Statistics

268,986 members
148,640 posts
  • New
    davidmaier
    Newcomer - Level 2
    2022-01-19

    I seem to be unable to reposition the faders in xair. Please help. 

    0 5
    • davidmaier
      Paul_Vannatto What app are you using and are you certain that you are connected to the XR18?
      • Wed at 3:28 PM
      • Xr 18 reposition faders
        davidmaier I am using xair in an iPad. I have two xr18s been using them for a few years. For the life of me I can't figure out how to relocate the faders. Watched a guy do it on utube I can't do it. Setup to layout edit drag and drop. Doesn't work for me.
        • Wed at 3:42 PM
    • davidmaier
      Paul_Vannatto I take it from your second description that you don't want to reposition a fader. Rather you want to rearrange the channel strip order. Unfortunately I don't use an iPad, but use Mixing Station on an android tablet and X-Air Edit on my laptop. So I can't be of much help.
      • Wed at 5:25 PM
      • Xr 18 reposition faders
        davidmaier Yes I want to rearrange the channel strip order. Thank you for trying.
        • Wed at 5:32 PM
  • New
    gerardv
    Newcomer - Level 1
    2021-12-19

    I use an ipad on stage. I use the Qlab app for cues and the Flow 8 app to manage levels on the flow 8. Sadly it seems that the flow 8 iPad app wont go tinto split screen mode so I cannot have both apps show at the same time.

    Has anyone got a solution or option that would allow me to use them both on the ipad screen in split screen mode?

    read more...
    0 15
    • gerardv
      Nigel67

      Hi gerardv. Unfortunately the Flow Mix currently does not support split screen handling. The GUI is designed for full screen landscape orientation. A workaround to be able to use both apps at the same time would be to drag the Qlab app 'on top' of Flow Mix.

      • December 20, 2021
  • New
    soundtechmike
    Newcomer - Level 1
    2021-12-17

    ON My XR18 I have been using My old IPad 2 It has always worked great. But lately i have been thinking about using my Laptop with windows 10 with the xr18 app i downloaded on it on stage hardwired with a cable to my router. Will there be any conflicts with both running at the same time? I'm scared i might loose saved shows or something.

    read more...
    0 11
    • soundtechmike
      Paul_Vannatto No there will not be any conflicts. But anything stored on the iPad is on the iPad only. What you need to do is to load each show (from the iPad) onto the XR18, then save as snapshots. Then using the X-Air Edit on the laptop, save those snapshots to files.
      • December 17, 2021
  • New
    drumbella
    Newcomer - Level 1
    2021-09-27

    Is there some limitation on scanning for a console on the complete network scope with the IOS app v.1.2.b12? My network is a 10.10.10.0/23 scope. Which means I have 10.10.10.1-10.10.11.254 addresses available. If my iPhone has an IP of 10.10.10.X it scans and finds the console which is 10.10.10.40. If my iPhone happens to have an IP address of 10.10.11.x it will not find the console. I can manually enter the IP of the console and it works fine.

    read more...
    0 16
    • drumbella
      PedroRodrigues Hi drumbella,please consider that WING-Q can only scan class c addresses, otherwise the console scan would take forever. So if you have an “exotic” address, you need to do a manual connect. The "exotic" address is stored though, so that on the next scan it should work.
      • September 28, 2021
  • New
    WayneWickman
    Contributor - Level 2
    2021-08-25

    Like many I use the X Air busses to send monitor mixes to band members. I like effects on my bus to make the overall listening experience better. Problem is I can't always get effects to come across on my bus. I have a "Practice" scene that I use for rehearsal in my studio which DOES have effects coming to my bus. I often use this scene as a template for live shows. When it comes to the show I have NO effects in my bus. I often use other engineers to run my rig during live shows, so I thought maybe they are changing something. But I've looked at every possible setting between the two scenes and I find no differences. What can I be missing?

    Thanks,
      Wayne

    read more...
    0 27
    • WayneWickman
      DavidKnighton Hello Wayne,
      Like any other input, you'll need to SEND the effects return channels to any particular bus. Check that the SEND from the effects return to the mix busses is not POST FADER, as this will affect the send level. Make sure it's set to PRE FADER. The default setting is in fact POST FADER for the effects return channels, so be sure to change that over on the SENDS tab with the effects channel selected. See screenshot. What I would suspect is that the guest engineer is turning the effect return channel down in the main mix, and it is in turn affecting the send level to the monitors.
      • August 25, 2021
    • WayneWickman
      DavidKnighton
      • August 25, 2021
  • New
    davidreetz
    Newcomer - Level 1
    2021-08-17

    Hallo,

    For a gig on saturday I would like to connect my MAC with a X32. The connection fails because my MAC says that the firmware of the X32 is not updated. I thought that X32-edit would be compatible with 'old' X32 firmwares. Do you know a solution apart of updating the firmware of the mixer?

     

    Regards, David

    read more...
    0 32
    • davidreetz
      Paul_Vannatto I would suggest you update the X32 to the latest firmware and use the latest X32-Edit. Each version of X32-Edit has the specific newer features of each of the specific firmware.
      • August 17, 2021
  • New
    Gabejcole
    Newcomer - Level 1
    2021-07-06

    Please somebody explain to me why there is no offline edit/demo mode on the Wing Co-pilot app. So many times I am away from my mixer but want to mess around with the app and some different functions. Please update the co-pilot app!

    1 144
  • New
    tedf0rd73
    Newcomer - Level 1
    2021-05-26

    Is the X air 18 compatible with a galaxy tab a7?

    0 84
    • tedf0rd73
      Paul_Vannatto It should work fine. I've been using a Galaxy Tab A 8" tablet with the X-Air and X32 consoles for over 5 years now without any issue.
      • May 26, 2021
    • tedf0rd73
      tedf0rd73 Awesome!! Thanks, Paul
      • May 26, 2021
    • tedf0rd73
      tedf0rd73 How do I download the app to control my XAir 18?
      • July 7, 2021
    • tedf0rd73
      Paul_Vannatto Go to the Play Store and search for X-Air App. The best app is Mixing Station Pro.
      • July 7, 2021
  • New
    Paul_Vannatto
    Volunteer Moderator
    2021-05-17

    Hi everyone,

    I have just released an update for the Live Toolbox and Scene Parser family of apps, with some bug fixes and enhancements.

    X32 Live Toolbox v1.33

    X-Air Live Toolbox v1.33

    MX Terminal v1.08

    LT_Command v1.08

     

    X32 Scene Parser v1.15

    X-Air Scene Parser v1.02

     

    read more...
    2 38
  • New
    tonemotivates
    Newcomer - Level 1
    2020-12-07

    I feel so silly, but I can not for the life of me find the software needed for the podcastudio2 ive been looking for hours and the quick start guide says to download software before connecting it to my mac. PLEASE HELP

    0 81
    • tonemotivates
      john0121 Hi Tonya, sorry it's missing from the webpage for podcastudio 2. You can find the same software bundle for download on this page though:

      https://www.behringer.com/behringer/product?modelCode=P0794

      Just click software on the right and there is a link for "all software for mac". Don't forget to register the product too (via support button) and you'll get a redemption code for Tracktion DAW.
      • December 7, 2020
Go to page