Hello. first post here from the USA thanks in advance for any help.

Just got this used 360 and thou it passes audio with no issue both A & B EQ has no effect on said signal.

On a side note, I'd like to know what these 2 holes on the back marked "In put TX and Out put TX" are for. Is that a switch inside the unit (I see something white in there but not sure what it is)? Is that why I'm not getting anything more than by-passed signal?

Seiral #36514

Hopfully some one will know what the trouble is and leave a reply, I don't like flipping switch's on (or off) with out knowing what they do.

Hi everyone,

I recently purchased the 76-kt compressor and im absolutely loving it. I am aware of the rear vu meter adjustment pot as stated in the start up guide but there is also a small hidden screw directly underneath the vu meter that i have messed around with (which i regret doing) i dont know why i messed with it, i was just curious what it did. 

Im worried ive somehow messed up the calibration now as i presume this screw is factory set and shouldnt be altered. I can see that you can turn it clockwise and anticlockwise one turn and then it becomes stiff, you then screw further past that stiffness and it sort of resets to the loose, clockwise/anticlockwise setting as before.

Am i ruining the screw by turning it over and over to see what it does? is it some sort of spring that i am unwinding?

Id really appreciate any technical information to settle my mind on how this screw works and what you should do with, if i have perhaps ruined it by over turning it, or if i am just worrying too much?

Thanks ever so much in advance.

Hello,

When I connect this unit to my PC via the USB cable I only get the Left side of stereo.

I have tried ALL Pan positions / Input choices and thpough the level meter shows both stereo lines are OK and the Phones and other outputs give me full stereo I get nothing on the right side of the USB output.

I tried all the same cables but using a UMC202HD and had no issues at all.

Might my QX1002USB be faulty of r is there a settinmg I need to address?

Thanks,

Mike

Hello, can i use an Midas DL32 with a Midas Pro2 in combination with DN9650 and a CM1 AES50 Card?

What is happening when i upsample the DL32 to 96 kHz? Do i get two AES50 streams with 16 or 24 channels or one stream with channel 1-24 and a second with 25-32? Or do i get one 24 channel AES50 Stream an lose channel 25-32? Can i still contoll gains over the converted AES50 stream?

And an other question. Can i control the settings of the DN9650 via Macbook?

And can i update and control Pro Boxes like DL231 with a Macbook? 

Nomaly i dont want to get a windows device just to contoll these settings.

cheers

Hi Support Team, can I use the DN32-USB card for my Midas M32C like a Midi-interface to controll my Keyboards and Synth from my DAW? Or is this feature implemented in the DN32-LIVE card? (or possible with both cards?) Do you have a Midi implementation Guide for these cards? Thanks and best regards, Martin

Hi KT team, I've followed a previous post from before Xmas and contacted suppliers re availability of a pair of 2As in a bundle I need.

Thomann replied with "sold out and not expecting any more". Please can you advise if 2A has been discontinued, I'm ready to order a pair of 2As, a pair of 76s and a dimension.

richy