Statistics

249,554 members
126,577 posts
  • New
    SouthPTC
    Newcomer - Level 1
    2021-08-27

    I need to order 3 of these dongles. Can you help me with this?

     

    Carri Mefford

    PTC President 

    Fairfield South Elementary 

    0 24
    • SouthPTC
      WilliamR Hello, Please click on the support link above and create a parts case, someone will contact you ASAP.
      • Aug 27
    • SouthPTC
      SouthPTC

      I can’t complete the request on that site because I don’t know the model. I only know the exact part that I need.

      • Aug 27
    • SouthPTC
      SouthPTC

      • Aug 27
  • New
    DocBrown77
    Newcomer - Level 1
    2021-08-22

    I just purchased a Behrninger STUDIO50USB. I need to have a longer CABLE so the Speakers can be placed further apart.                   

     2 Questions:

    1.  What are the "specifcations" for the actual cable, since it is not a typical style plug (both ends have 4 holes). WHAT IS THE technical NAME for this plug?

    2. Where can I purchase a longer cable (for instance 10 feet or longer), since Behringer DOES NOT sell a longer cable.

    Thanks, DocBrown

    read more...
    0 13
    • DocBrown77
      DavidKnighton Hello DocBrown77,
      I don't have a straight answer, because I myself do not know the connector name. What I would suggest otherwise would be to splice the cable right down the middle and add 4 conductor cable of the same gauge. Use solder to weld the copper cables together and heat shrink to protect the leads. Make sure you don't mix up the leads or you risk damaging the components in the slave speaker.
      • Aug 23
    • DocBrown77
      DocBrown77

      David: Thanks. Great idea. Steve

      • Aug 23
  • New
    LowBee
    Newcomer - Level 1
    2021-07-14

    Morning all,

    Very close to hitting the button on this product to connect my X32 to 2 x 16 stage boxes

    Any user thoughts/opinions?

    I can't see if the screenshield is connected to the Ethercon shell, does it need to be?

     

     

    Really excited about first gig since March 2020, need all the gear to be rock solid (not sure what I can do about me!)

     

     

     

    Thanks and stay safe

    read more...
    0 48
    • LowBee
      GaryHiggins You will be very happy with it, high quality throughout, great reel included and yes the shields are connected and yes you DO want exactly that.
      • Jul 14
  • New
    DavidAbera
    Newcomer - Level 1
    2021-07-03

    i have a problem Behringer X32 rack sync  to S16

    please help me 

    0 45
    • DavidAbera
      Paul_Vannatto Is the X32 Rack set to master clock (setup, config, sychronization -> Internal)?
      Is the S16 set to mode 1 (all lights, eg Out+8, SN Master, etc. are off)?
      Do you have the AES50 cable plugged into the S16 AES50 A port?
      Have you tried another AES50 cable (yes they can go bad)?
      • Jul 3
    • DavidAbera
      DavidAbera Yes, I've tried all of them, but unfortunately it didn't work out.
      • Jul 3
    • DavidAbera
      Paul_Vannatto Have you updated the firmware to the S16 and X32 Rack to the latest?
      • Jul 3
    • DavidAbera
      DavidAbera I think the RJ45 socket A and B of the Berhringer X32 mixer is defective
      • Jul 3
    • DavidAbera
      Paul_Vannatto So you have the X32 Rack as master clock, the S16 in mode 1, the AES50 cable in the S16 port A, and S16 and X32 Rack firmware are both up to date, and you have tried other AES50 cables? If so, I would suggest you submit a ticket (click on Support above) to tech support to see about getting it repaired.
      • Jul 3
  • New
    Bearprod1nc
    Newcomer - Level 1
    2021-06-18

    Which device is best for connecting my iPad directly to the X32 rack via ethernet cable.

    0 42
  • New
    scotttedford
    Newcomer - Level 1
    2021-05-23

    Where can I buy one of these cables?

    0 65
    • scotttedford
      NicJonesMT Hi Scotttedford
      Please click support at the top of the page and submit a spare parts ticket. One of the team should then be able to advise you further.
      • May 23
  • New
    Markdb
    Newcomer - Level 1
    2021-05-18

    I am based in Ireland and I have 5 berhinger synths. 

    My plug board is getting very stacked and messy 
    I got the europeon plug heads with my synths with a uk adapter 

    The one I have is this = https://www.thomann.de/ie/tc_electronic_powerplug_12.htm

    I need the uk head for these plugs Like its sold here https://www.gear4music.ie/Guitar-and-Bass/TC-Electronic-PowerPlug-12-Power-Supply/

    Can you buys these seperatly can anyone advise me on this. 

    read more...
    0 61
    • Markdb
      Dale_M Hi there yes, "sliders" are available, please contact our Spares department by going to the Support tab above and selecting Spares.
      • May 18
  • New
    Rocky195
    Newcomer - Level 1
    2021-04-30

    Hello all 

    I can't record the audio in my Presonus DAW

    Deepmind6 is connected to my computer Windows 10/64 via usb cable direct. I have the two 1/4 connectors out from Deepmind into the front connection of die UMC 204 the I have midi out from DM6 to MIDI in on my interface. The interface is also directly hooked to my computer. Now I am not sure if I set up my DAW correctly I tried all kind of different ways but I can't get sound to record. 
    hopefully this is enough info, thanks for reading!

    read more...
    0 70
  • New
    Pastorwife
    Newcomer - Level 1
    2021-04-02

    Of like to be able to send out service to Facebook live using for cable and I have no clue how, I've looked at many YouTube videos but none show me step by step set up from where to plug it in the back output to getting all Musician's in. Thank You very much 

    read more...
    0 60
  • New
    marceinspain
    Newcomer - Level 1
    2021-03-27

    I would like to know if there is a way to connect my condenser mic with a xenic 802 to a uca222... (I already have these two..) to a Canon DSLR 550D digital reflex camara. Someone please help me to do this and tell me, please, with kind of conectors should I buy.

    Many thanks in advance.

    read more...
    0 68
    • marceinspain
      KyleJohnson Hello, Kyle here from Music Tribe. You would not need the UCA222 involved in this setup, simply connect from a pair of outputs on the mixer, or the headphone output on the mixer, into the mic input on your Camera. Depending on the type of input on the camera, you might need an 1/8" cable or RCA cables, but for that I recommend you reach out to Canon for more clarity.
      • Mar 27
Go to page