Hi All
VL3x;
how do I remove a key assignment that I've accidentally saved with a patch.
thx in adv
Mat
Hey @MatCaird,
Go into the "Vocal" menu, and on the "Harmony" tab, set all the "Mode" parameters ("Mode V1", "Mode V2", etc.) to "NatPlay" (NaturalPlay). This tells all the harmony voices to listen to the various inputs (guitar, auxiliary, RoomSense, etc.) instead of sticking to a specified key. Then go back to the "Home" menu and double-tap the "Store" button to save your changes. Cheers!
Hey folks,
Just getting the word out that we've relased updates for the Perform-V and Perform-VK mobile apps on iOS. Users were having issues using the apps after the update to iOS 13, but our team has created, tested, and released the fix. Here are the release notes:
If you haven't already been prompted to update, you can find the Perform-V app here, and the Perform-VK app here. Cheers!
Though still unable to 'beam' via audio. (iPhone XR iOS 13.1.3)
Perform VK via a lightning to USB adapter works like a champ.
Instant downloads- click a preset and in a half second you can audition it. This greatly expands the V series in terms of harmony intervals, variable auto-tuning, and I assume radical Tone settings. Also of note a massive firmware improvement that now allows the Aux and Instrument inputs to mix only into the VK's headphone out. Thus you can monitor your voice and instrument in the headphones but only your voice with effects goes to the PA (House) mix. A+!
I have to say, I’ve never been more frustrated by a company’s lack of service and intentional distancing themselves from their consumers.
I have been trying to get information on the MIDI capabilities of the Voicelive Rack 3 for over three weeks.
No one in sales at any of the online music stores know anything.
The TC website is impossible to navigate, there are no email adresses or phone numbers.
The money is in the bank, just waiting to be spent.
Why do I have to use a message board to get my questions answered?
Hello-
I am considering the VL3 Extreme Rack and have several questions.
Looking for a MIDI controller that has a built in volume pedal that can be mapped to parameters like delay level and anything else I’d like to adjust in real-time.
Trying to incorporate the looping functions, I know they aren’t supported by MIDI but wondering if the proprietary switch can be connected to a MIDI foot pedal in the same way that an amp channel switch pedal can used. Sometimes hard switches like this can be included in a MIDI preset.
What are the best options for controllers? Looking at the Roland and Behringer.
Thank you!
I guess there is only one rack version?
Ok.
MIDI info doesn’t show anything about mapping that I can see. I would like to have my guitar pre on the same MIDI cable with some presets able to change a vocal effect without changing guitar and vice versa.
Just looking for a foot controller for live playing.
The Behringer looks good.
Can I program mapping there?
Can I run a 1/4” cable from the Behringer to the foot switch in on the rack and access the looper or should I just add the TC 3 or 5 button switch to my set-up?
as for the Behringer FCB 1010 i recommend you get in touch with a Behringer product specialist for in depth information
I work in TCe Guitar R&D and don't know the product in depth unfortunately
There is a free editor available, so seting up the buttons and switches on the FCB 1010 seems quite comfortable.
https://www.youtube.com/watch?v=MMJQ-AHRSMs
there is also the famous UNO upgrade available to expand the FCB's functionality:
https://www.fcb1010.eu/ (third party alternative OS for fcb1010)
you can configure buttons /switches to send Prg change or continous Midi CCs (with upper and lower value limit)
More infos on the FCB 1010 features can be found in the product manual:
https://media63.musictribe.com/media/PLM/data/docs/P0089/FCB1010_P0089_M_EN.pdf
Best regards,
Mike
Thank you so much.
Just to be clear, my ONLY rack mount option is the old one?
No chance of any new release?
I just want to know why I can't use my app from tc helicon on my phone , the app perfom v , when I try to use it , suddenly closes
image.jpg Hey @juanermaza,
We have just released an update for the Perform-V and Perform-VK mobile apps! Here are the release notes:
If you haven't already been prompted to update, you can find the Perform-V app here, and the Perform-VK app here. Cheers!
I bought my first Voicelive 3 Extreme about 4 months ago and noticed everytime I plug my Guitar output (Dual Mono) to my amp a loud Hum/Whine noise comming from the amp. When I plug my VL to my pedalboard, cause of the longer path, it obviously goes louder and make it impossible to use it live. The noise doesn't seems to appear on the mic output. I have tried almost everything (ground, better isolation, new power supply) but didn't seems to fix it. Do you think it is the hardware defecting? Or an update of the firmware could potentially fix it?
If anyone know what it is or could help me because I cannot wait to incorporate it to my set up...
Thanks
Hey @polm,
If you get in contact with our support team they'll be able to help you troubleshoot this further. I can say we've never experienced that here, so I don't think it's firmware but rather something with your actual setup. Feel free to share your entire signal path and others could help you out here too. Cheers!
Is there a way to reset the PlayAcoustic back to default settings?
Thanks
Need help using VL3X as an audio interface with my ipad. Trying to use quantiloop app as my 4 track looper rather than the looper on VL3. Any help out there?
Hi there,
I've been using a Voice Live 2 in the studio and a Voice Voice Live Touch 2 for live performances.
I start to miss some features on the Voice Live Touch 2, more specifically the just Intonation setting and midi notes 4chan.
I've read in the manual of the Voice Live Touch 1 that it does midi notes in 4chan but Just Intonation is not mentioned. However in this video of this editor
https://www.youtube.com/watch?v=nB7n4Gf5Jj0
there is a tap for the "Tuning" Parameter set to Equal. This for me indicates that it is possible to set the Voice Live Touch to Just Intonation. Would somebody mind clearing this up? Is it that this feature is somehow hidden in the sysex implementation?
Hey @SimonSchmidt,
Yes indeed that "Tuning" parameter in the Harmony block is hidden away in sysex land. We don't typically share sysex manuals, but this product is so old... ¯\_(ツ)_/¯ I've attached it for you. At sysex offest 22 you'll see there's a "Harmony Tuning" parameter which is probably what you're after. It looks like it has 3 possible values, without deeply digging into the code I can't tell you what those are... But in VoiceLive 3 the three tuning references are: equal, just, and barbershop, in that order. It might take some experimentation to figure out what they are in Touch 1, but hopefully this gets you on the right track. Cheers!
Look out for a email with your unique access code and details on how to join.
We look forward to seeing you soon!
Look out for more session announcements soon on our social media channels and at www.musictribe.com
EN
ES
ZH
ID
JA
FR
DE
.
All Categories
Stands and Accessories
Microphones
Mixers
Voice Processors
Audio Interfaces
Effects and Signal Processors
New
Recently Updated
Popular
Unanswered
Solved
Discussions
Videos
Photos
Files
