Statistics

299,780 members
183,557 posts
  • New
    angleton1stumc
    Newcomer - Level 1
    2021-01-21

    I'm running a midas m32 with version 3.08. can I update directly to firmware version 4.xxx

    0 79
    • angleton1stumc
      Paul_Vannatto Yes you can. But backup your scenes, snippets and presets first. Also make note of all of the settings on the first 4 screens of the Setup section.
      • January 20, 2021
    • angleton1stumc
      angleton1stumc Thanks for the information. I always have a backup for my scenes, snippets and presets so that is not an issue but when you say make note of the settings on the first for screens of the setup section do you mean that the upload of firmware will change those or is this a precaution only.
      • January 21, 2021
    • angleton1stumc
      Paul_Vannatto Yes the update to firmware 4.x will reset everything to factory default. Going forward, firmware 4.x has a new feature of backing up the complete console, including those Setup settings.
      • January 21, 2021
  • New
    GeorgeAukerman
    Contributor - Level 2
    2021-01-20

    Hi, I am looking for information on loading and using Waves auto tune plug ins on a Pro 2 console. Thx!

    0 149
  • New
    guitarsit
    Newcomer - Level 1
    2021-01-18

    Hi all, I am having a hard time finding an answer to the following so posting here to see if anyone can help. Thanks in advance.

    I have an MR18 I'm controlling from my Windows laptop. They're connected via ethernet for the MR18 controller, and USB for recording to DAW. Mixing and recording work fine. We're using 9 channels all with analog inputs and I'm using Acid Music Studio for my DAW.

    I also have 1 input where the source is set to USB, to play audio from the laptop back into the mix. This works fine for the live mix, but it's not being picked up by the DAW for recording. In the DAW I set the input for the track to be the channel I've got the USB running through -- just like how the other DAW tracks are set up -- but it doesn't detect the audio.

    All suggestions welcome.

    read more...
    0 46
    • guitarsit
      RexBeckett Hi guitarsit, you need to change the signal tap for the channel with the USB source. This is on the In/Out -> USB Sends tab. The default tap is Analog which is directly from the analogue input A/D converter. If you change the signal tap to Input it will take the feed from after the analogue/USB switch and therefore record the USB playback. Make sure that you don't enable record monitoring to the same USB track in the DAW software or you will get digital feedback.
      • January 18, 2021
      • Recording channel where source is USB
        guitarsit That did the trick. Thank you!
        • 1
        • ·
        • January 18, 2021
  • New
    PSdrums
    Newcomer - Level 2
    2021-01-15

    Hello guys, I am having trouble with my M32 working with Studio One. I am getting signal out of the DAW in this example a loop.

    But it seems I am getting no signal in the Daw and the faders aren`t moving when I slide the m32 faders.

    Who can help me with a proper connection. Or isn`t Studio One not the most suitable DAW for the MidasThanks in advance!

    BR Peter Steur

    read more...
    0 63
    • PSdrums
      Paul_Vannatto What do you have assigned on the Routing, Card out screen?

      For full M32 integration, I would suggest using Reaper with Patrick's X32Reaper app (found here https://sites.google.com/site/patrickmaillot/x32#h.p_DUz7OP4Wmg0- ) or his commercial X32Automate (found here https://x32ram.com/ )
      • January 15, 2021
    • PSdrums
      PSdrums Thank you for you reaction Paul. On my board card out screen i have 32 in 32 out assigned (not the usb 2 T).
      • January 16, 2021
      • M32 fully working with DAW Studio one
        Paul_Vannatto Wrong screen. What you describe is the Setup, card screen. I was asking what you have assigned on the Routing, Card out screen.
        • January 16, 2021
    • PSdrums
      PSdrums Comes reaper with full automation?
      • January 16, 2021
      • M32 fully working with DAW Studio one
        Paul_Vannatto Reaper and the X32 can be fully integrated using Patrick's apps
        • 1
        • ·
        • January 16, 2021
  • New
    sethmajor
    Newcomer - Level 1
    2021-01-15

    Hello everyone. I am trying to set up a Midas Venice U32 to a laptop to stream from through OBS.  When I plugin the USB from U32 to the computer I get a driver error message. I have attempted to locate the correct up to date driver bought cannot get the audio to the OBS system. 

    Thank you for any guidance.

    read more...
    0 438
    • sethmajor
      DavidKnighton Hello Seth,
      Are you getting any audio into your computer or no audio at all? Does your computer even recognize the U32 as an interface? Are you using Mac or Windows? If Mac, you need to update the firmware via Windows computer in order for the USB to discover on Mac. The update tool is here https://www.midasconsoles.com/midas/product?modelCode=P0AJK under the SOFTWARE tab.
      • January 15, 2021
      • Midas Venice U32 Driver
        sethmajor No Audio at all. It is recognized in my computer control panel but shows driver error. I am using Windows. I will try the update thank you!
        • January 15, 2021
      • Midas Venice U32 Driver
        sethmajor When I click on the link it opens to VU24, is it the same driver for the VU32, which is what I have?
        • January 15, 2021
      • Midas Venice U32 Driver
        DavidKnighton They are the same drivers for either console frame.
        • January 15, 2021
      • Midas Venice U32 Driver
        sethmajor I tried the link that you provided but it says I do not have the correct windows operation, is there a driver of windows 10? Or another option to get sound from the mixer to my computer besides the USB?
        • January 16, 2021
  • New
    reggie1024
    Newcomer - Level 1
    2021-01-11

    Hey Everyone.  I've been on this site trying to get in touch with a representative for midas for warranty purposes and the page it directs me to never seems to be working. Has anyone else had this problem? Are there any other solutions?

     

    read more...
    0 122
    • reggie1024
      KyleJohnson Hi Reggie, Kyle here with Music Tribe. In order to contact our Service team, please click on Support at the top of the page then scroll down and select Service Request. Fill out the form and submit.
      • January 11, 2021
  • New
    Howgreen
    Newcomer - Level 1
    2021-01-09

    Question,

    I am having issue finding a DN32 Dante Card in the US.  

    My question what is the difference between an X32 Dante card, and a Klark Teknik DN32 Dante card?  

     

    Is the X32 Dante card compatibile and does it operate the same as a DN32 Dante card on a Midas M32 Live Console?  

    read more...
    1 804
    • Howgreen
      GaryHiggins I’m 99.9% sure they are compatible. Essentially no difference.
      • January 9, 2021
      • X32 Dante I/O Compatibility with M32 Live
        Howgreen Gary thanks for the information. Are there any users that have installed this card instead of the DN32 Dante that can confirm?
        • January 9, 2021
      • X32 Dante I/O Compatibility with M32 Live
        GaryHiggins The KT site says theirs works in either Behringer or Midas, same Dante chip, Brooklyn II. The reverse would also be true. X-Dante will work in an M32. Mine is in my Core and has been for a year or so. I might try to put it in my M32 for the heck of it.
        • January 9, 2021
      • X32 Dante I/O Compatibility with M32 Live
        GaryHiggins update: Howard, I was inspired this am to make sure I wasn't dreaming and put the X-Dante card in my M32R, and as suspected it works 100%. I had updated it to the latest firmware this past summer (4.08) but doubt it makes a difference as to if it works in a M32 or not. That said you would want to update either model to the latest version.
        • January 10, 2021
  • New
    Geoffwalker55
    Newcomer - Level 1
    2021-01-08

    Hi I have a midas f32 operating on windows7 using protools12 and a uad thunderbolt device somehow my pc aint seeing the mixer if i click on the midas icon i can see it anyone know how i a get rouind this issue please i would normaly take my rig to Parr Street Studios in Liverpool but thanks to covid this is not possible any help would be gratefullt welcomed

    Thank you

    Geoff

    read more...
    0 72
    • Geoffwalker55
      john0121 Hi Geoff, is this the firewire version or the USB version? Either way it would be best to fill out the tech support form via the Support button (top of page). A member of the team can then work through some troubleshooting with you. Thanks
      • January 10, 2021
  • New
    JoelJoel
    Newcomer - Level 1
    2021-01-08

    Hai...

    I have some problem to record Midi track using midas m32. Does anyone in here know how to configure record midi track using midi port in midas m32?

    Thanks for answer my question

    0 164
    • JoelJoel
      DaveMorrison If you are trying to send a signal from an external MIDI device (ie. keyboard) into the M32's MIDI DIN jacks and then have that signal be forwarded to your DAW, I have bad news. It won't work because there is no MIDI passthrough. The XR18/MR18's will. The M32/X32's will not.
      • January 8, 2021
    • JoelJoel
      JoelJoel Thank you dor ur info sir....
      • January 8, 2021
    • JoelJoel
      Maroliboe is it possible with the DN32-live card?? ( instead of using the DN32-USB card ) ??
      • January 28, 2021
  • New
    balky
    Contributor - Level 2
    2021-01-07

    Please see the video.  Wonder if the same happens with your board.

    When select inputs 1-16 Or 17-24 by pressing two buttons at the same time. It happens with specific scenes.

     

    read more...
    0 65
    • balky
      Paul_Vannatto You don't mention which 2 buttons. If you are pressing the 2 layer buttons, then, then it changes to the channel spill mode (which has been a feature since early 3.x).
      • January 7, 2021
      • m32r LIVE  - UPDATE 4.04.1 Weird fader behavior
        balky 2 layer buttons 1-16 Or 17-24. And faders' useless jumps as you can see in the video are weird, I never saw this before
        • January 7, 2021
Go to page