Statistics

254,618 members
132,321 posts
  • romainr
    Newcomer - Level 1
    2020-09-14
    Hello,
    I just bought an xtouch controller, everything works but the faders do not line up. When starting LogicPro, some go to 0, and others go to -10db (while the software is indeed at 0). Is there a software or a manipulation that allows to calibrate them?
    thank you in advance
    read more...
    0 460
  • Thierry91
    Newcomer - Level 1
    2020-09-01

    Hello, X-Touch how such a beautiful machine is not an editor? I'm looking for a way to map keys for cubase 10.5 so if you have any ideas i'm okay, because currently i have 73 keys out of 92 working. X-Touch on cubase 10.5 and Windows 10, I am in Mackie Controle USB mode, thank you for your help.

    read more...
    0 182
    • Thierry91
      DaveMorrison The X-Touch has no programmability (aside from the different modes). The only place you can change a function is within the DAW. Look at how you can customize controls form within Cubase.
      • September 1, 2020
    • Thierry91
      Thierry91 It's a shame such a beautiful device not to be able to fully exploit it. I also wanted to take the X-touch Extender so I'm afraid it won't work and I can't do anything? And we can find someone to update the sysex for cubase on windows even paying? I programmed the keys with the generic periphery but it's the same with the button that works, no problem but the others don't work, not recognized.
      • September 2, 2020
      • X-touch
        DaveMorrison The X-Touch works very well with some software. Logic Pro X can use every button on the X-Touch and all the modifier keys. Cubase still has good support. Have you looked as custom shortcut keys within Cubase to. provide additional functionality?
        I also have and extender. It works well with Logic and is nearly useless when controlling my X32 mixer.
        • September 2, 2020
      • X-touch
        Thierry91 Yes I tried a manual manipulation in generic perephiric, but the key which does not work, it answers unknown. moreover when I do this the button does not light up anymore. I have no x32 unfortunately lack of space. That's why I would like to know if the extender will work.
        • September 2, 2020
    • Thierry91
      Thierry91 Sorry for my English, I take google translate because I speak French
      • September 2, 2020
    • Thierry91
      Thierry91 Shéma graphique
      • September 2, 2020
    • Thierry91
      DaveMorrison There are forum members who make vinyl overlays for the X-Touch so that the button label will match the button function. A search for "x-touch overlay" will reveal several good results.
      • September 2, 2020
      • X-touch
        Thierry91 Yes cool but the buttons that don't work will be useless. I tested on Studio One so other buttons work and no other lol. I wonder if this is not from Cubase. So I deduce that it must be possible to improve it.
        • 1
        • ·
        • September 2, 2020
  • rd3d2
    Newcomer - Level 1
    2020-08-28

    Couple of questions for anyone here who might know:
    1. Can I add an Extender to the X-Touch One?

    2. Can I add an X-Touch Compact to the X-Touch One?

    Do these two scenarios make sense given my starting point is an X-Touch one (and it looks as though I can get a compact for less than the cost of an extender although appreciate that I would lose the Scribble LCDs it looks like I would gain in additional controller knobs on the Compact?)

    Thanks!

     

    read more...
    0 65
    • rd3d2
      PedroRodrigues Hi rd3d2 Please the X-TOUCH EXTENDER is designed as an extension of X-TOUCH, no other model.

      The X-TOUCH ONE is designed to be used alone (in a small setup studio but actually can be used it with Extenders, you just need to set the XT1 with a channel offset of 8 in your DAW.
      • September 2, 2020
  • DaveUricek
    Contributor - Level 2
    2020-08-19

    Hello all.

     

    I have a situation that is driving me crazy that I cannot solve. When I’m mixing in Reaper 5.? while using my Behringer X-Touch and Behringer XR-18 to control faders, record, pause etc. Every time I hit stop or move the cursor my X-Touch goes back to the 1st bank of 8 faders. So if I’m working on tracks 17-24 and I move the cursor my X-Touch goes back to the first 8. I have tried to search the forums here and at Cockos with no luck. Any clues would be greatly appreciated

    read more...
    0 53
    • DaveUricek
      NicJonesMT Hi Dave. Could you please confirm the following;
      Have you tested this in an alternative DAW and do you get the same behaviour?
      What FW are you using on the X-Touch?
      Are you using a Windows or Apple System?
      Could you please confirm the precise OS?
      Are you connecting to any Docks or using any external adapters?
      Can you send me some screen shots of exactly how the X touch is configured in Reaper?
      • August 19, 2020
  • Brandoe1107
    Newcomer - Level 1
    2020-08-13

    My Behringer X touch control surface won't even show up on my computer it was working just fine 

    0 64
    • Brandoe1107
      Brandoe1107 Help me fix it please
      • August 13, 2020
    • Brandoe1107
      WilliamR Hello, Can you create a care ticket from the support tab above so we can troubleshoot this for you?
      • August 13, 2020
    • Brandoe1107
      Brandoe1107 I did so
      • August 13, 2020
    • Brandoe1107
      Brandoe1107 Case number in the picture
      • August 13, 2020
  • bucknodules
    Newcomer - Level 1
    2020-08-11

    Does anyone know how to change the X-Touch One's shuttle wheel resolution? I'm using Studio One but I'm guessing changing resolution is similar for all DAWs. It's default is a 1 bar increment. I'm guessing there has to be a way to easily (besides changing the sysex message) increment length to 1/4 note, 1/8 note, seconds, etc.

    Thank you for your help...

    read more...
    0 65
    • bucknodules
      DavidKnighton Hi bucknodules. I would suspect this setting would be within Studio One, as the controller is simply spitting out messages, and the DAW is translating those messages. I would double up and check the Presonus forums to see if this has already been answered on their site. This link seems to have some guidance on the topic.

      https://forums.presonus.com/viewtopic.php?t=21678&p=118856
      • August 12, 2020
  • BrokeHustlerz
    Newcomer - Level 1
    2020-07-16
    cant find editing software
    0 62
  • Jjude
    Newcomer - Level 1
    2020-07-06
    I have been using the X-Touch one with ProTools 2019.10 for over a year and it has been flawless... Some report it can be buggy with ProTools but thats not been the issue... I am using a Firewire Apollo Quad 8 which has its own console and everything started when I started up my PC this morning... I am using Windows 10 Version 1809 because Version 1903 & 1909 are causing all kinds of Audio issues but not for all.... I can hit the spacebar on my PC and the X-Touch will follow but the Bars & Beats numbers are jumping 15 at a time... The console for the Apollo is only used during recording not for mixdown so it is not being used... I have chased this all day , even did a system restore on my PC , which is a Sweetwater Creation Station CS-450 top of the line... Thanks for any help????
    read more...
    0 83
  • Seta666
    Contributor - Level 1
    2020-07-02
    Hello, I am using X-Touch with FW1.15 in Ableton live Suite 10, most of the time it works just fine, however there is some buggy behaviour. 1- Sometimes when I create a new track between tracks (Eg New track between Track 1 and 2) X-touch messes up, it is like it does not update the info correctly. For example new track would become track 2 and old track 2 would become track 3 but the controller still identifies new track 2 as old track 2. Saving and closing the project and reopening fixes this behaviour 2- Also sometime yo try to arm a track but the button does not light up (you can see it light up in ableton), deleting the track and undoing fixes this Anyone getting same behaviour?
    read more...
    0 67
  • PatrickCorrigan
    Contributor - Level 1
    2020-06-30
    The documentation shows that USB is supported in this mode. If I select MC mode I do have the USB option, and I can connect to my DAW in that mode. If I select Xctl/MC mode I only have Network and MIDI options and cannot connect to my DAW via USB. Does anyone know how to fix this? Thanks.
    read more...
    0 584
    • PatrickCorrigan
      DaveMorrison In Xctl/MC Mode, The DAW is alway connected by USB; thus, there is no choice. The Xctl section has the choice of Network or MIDI DIN to connect to the mixer.
      • June 30, 2020
      • X-Touch No USB option in Xctl/MC Mode
        PatrickCorrigan MC is how I'm connecting to the DAW over USB. Xctl connects to my XR18. As I said, if I select MC only, I have a USB option, which connects to my DAW. If I select Xctl/MC, I only have Network and MIDI options, and I cannot communicate with my DAW via USB.
        • June 30, 2020
    • PatrickCorrigan
      DaveMorrison I under standyour connection scheme and it is correct. If the system is working correctly in Xctl/MC mode, your DAW is supposed to connect using MC protocol over USB. The transport buttons will control the DAW and the faders change depending on SMPTE/beats button. If it's not working, something is wrong with your X-Touch.
      When you're in Xctl/MC mode can your computer see the USB device (you can check in "system report")?
      • June 30, 2020
    • PatrickCorrigan
      ChrisJanton Have you pressed the "SMPTE/BEATS" button on the right of the display? That switches from XCTL to MCU
      • July 17, 2020
Go to page