I have a snippet in firmware 3.1.1? that worked recalling only the master fader L/R to 0.0 - 

It does not work in 4.0.2

I saved a new snippet in 4.0.2 with the master fader at 0.00 and recalled it and there was no effect on the master.

Is this possible to do? (don't ask why =), it's needed....

Appreciate any input

Title says it all.

When I make a DCA 'safe' under the channel safe tab. It still respects and changes to the level of the snapshot being fired.

Must be that the 'children' faders are safe??

Is there an easy way to exclude a DCA in a recall so it stays where it is?

I am looking for a way to interface with Thunderbolt 3 from UAD Luna recording software running on Mac Mini and stack of UAD hardware (2 Apollo x8p and 1 MKII) from Midas M32R. The objective is doing live recording using Luna and using UAD plug-ins for live performance. 

Would greatly appreciate any pointers for this set-up. Due to the distance of the set-up of two stations (M32R and UAD equipment are not co-located), the long ADAT run is not feasible (more than 15'). 

Thanks!

Hi Guys, Im barely getting started to know this mixer and i have not been able to use thee wifi client. i followed indications and videos on youtube regarding connecting via ethernet and inputing the WLAN info, closing the app and turning off the mixer. When i turn it back on it does not detect the mixer unless i plug in the ethernet cable or switch to access point. Any suggestions reegarding this?

Wish they would come up with a new firmware that allows to control the mixer via the usb cable since i am already connected to my laptop for DAW

Asked this a couple of years ago and no answer and no new products since then either. Should I ditch Midas and go with another brand that actually released new better products lately?

Seen nothing new since M32 (live version was just same as old M32 with a better recording card). Meanwhile there has been many new products from competitors like Allen Heath, SSL etc. all leapfrogging Midas. The new Heritage D is still nowhere to be found. The M32 can't compete with Allen Heath SQ serioes. The Pro 2-3 there are many newer better consoles etc. Did Behringer kill Midas off? The Behringer wing is loosing bad to the Allen Heath SQ series. The Pro series is loosing to Allen Heath 3 new lines and the top is loosing to Avid and SSL. Should I just cut my ties with Midas?

This is important to my company since we are in dire need of updating our Midas mixers. But do we need to change brand too?

Hello all.

Working to enhance a live-webcast application in our church. Our setup is:

Sanctuary:
   M32 with all sources connected to LocalIn1-32 & AuxIn1-5
   Plans for addition of DL16 connected via AES50 to this console for stage flexibility
   All house PA and IEM monitors run from this console

Webcast Room
   M32R with no local inputs or outputs
   Output to WebCast Mac via ch1-2 of USB mapped from L-R
   ***imminent future*** replace M32R with M32C

AES50 connex:
   M32[A] <> [B]M32R
   ***imminent future** DL16[A] <> [B]M32[A] <> [B]M32R

(Sanctuary) M32 AES50 patch
   AuxIn 1-6/T >> AES50[A] 1-8
   UserIn 1-32 >> AES50[A] 9-40
   LocalIn 1-32 >> UserIn 1-32 (for future selectivity of DL16 inputs)

(Webcast) M32R Input Patch
   AES50[B] 1-6 >> AuxIn 1-6
   AES50[B] 9-40 >> Channel 1-32

(Thanks Rex and Paul for their previous help in making this work.)

Hopefully all that makes sense. I really DID NOT want to paste 10 screenshots to create a 1.5m long post. ;-)

Now my questions.

1. We have (Sanctuary) M32 TalkBack [A] mapped to all IEM monitors buses in that same console.  Is there a way to get (WebCast) M32R talkback to M32_TB[A] or these same M32 buses so the WebCast tech can communicate with the stage talent?  For clarity, we need to retain the ability for the (Sanctuary) M32 tech to TB to the IEM buses.

2. What is the purpose of the PreAmps screen in M32_Edit/Setup?  Looking at both the M32 and M32R screens they appear to be exactly the same.  I thought the HA gains were set in M32 and that M32R had no control of HA gain.  What am I missing regarding /Setup/Preamps?

3. On the same M32_Edit/Setup/Preamps screen, what is
    Global_Options-Lock_Stagebox ?
    Global_Options-HA_Gain_Split ?
    HA_Remote-AES5-_Port_A or Port_B ?
and how will these options function differently on the (Sanctuary) M32 vs the (Webcast) M32R?

4. Of the settings selected in M32_Edit/Setup, which become part of a scene file created from that console?
    \Connection ?
    \Mixer ?
    \GUI Prefs ?
    \Midi Control ?
    \Preamps ?
    \Card ?

5. Of the settings selected in M32_Edit/Routing, which become part of a scene file created from that console?
    \Inputs ?
    \AES50 ?
    \Card ?
    \XLR ?
    \Out 1-16 ?
    \Aux Out ?
    \Ultranet ?
    \IQ Setup ?
    \User In ?
    \User Out ?

Sorry for the marathon post. Thanx in advance for your sage assistance.
Dwayne A