Statistics

249,690 members
126,740 posts
  • New
    Gsparkie
    Contributor - Level 1
    2021-09-07

    I have has some issues with Logic and wanted to see if Window 10 would be worth trying to do live recording. I can't seem to see more the 2 tracks from the USB connection to the XAir18. I back dated the Behringer drivers (as someone had suggested)and now a can see still only 2 tracks, but I can select tracks in pairs to only 2 at a time from input 1-8, still no way of recording a live band. Plugging the same USB in the IMac, all tracks are set up and there, no issues on the XAir18 side. I'm having problems thinking only Mac's can work DAW with XAir18's. I also tried the ASIO, but can find the WIN10 that works.

     

    read more...
    0 16
    • Gsparkie
      Paul_Vannatto Try using Reaper (www.reaper.fm) with the latest X-Air ASIO drivers (4.59). Don't use ASIO4ALL.
      • Sep 7
    • Gsparkie
      Gsparkie

      I guess the Xair 18 just in a Mac thing! So no one has these guys working with Windows 10?

      • Wed at 11:38 AM
  • New
    PedroCiarlini
    Newcomer - Level 2
    2021-08-26

    Hi guys.

    I'm about buy a new Apple MacBook model with apple silicon processor (M1) and BigSur OS... is the XR18 compatible with this new architecture/OS? I need to use the XR18 as an audio interface, plugged on que macbook through USB (and all needed adapters, of course).

     

    The same question to the MOTOR 61 controller... works fine?

     

    Cheers.

    read more...
    0 17
  • New
    t8bloom
    Newcomer - Level 1
    2021-08-23

    Hi, I just got my X-Live installed into my XR32 and am interested in multi-track recording when my band plays live.  I use a laptop with Reason for backing tracks and effects processing of some channels that is attached through the USB, and this works well.  When I went to do a test recording in X-Live I found that my effects processing returns were not recorded, but rather the clean unprocessed input.  Is there a way to set the taps for the SD recording to mixer channels rather than the raw inputs?  Is there a specific documenation that shows where the 32 channels of the SD are tapped from?  It would appreciate your help understanding the routing options that might be here.  Thanks!

    read more...
    0 15
    • t8bloom
      Nigel67 Hi t8bloom,. There is a block diagram of the X32 on page 70 of the operators manual.
      https://mediadl.musictribe.com/media/sys_master/h9b/h22/8849399545886.pdf
      The tap is set post the analogue gain. To be able to adjust the tap point you will need to use the 16 Bus Outputs and 16 Ultranet Outputs. in the Bus Outputs, assign the Direct Outputs for the first 16 inputs. You are then able to set the tap point you require. Do exactly the same in the Ultranet routing page but this time assign the 17-32 input channels. In the Card routing, assign Out 1-8, 9-16 for Outputs 1-8, 9-16 and assign Ultranet 1-8, 9-16 for Outputs 17-24, 25-32
      • Aug 22
    • t8bloom
      t8bloom Thank you Nigel67, I think this will work out perfectly for me. I'm using the first 8 channels for loop-through the USB to Reason, the second 8 for in-ear monitor mixes, but the final 16 are free for the ultranet post-fader method. That gets me enough channels to record everything I need. Looking forward to testing this at our next rehearsal. Thanks!
      • Aug 27
  • New
    MikeWazowski
    Newcomer - Level 1
    2021-08-16

    Hi

    Our church are installing a new Wing soon, we have designed the system around using Dante to link out to a PC for recording and a Stream mix. 

    Where would be the best place to purchase the Wing-Dante Card do any suppliers have them in stock?

     

    Mike

    read more...
    0 18
  • New
    Joinville
    Newcomer - Level 2
    2021-08-11

    Good Day,

    Is it posible to send audio signal to a Computer which is 40 mts away from my M32c using Cat5?

     

    0 35
    • Joinville
      RexBeckett Hi Joinville, you could use a KT DN9630, positioned close to the PC, to do this. This device converts AES550 to USB 2.0 and provides a 48 channel bi-directional interface. AES50 can work through upto 100 meters of shielded Cat5e cable.
      • Aug 11
      • M32C for Streaming
        KevinMaxwell I had to look up what the KT DN9630 is and that looks like a very interesting device. It has a control data port on it do you know if this is duplicating the Ethernet port on the back of the mixer so you could use X32 edit on the computer to control the mixer with that port?
        • Aug 11
      • M32C for Streaming
        DavidKnighton Hello Kevin, the control data port was intended for use with remote preamps, but the concept was abandoned. Now it's just a center piece for discussion.
        • 1
        • ·
        • Aug 11
      • M32C for Streaming
        Joinville Thank you Rex.
        • Aug 20
  • New
    thomaudio
    Newcomer - Level 1
    2021-08-08

    Bonjour, je m'appelle Thomas et je donne des tutoriels sur youtube en francais concernant la x32 et autres matériels. Les vidéos sont dédiées aux débutants.

    Bon Visionnage.

    https://www.youtube.com/watch?v=vvcwwyLKer8

    read more...
    0 32
  • New
    GioBlackmon
    Newcomer - Level 1
    2021-07-19

    Is there a quick fix to correct my AES50 inputs if they are red? I have two SD16s and can't connect with either one on A or B. When I connect to A the error says 'X32' and stays red. When I connect to B, A says 'X32' and B says 'SD16' and stays red.

    read more...
    0 34
    • GioBlackmon
      Paul_Vannatto Make sure that the AES50 cable is connected to the S16 port A and the S16 is in mode 1 (no lights on SN Master, Out+8, etc.) and the X32 is set to master clock (sync is internal).
      • Jul 19
    • GioBlackmon
      GioBlackmon

      I've had these SD16s for about two years and they have worked flawlessly for me. Now when I plug into AES50, it flashes for n/n quickly and the light is green. When I go to AES50 B, both AES50 A and B are red and the SD16 flashes red on the B side.

      • Jul 19
    • GioBlackmon
      Paul_Vannatto The AES50 cable has to go into the S16 A port only. It will not sync in the B port.
      • Jul 19
  • New
    smith837
    Newcomer - Level 1
    2021-07-11

    Im Trying to connect my DN9630 to the Midas M32R the blue light comes on for usb power but on the back there is a red light above the AES50 connector. Im using shielded CAT5 cable. The Midas doesn't show connection the AES50B port has a red light and says No device. Is there a step Im missing. My Computer is running Ableton live 10 with drivers for the DN9630 installed 

    read more...
    0 64
    • smith837
      Paul_Vannatto Is the samplerate on the DN9630 set to 48K and is the M32R also set to 48K?
      • Jul 11
    • smith837
      Dale_M Hi Smith,we’re sorry for your experience. Please submit a technical ticket from the support tab above. .
      • Jul 12
  • New
    mxrusb3
    Newcomer - Level 1
    2021-07-11

    Hi, 

    For the Zoom set up, I connect a micrpohone to this mixer and the mixer output (USB) to the main pc input USB.  And it works fine.  Now I want to connect another laptop as a background music source (from YouTube) while I am speaking on the mic.  Since pc output is not a a line level(already amplified for headphone), the mixer cannot take this music source.  It is too big voltage( I assume) and the sound is distorted too much.  What should I do to make this pc audio output level into the line level input? or Any suggestion to use pc source into the mixer such that I can use mic voice with music from the pc. 

    Thanks

    read more...
    0 42
    • mxrusb3
      Paul_Vannatto Connect the second laptop to one of the stereo channels (3/4 or 5/6) and turn the laptop volume down to about half-way and you should be good.
      • Jul 11
      • Behringer Q802 USB trouble connecting pc sound to this mier
        mxrusb3 Okay thank you. I will try that way. I thought I was lowing volume, but maybe not enough of it.
        • Jul 11
  • New
    KeithFisher
    Newcomer - Level 1
    2021-07-06

    Is anyone aware of a way to update the firmware for the S32 using a mac (as opposed to windows)?  I don't currently have a Windows platform machine nor do I particularly want to clutter my Macbook with an installation of Windows.

     

    Thanks

    read more...
    0 42
Go to page