Statistics

207,653 members
79,750 posts
  • New
    Pugwash1
    Newcomer - Level 1
    2021-01-17

    Hi. My XT 6F speakers are really overbearing in the high frequencies. Very harsh especially on vocals.

    Im using a Musical Fidelity X-A2 amp which has been checked over and found to be fine.

    Any ideas?

    Thanks

    0 18
  • New
    Timons
    Newcomer - Level 2
    2021-01-04

    I have the Tannoy Gold 8s as front-right and front-left, with the Gold 7 as a center channel, and an Infinity 10" sub. I'd like to stick with Tannoys for the rest of my setup: a) 2x rear surround and b) possibly speakers to bounce sound off the ceiling. I may also swap out the sub, but that is lower priority.

    The challenge for the rear surround is that I need powered in-wall, since it will be really inconvenient to wire from the receiver to the surround location. I will need to paint over the grill to minimize the visual impact. My receiver is an Arcam AVR390, and I expect to be sending the signal wirelessly via an SVS wireless transmitter and receiver.

    Any recommendations for the rear Tannoy speakers?

    Thanks!

    read more...
    0 2
  • New
    nirpalbamrah
    Newcomer - Level 1
    2020-12-26

    Hello , hope you are all well and safe. I'm not sure if this is the right place to ask this but here it goes. 

    I'm looking for tannoy revolution xt 8f and tannoy Tannoy Precision 6.4

    Any help would be great.

    I live in england

    read more...
    0 5
  • New
    YuryMolkoedov
    Newcomer - Level 1
    2020-12-24

    Dear Community members, please advice what do you think about issue. 

    I have a pair of nice Tannoy Eyris DC3 floor speackers. But super tweeters were damaged my some little fingers. (Pushed inside)

    May be some of you already faced same problem and you managed to fix/replace it. Is there any big difference in sound then? Worth fixing? 

    I have already placed a ticket for spare parts. CAS-404264-P1C4J4

     

    By the way, what king of AMP will be the best combination for Jazz and Vocal music with this loudspeakers? I have NAD now. 

    Thank you!

    read more...
    0 5
  • New
    Newjin
    Newcomer - Level 1
    2020-12-24

    Trying to find and navigate the site to order dust cover for my tannoy cheviot hpd315a 1976

    Any help would be greatly appreciated  ? 

    Thank you In advanced 

    0 1
    • Newjin
      ChrisEdwards1 Hi Nam, I hope you are well. Unfortunately, we do not manufacture or stock dust covers for this model, in this instance we would recommend speaking with your local distributor who may be able to recommend a company that custom makes them to order.
      • December 23, 2020
  • New
    NaelBarakat
    Newcomer - Level 1
    2020-12-23

    Hello 

    I want to sell my Tannoy Ronald Hastings Rackham Prestige (limited edition).

    Do you know the value ?

    Thanks

    Nael 

    0 10
    • NaelBarakat
      ChrisEdwards1 Hi Nael, Unfortunately, this is not something we can offer much help with as we do not tend to keep copies of price lists from years gone by and we do not know the current value of older models.

      In this instance we can only recommend searching online as many older Tannoy models can be found being sold on sites such as eBay and Gumtree and looking here will give you a good idea of your loudspeaker's current value.
      • December 23, 2020
  • New
    joysec1
    Newcomer - Level 1
    2020-12-21

    I own one old Tannoy Glenier 10 and my friend has one Monitor Gold 15(Vintage model). We need spare tweeter pair for our speakers as the existing ones are old and may get defective anytime. These two models are not listed in MT spare list. Is there any other alternatives?

    read more...
    0 8
    • joysec1
      Nigel67 Hi Sanjoy, please goes to the support tab at the top of the page and submit a spares request. One of my colleagues will then get back to you with pricing and availability. If your speaker is not available when you select a product, please select any product and then add a note in the description which type of speaker it is and what you require and we will pick this up. Many thanks
      • December 20, 2020
    • joysec1
      joysec1 Thanks a lot Nigel. I hv already done that
      • December 22, 2020
  • New
    gerard33
    Newcomer - Level 1
    2020-12-18

    Hello - I have just joined this group. I need a replacement tweeter for my Tannoy Mercury M2 speaker, please.

    Could anyone help me? Or even direct me to somewhere I might get one.

    Thank you in advance - Gérard

    0 6
    • gerard33
      RexBeckett Hello Gerard. I suggest that you open a Care ticket for this.

      At the top of this page, click Support then scroll down and select Parts. Make sure that you enter all required (*) data before clicking Submit. The Care team will respond by email.
      • December 18, 2020
      • Replacement Tannoy M2 / M3 tweeter required please
        gerard33 Thank you Rex - I have now just submitted. fingers crossed ☺
        • December 18, 2020
  • New
    etto
    Newcomer - Level 2
    2020-12-09

    Hello 

     

     

    I live in Harrow HA3 0AX can you please tell me where I can hear these speakers Tannoy 

    REVOLUTION XT 6-GB

     

    Thanks

     

    Ty

    0 6
  • New
    Geoffgiligan1
    Newcomer - Level 1
    2020-11-24

    Hi, I have a pair of Tannoy 605 speakers one of which has blown the bass driver, I am looking for a replacement, the stock number on the rear of the driver is Tannoy 1661, are there any available please .         Thanks 

     

    0 18
    • Geoffgiligan1
      ChrisEdwards1 Hi Geoff, Unfortunately, due to the age of this model the parts you are requesting are now either discontinued or obsolete; In this case, we would recommend getting in touch with Lockwood Audio.

      Lockwood audio have been used by Tannoy for many years for servicing vintage Tannoy and supplying obsolete parts:
      www.lockwoodaudio.co.uk

      Alternatively please try the following eBay seller who stocks various old/rare components:
      http://stores.ebay.co.uk/mainlytannoy
      • November 24, 2020
Go to page