Hi, 

I managed to grab a DN3600. I added it to my guitar rig. It does a worderfull job :)

However I cannot manage to add it to my midi setup. I use a Roland midi as HUB and use a 5pin to 3pin cable to connect the EQ to the HUB.

The manual is not clear if it respond to regular midi message as a standalone device or if it require a specific setup (as of the master/slave section). I tried the omnichannel and different channel setups... it doesn't respond to any messages.

Anyone have any idea ? 

Thanks

My DN9650 with USB card was working fine with my Mac and Pro1 until I moved it. It is kept in a rack with 2 DL153 stageboxes. Once it was hooked up in the new location, it does not recognize AES50 connection. After checking and swapping cables around I determined that the cable is not my problem.

The led just flickers on the back of the unit and the Pro1 does not recognize it as connected.

I am hoping for someone to give me some pointers for troubleshooting this issue. 
The DN 9650 has never toured. In fact it has only been moved one time. It is very pampered

Hello,

Reading the product manual for the KT-2A leveling amplifier, found this written:

"The controls on the 2A-KT consist of a Pre-Emphasis trimmer which adjusts the compressor / sidechain interaction. When set fully clockwise, the sidechain responds to the full frequency bandwidth of the incoming audio. As the trimmer is turned counterclockwise, the compressor responds less to the signal's high frequency transients."

Shoudnt be the opposite for counterclockwise rotation? Meaning the compressor reacts more to high frequency acting like sort of a de-esser?

Why to react more on the lows and ignore highs?

I ask this because this is the functionality I know the older LA2A units have...

Many thanks for reply and clarification.

BR,
Cristian

Hello Team,

This is Husnain from Pakistan and i have 100 audio processors Model: DMA-8500 each piece is for each classroom of different universities. Can anyone please help to suggest how can i use all input channels as i have 8 mics in each classroom. 

Senerio is like i have 2 speakers which are connected with amplifier 2 seperate channel. Microphones connected with Digital Audio Processor work with first 2 channels but other channels are not working as it has to be configured. I would appreciate if anyone can share configuration mannual so all 100 devices can be configured accordingly. Thanks

regards,

Husnain 

Email: [email protected]

Hello,

As mentioned in the subject line, I'm trying to connect the brackets that came with my Klark Teknik DW20BR, so it can be mounted.  Though, the screws provided are too long after removing the black rubber feet that are originally mounted.  And, it doesn’t come with any shorter screws. Trying to figure out what I’m missing here? Thinking maybe I’m missing a step.

Tony

702-523-0126