - CRM:0133700000982
        Nigel67 I have found the case and seen your replies. Unfortunately the person that the case was assigned to is no longer with the Company. I have raised this this the Service Team, and have asked them to take a look at your case as soon as possible. I am very sorry for the inconvenience.
        • Jul 11
  • New
    lhill1palm
    Newcomer - Level 1
    2022-07-06

    How do you find out status of a repair for my behringer x18?

    0 10
    • lhill1palm
      KyleJohnson Hello, Kyle here with Music Tribe. If you can provide your case number or RMA number I can look into it for you.
      • Jul 6
      • Repair  Status Behringer X18
        lhill1palm The RMA number is 382727 and the case number is CAS-602402-H5W3C7  -  X18
        • Jul 7
    • lhill1palm
      lhill1palm The case number is CAS-602402-H5W3C7  -  X18  -
      • Jul 7
  • New
    Stephenph
    Newcomer - Level 1
    2022-07-05

    Hi all

    i have acquired a couple of subwoofer amp modules that have 4 user selectable settings via a push button selector on the amp panel. A bit of investigation on the Net seems to point the amp modules coming from a TFA-600BDP self powered bass unit- but I cannot find what the 4 settings actually are! - nothing in the manuals !  Help please!

    cheers Stephen.

    read more...
    0 2
Go to page