Statistics

298,893 members
182,573 posts
  • New
    guitarsit
    Newcomer - Level 1
    2021-01-18

    Hi all, I am having a hard time finding an answer to the following so posting here to see if anyone can help. Thanks in advance.

    I have an MR18 I'm controlling from my Windows laptop. They're connected via ethernet for the MR18 controller, and USB for recording to DAW. Mixing and recording work fine. We're using 9 channels all with analog inputs and I'm using Acid Music Studio for my DAW.

    I also have 1 input where the source is set to USB, to play audio from the laptop back into the mix. This works fine for the live mix, but it's not being picked up by the DAW for recording. In the DAW I set the input for the track to be the channel I've got the USB running through -- just like how the other DAW tracks are set up -- but it doesn't detect the audio.

    All suggestions welcome.

    read more...
    0 46
    • guitarsit
      RexBeckett Hi guitarsit, you need to change the signal tap for the channel with the USB source. This is on the In/Out -> USB Sends tab. The default tap is Analog which is directly from the analogue input A/D converter. If you change the signal tap to Input it will take the feed from after the analogue/USB switch and therefore record the USB playback. Make sure that you don't enable record monitoring to the same USB track in the DAW software or you will get digital feedback.
      • January 18, 2021
      • Recording channel where source is USB
        guitarsit That did the trick. Thank you!
        • 1
        • ·
        • January 18, 2021
  • New
    PSdrums
    Newcomer - Level 2
    2021-01-15

    Hello guys, I am having trouble with my M32 working with Studio One. I am getting signal out of the DAW in this example a loop.

    But it seems I am getting no signal in the Daw and the faders aren`t moving when I slide the m32 faders.

    Who can help me with a proper connection. Or isn`t Studio One not the most suitable DAW for the MidasThanks in advance!

    BR Peter Steur

    read more...
    0 63
    • PSdrums
      Paul_Vannatto What do you have assigned on the Routing, Card out screen?

      For full M32 integration, I would suggest using Reaper with Patrick's X32Reaper app (found here https://sites.google.com/site/patrickmaillot/x32#h.p_DUz7OP4Wmg0- ) or his commercial X32Automate (found here https://x32ram.com/ )
      • January 15, 2021
    • PSdrums
      PSdrums Thank you for you reaction Paul. On my board card out screen i have 32 in 32 out assigned (not the usb 2 T).
      • January 16, 2021
      • M32 fully working with DAW Studio one
        Paul_Vannatto Wrong screen. What you describe is the Setup, card screen. I was asking what you have assigned on the Routing, Card out screen.
        • January 16, 2021
    • PSdrums
      PSdrums Comes reaper with full automation?
      • January 16, 2021
      • M32 fully working with DAW Studio one
        Paul_Vannatto Reaper and the X32 can be fully integrated using Patrick's apps
        • 1
        • ·
        • January 16, 2021
  • New
    sethmajor
    Newcomer - Level 1
    2021-01-15

    Hello everyone. I am trying to set up a Midas Venice U32 to a laptop to stream from through OBS.  When I plugin the USB from U32 to the computer I get a driver error message. I have attempted to locate the correct up to date driver bought cannot get the audio to the OBS system. 

    Thank you for any guidance.

    read more...
    0 424
    • sethmajor
      DavidKnighton Hello Seth,
      Are you getting any audio into your computer or no audio at all? Does your computer even recognize the U32 as an interface? Are you using Mac or Windows? If Mac, you need to update the firmware via Windows computer in order for the USB to discover on Mac. The update tool is here https://www.midasconsoles.com/midas/product?modelCode=P0AJK under the SOFTWARE tab.
      • January 15, 2021
      • Midas Venice U32 Driver
        sethmajor No Audio at all. It is recognized in my computer control panel but shows driver error. I am using Windows. I will try the update thank you!
        • January 15, 2021
      • Midas Venice U32 Driver
        sethmajor When I click on the link it opens to VU24, is it the same driver for the VU32, which is what I have?
        • January 15, 2021
      • Midas Venice U32 Driver
        DavidKnighton They are the same drivers for either console frame.
        • January 15, 2021
      • Midas Venice U32 Driver
        sethmajor I tried the link that you provided but it says I do not have the correct windows operation, is there a driver of windows 10? Or another option to get sound from the mixer to my computer besides the USB?
        • January 16, 2021
  • New
    reggie1024
    Newcomer - Level 1
    2021-01-11

    Hey Everyone.  I've been on this site trying to get in touch with a representative for midas for warranty purposes and the page it directs me to never seems to be working. Has anyone else had this problem? Are there any other solutions?

     

    read more...
    0 121
    • reggie1024
      KyleJohnson Hi Reggie, Kyle here with Music Tribe. In order to contact our Service team, please click on Support at the top of the page then scroll down and select Service Request. Fill out the form and submit.
      • January 11, 2021
  • New
    balky
    Contributor - Level 2
    2021-01-07

    Please see the video.  Wonder if the same happens with your board.

    When select inputs 1-16 Or 17-24 by pressing two buttons at the same time. It happens with specific scenes.

     

    read more...
    0 64
    • balky
      Paul_Vannatto You don't mention which 2 buttons. If you are pressing the 2 layer buttons, then, then it changes to the channel spill mode (which has been a feature since early 3.x).
      • January 7, 2021
      • m32r LIVE  - UPDATE 4.04.1 Weird fader behavior
        balky 2 layer buttons 1-16 Or 17-24. And faders' useless jumps as you can see in the video are weird, I never saw this before
        • January 7, 2021
  • New
    skipweaver50
    Newcomer - Level 1
    2021-01-04

    Hello everyone.

    I am trying to find out how to save every single thing on our Midas M32 so that if one day we walk in and all the settings are changed we can load them back to how we had it. Also, we want to have different settings saved for a different service, such as for the individual microphones. Is that called scenes? Can someone walk me through how to save those?

    Thank you for your assistance!

    read more...
    0 1,799
    • skipweaver50
      Paul_Vannatto Hi Anthony, scenes can save almost all settings on the M32. The only settings it doesn't save are the scene, cue, snippet lists as well as the Library presets and the first 4 screens of the Setup sections. If you want to save the cues, scenes and snippets, you would export (using the Utility button) the show (from the Cues screen. If you also need to save the settings on the 4 Setup screens, there are some 3rd party tools available.
      • January 4, 2021
      • Save Everything On Midas M32 And Changes Scenes
        skipweaver50 So if I save a scene, will it overwrite what is not saved? Does a scene save the output level for each channel?
        • January 5, 2021
      • Save Everything On Midas M32 And Changes Scenes
        Paul_Vannatto When you save a scene, you would go to the Scene screen, select a slot then save it. Anything in that slot will be overwritten by the new scene you are saving (if that is what you are asking). Yes the scene saves all output levels. If you want to see what a scene saves, export the scene (either using the Utility button on the console) or use X32-Edit, then have a look at the file using a text editor (eg. Notepad++).
        • January 5, 2021
  • New
    H6227
    Newcomer - Level 1
    2020-12-21

    Recently had to take the fader bank out and top screen bank loose to replace a broken screw in the fader bank. Plugged everything back in now I get a series of beeps and a blank screen. Did not unplug anything on the screen bank..just took screws out and moved it to get to side panel screw. 

    read more...
    0 148
    • H6227
      DavidKnighton Hello Hank,
      A series of beeps generally indicates trouble within the boot sequence on the MC. In my experience, multiple beeps usually means the system RAM is not detected. If your MC contains a compact flash card, try pulling the RAM from Slot 0 and placing it into Slot 1, then try a reboot.
      • December 22, 2020
  • New
    TNTSound1620
    Newcomer - Level 1
    2020-12-17

    As a Dealer/Distributer I've been left in the dust as to how future orders can be made. Is the only option to purchase from big internet stores like amazon? If so this is unfortunate as so many dealer/distributers have spent years implimenting them into businesses and HOW to build up your sales to then just be left behind and not be able to provide support to our customers is a huge slap in the face. I'm looking for a real system and solution for ordering Behringer/Midas products to support my customers.

    read more...
    1 88
    • TNTSound1620
      KyleJohnson Hi James, Kyle here with Music Tribe. Please contact us through the Support portal at the top of the page so that we can get you in contact with the right people.
      • December 18, 2020
  • New
    rgalv001
    Newcomer - Level 1
    2020-12-17

    How can I get a multitrack track live recording using an SD Card in slot 1. I tried but only a single .wav file records. Then it will not open on my Mac. I need help step by step. Couldn't find on manual. I am able to record on a flash drive in stereo, but would like multi-tracks so I can mix in Logic Pro.

    read more...
    0 58
  • New
    ZackMorris
    Newcomer - Level 2
    2020-12-15

    Hello! I am looking at a used Midas XL8 digial console system for an install. I have not set up a XL8 before and it looks like all of the AES50 ports on the routers (DL461) and all of the AES50 ports on the control surface have redundent AES50 ports. An X port and a Y port. We use 2 KT DN9650s in our set up. One for USB and one with a MADI card... they do not habe redundent AES50 ports... with the XL8 am I fine to just connect to the X OR just the Y AES50 port or will it only work with I/O with redundent AES50? 

    Thanks! Zack Morris 

    read more...
    0 75
Go to page