Statistics

267,861 members
147,371 posts
  • sellis67
    Newcomer - Level 1
    2020-09-25

    What peripheral device do i need to set up to trigger the proper chord on the harmony, i dont see a MIDI output on the pedal.

    0 73
    • sellis67
      PedroRodrigues Hi Scott Ellis, with the VoiceLive Play the only option for peripheral control is via TRS as you can see on the picture attached
      • September 25, 2020
    • sellis67
      kiskadar69 For VoiceLive Play, a chord must be sent to Aux In or the RoomSense microphone for NaturalPlay to work.
      Normal MIDI control requires a TC-Helicon effect with a MIDI In connector.
      • September 25, 2020
      • VoiceLive Play Harmony
        sellis67 If I'm sitting at my keyboard and singing with a harmony patch on voicelive play, how would I send the chord to an aux in? Or is my only option the 835 microphone and, in that case, does the microphone sense the chord through the speakers?
        • September 25, 2020
      • VoiceLive Play Harmony
        kiskadar69 Be creative.

        1. If your keyboard has a stereo output, you can connect one of the outputs to VoiceLive Play Aux In, or
        2. Send the keyboard outputs to a mixer and connect the mixer's Ext Aux Send to the VoiceLive Play Aux In (the mixer should be set to send only the channel of the keyboard to Ext Aux Send).

        Anyway, you'd get the best results with the VoiceIve Play if you only send left hand chord stuff and also have chorus/reverb off on the keyboard output.
        It would be best to use a vocal machine with MIDI instead of VoiceLive Play.
        • September 26, 2020
  • elk1952
    Newcomer - Level 1
    2020-09-24

    Is there a link that will allow me to update my voicelive play gtx     i need to add the setting to fill the blank spaces

    0 65
  • edtullett
    Newcomer - Level 1
    2020-09-23

    Hey guys, I purchased a VoiceLive Touch 2 from you on eBay refurbished recently. It has the blue screen problem and is unusable. I managed to find the mac OS fix, but have tried it twice and it doesn't fix the problem. Please help, as I currently have a product I literally can't use!

    read more...
    1 499
    • edtullett
      Dale_M Hi Ed, can I suggest you follow the process in the KB below? Let us know if this works for you. https://musictribecommunity.powerappsportals.com/en-us/knowledgebase/article/3720
      • September 23, 2020
      • VoiceLive Touch 2 - Blue Screen, Fix not working
        edtullett yes this is exactly what I've tried a couple times, hasn't worked at all.
        • September 23, 2020
    • edtullett
      edtullett any ideas? If I can't fix this then I'm going to need to return the product.
      • September 24, 2020
    • edtullett
      Dale_M Hi Ed, you should try the above suggestion on a Windows Os machine as it may not work with a Mac.
      if after this you are still having issues, as you have acquired the unit refurbished from eBay you need to contact the reseller and request assistance on the unit to hopefully avoid any more trouble in this matter.
      • September 28, 2020
    • edtullett
      jape10 I have same problem...in case 3720 article is no any softeware file so where can I find it? Just Blue light on...
      • November 17, 2020
  • stansongman
    Newcomer - Level 1
    2020-09-21

    I use Gig Performer, which for the voicelive3 sends program changes for my presets.  I also run a MIDI file player in GP which provides the MIDI data to control the harmonies.  For each rackspace (song) in gig performer I send a PC to set the preset.  Often, the PC value is zero, because the first preset is my basic preset.  The harmonizer is set to the "Tight Voices" preset.

    The strange thing is that when I am switching songs in Gig Performer, sometimes the harmonizer in my basic preset is set to some kind of lower octave harmony, even though when I look in the voicelive3 settings the harmony preset is still showing Tight Voices.  If I change the preset to something else and then come back to Tight Voices, it resets to that setting correctly. Of course I can't do that in a live show, there's some kind of problem with moving to that preset.  Has anyone experienced anything like this?

    read more...
    0 51
    • stansongman
      PedroRodrigues Hi Stan Swiniarski have you tried to save your presets on VoiceSupport erase all your presets on the unit and load the presets back again to your unit?
      • September 22, 2020
      • Voicelive3 Extreme changing Harmony settings upon Program Change
        stansongman Great idea, I have not done that. I'll give that a try and see what happens.
        • 1
        • ·
        • September 22, 2020
    • stansongman
      stansongman So, I backed up my presets, reset the Voicelive3 to factory settings, restored my presets and the same thing happens. I also updated the unit to the latest firmware. As I'm changing songs in my set list, the VL3 will change as it's supposed to via PC messages. Many times it's PC 0, my basic setup. I'll start singing and even though the Harmony setting says "Tight Voices", it's set to a harmony preset which is a lower octave doubler. Very frustrating.
      • October 21, 2020
    • stansongman
      PedroRodrigues Hi Stan, please submit an assistance request via the link below so we can help you with more comprehensive tools. https://community.musictribe.com/pages/create-new-ticket?type=Technical%20Support
      • October 21, 2020
  • Jaybecerra
    Newcomer - Level 1
    2020-09-18

    Hi 

    I recently acquired a used Voicelive2 and as I am configuring presets and "steps" I noticed that when changing steps while singing, the reverb sound seems to stop. I'm using the same type of reverb and the same settings in a single preset, the "steps" only modify harmony settings. Is there a way to prevent this? I can't believe that this magnificent piece of equipment has this kind of downfall...

     

    read more...
    0 58
    • Jaybecerra
      PedroRodrigues Hi Sergei can you please confirm if you selected any pre-programmed style and also please confirm how is the Decay and Width are set, the stereo imaging of the Reverb effect.0% is mono, 100% is fully stereo.
      Please also confirm the LO COLOR / HI COLOR as these are preset-frequency filters inserted into the Reverb feedback that tailor the low and high frequency response and decay of the tails.
      I hope this helps
      • September 30, 2020
      • Voicelive 2 and reverb between steps
        Jaybecerra Hello Pedro, thanks for your reply and I'm sorry for my late late reply.
        I created the second step as a copy of the first while only changing the set key for harmonies (from G to F) so, the reverb has the exact same parameters...
        • 1
        • ·
        • February 24, 2021
  • bdbutler
    Newcomer - Level 1
    2020-09-18

    Hello!  I am a huge fan of the TCH voice processors, however, I am super frustrated with my VL Play.

    I have a Surface Book 2 with the Surface Book Dock.  It is all USB 3.0 based both on the Book and the Dock. At one point I was able to connect my VL Play to the Surface Book and Use Voice Support 2 to manage my presets.

    After a few major and minor windows updates, the surface book will not even see the VL Play. So of course, neither will Voice Support.

    With the Play connected I have checked Device manager and noted that there is a problem with a USB Port Reset error when it is plugged in.  I have tried the following:

    1. Disabled the errored item in Device Manager.
    2. Scanned for changes and re-installed.
    3. Checked the Sound Control panel to make sure the device is not disabled. (it doesn't show due to 1 and 2)
    4. I have tried restarting AND shutting down and powering back up.
    5. I have tried changing the order of connection with Voicesupport and the VL PLay.
    6. I have tried updating the drivers through device manager.
    7. I have tried updating the drivers through Windows Update.

    Is there anything I can do. I loved using Voicesupport to do mass management of my presets for setlists and backing up large numbers of presets.  I currently am unable to do that or do firmware upgrades.

    Thank you so much for your help

    Dan

    read more...
    0 76
  • nkrcompany
    Newcomer - Level 1
    2020-09-16

    Voicelive2, Voicelive play have MIDI CC114 control message to bypass effects. I cannot find any information about bypass MIDI message in Voicelive 3 extreme manual. I've tried sending CC114 with 127 value but nothing happens. Can you help me, how should I bypass vocal effects using midi? Thank you in advance

    read more...
    0 164
    • nkrcompany
      PetGerbil Can you activate the Tuner from Midi ? That would bypass the Vocal effects.
      • September 17, 2020
      • Voicelive 3 Extreme bypass via Midi
        nkrcompany No, I can't because I don't know the midi CC of the tuner either. In the manual the midi cc list is too lightweight.
        • September 17, 2020
      • Voicelive 3 Extreme bypass via Midi
        PetGerbil Hmmm, The only other way I can think of is to maybe create a "Step" with all the fx off. Or,individually turn each effect off with seperate CC's. P.I.T.A either way. :/
        • September 17, 2020
  • ChrisF
    Contributor - Level 2
    2020-09-14

    How can I direct backing tracks to go out on a particular output, say on one of the 1/4" guitar jack outputs?

    0 128
  • Aspur
    Newcomer - Level 2
    2020-09-12

    I seem to be having issues with the harmonies.  No matter where I set the slider harmony level, the harmonies are way in the background and barely audible.  I cannot hear them.  It doesn't matter was present I'm on.  I cannot find anything in the manual that addresses this type of trouble shooting.   What has happened. 

    read more...
    0 73
    • Aspur
      kiskadar69 1.Check the value of the "Harmony" parameter on the "FX Mix" page (see VoiceLive Touch 2 Reference Manual on page 4).

      2.Check the value of the "Level" parameter on the "Harmony Effect" page (see VoiceLive Touch 2 Reference Manual on page 15).

      3.Check the value of the "Level" parameters on the "Voice Edit" pages (see VoiceLive Touch 2 Reference Manual on page 18)

      4. (Hint) If you amplify the vocals in mono, set the VoiceLive Touch 2 to "Mono" or "Dual Mono" mode (see VoiceLive Touch 2 Reference Manual on page 59).
      • September 13, 2020
  • Npsonic
    Newcomer - Level 1
    2020-09-12

     I have had the vl3x now for 3 days... and no matter what I do I cant get my guitar to go through the pedal with effects.. there is just no output... I'm pretty sure I'm missing something.

     

    I know the pedal has input from the guitar because the level gauge and the tuner work..and I've even heard the effects through headphones on loop playback but I cant get guitar through the output to the mixer...

     

    Can anybody help its baffling me....

    read more...
    0 111
    • Npsonic
      PetGerbil Have you got the guitar plugged into the right hole ? The bottom one,not the top,cos that one'll mute the signal. What have you got your output settings set to ? Can't remember which one,but one will mute the signal. Have you looked in the Mixer section(Twiddle one of the 4 mini knobs to bring it up) Nothing amiss there ? Have you got something plugged into the seperate guitar outputs, Cos that will mute the guitar from the main outputs.
      • September 12, 2020
    • Npsonic
      Npsonic I have infact now got to the bottom of it.... the thru guitar jack sensor had a fault and was constantly picking up a jack in there hence no guitar output through the pedal..... I wsdnt going mad after all!!! Thabks for the reply guys
      • September 13, 2020
      • No guitar output vlx3
        PetGerbil That was gonna be my next suggestion..."Are you going mad ?" heh.
        • September 13, 2020
Go to page