Statistics

208,451 members
80,650 posts
  • New
    JohnMathew
    Newcomer - Level 1
    2021-01-05

    I have been trying to register my Behringer V-Tone Bass Driver DI BD121 with this site as recommended on the product instruction pamplet.

    Done evrything required here but dont see how to register my product. HELP ????

    0 10
    • JohnMathew
      Nigel67 Hi John, sorry about the issues that you are experiencing registering your product. Can you tell me how far into the process you get before you receive the error message or are unable to get any further. Can I just confirm that you are going to the support tab at the top of this page and then on the new page that opens, scrolling down and clicking on the tab Product Registration. Let me know where the process falls over and I will help you further. many thanks
      • Jan 4
  • New
    belfie13
    Newcomer - Level 1
    2020-12-31

    I've heard alot about the issues with Marshalls Mode Four MF350, where something to do with grounding destroys the amp..

    i'm not sure technically what this means but I want to know if this has anything to do with the ground lift and do i use it or not. is there any other issues with using the MF350 Emulated Line Out through the DI4000 to my mixing desk?

     

    specs. i think are relevant?

    MF350 Emulated Line out:

    level: -10dBV | recommends connecting to inputs of impedance >20㏀

     

    PreSonus StudioLive 16.4.2

    Line Inputs:-

    Input Impedance: 10 kΩ
    Maximum Input level (unity gain): +22 dBu

     

    read more...
    0 6
  • New
    wojtashek
    Newcomer - Level 1
    2020-12-02

    I need connect mixer through Radial Catapult to another mixer nd connect to mic input. According to Radial Engeeniring I as I use RX4M as output all signal should be Mic Level.

    Is this DI Box Behringer DI100 Ultra-DI will transform Line Level Signal from mixer to Mic Level (as attenuation is +48dBu)? If not would you recomend abother one?

    read more...
    0 4
    • wojtashek
      Paul_Vannatto Hi Wojciech, the DI100 will change the line level input signal to mic level. The issue might be powering the DI100. Phantom power can be applied to the XLR-M output, but not to the XLR-F input. That would mean that the phantom would have to come from the second mixer via the Catapult. The question is whether Radial's design allows phantom to pass through the Catapult. If it doesn't, the other solution is a 9V battery (not ideal).

      An alternative option would be the Behringer Shark FBQ100. It uses a separate power supply and can be configured for line input and mic output (see page 5 in the manual).
      • December 2, 2020
    • wojtashek
      wojtashek Thank you for your help. Phantom power is coming through Radial Catapult TX4 where is connect FOH mixer. Thus should supply the power to DI Box. If not I will take your advise Thank you
      • December 2, 2020
  • New
    SeriusNtentions
    Newcomer - Level 1
    2020-11-26

    Hello Folks,

    Has anyone tried Reamping with a DI Box by using it in Reverse?

    1. You take a 1/4" balanced TRS cable out from any output of the UR-44 and insert it into rear panel of your DI Box Output via an XLR Female to 1/4" female. (Mine is a Behringer DI-100.
    2. Then on the Front of the DI Box connect a 1/4" TRS balanced cable from the Input to the input of the first pedal in the pedal chain.
    3. Then a TS unbalanced cable from output of the last pedal in your pedal chain into a Hi-Z input on the UR-44 (1 or 2) ?

    https://mediadl.musictribe.com/media/PLM/data//images/products/P0062/515Wx515H/DI100_P0062_Other1_B.png
    https://mediadl.musictribe.com/media/PLM/data//images/products/P0062/515Wx515H/DI100_P0062_Other1_B.png
    https://mediadl.musictribe.com/media/sys_master/h4c/h48/8850060607518.pdf

    read more...
    0 20
  • New
    KennyBarnes
    Contributor - Level 1
    2020-11-14

    Hi, will the 8200 accept a digital input from a Sony CDSA player and divide it into 5.1 analogue outputs please? 

    0 7
    • KennyBarnes
      Paul_Vannatto Hi Kenny, the ADA8200 digital input is an 8 channel ADAT and can output to the 8 output channels. Does the Sony player output this digital signal?
      • November 14, 2020
  • markmojo62
    Newcomer - Level 1
    2020-07-08
    Hi, is it possible to get a set of replacement control knobs for the BDI21?
    0 33
    • markmojo62
      WilliamR Hello, Please create a care ticket in the support link above and we can help you out with that.
      • July 8, 2020
  • tangosynthesis
    Contributor - Level 3
    2020-03-03

    Morning all,

    This section of the site seems a little... empty ... compared to other places so I'm not expecting anyone to spot this any time soon. My question though is this...

    The DI800 says it can be phantom powered or mains powered, but the manual is a little thin on how this works in practice. Does giving it phantom power just power individual channels, or does phantom on one line give power to all eight?

    And having done that, what happens if you have the mains plugged in and accidentally add phantom on one or more channels as well? Does it ignore it? Or do you then call the fire brigade?

    I'd try it myself but it's going to take a little while to have the space to set it up, and that may end up being at the next gig rather than on the test bench.

    Anyway, cheers as always.

    G

    read more...
    0 116
    • tangosynthesis
      RexBeckett

      @tangosynthesis 


      You were wrong, Graham, your post did get spotted.


       


      You were right about the DI800 user manual, though. It does a masterly job of failing to explain how the phantom powering works. Based on experience with other active DI boxes, I can guess a few things:


       


      Each channel is separate (apart from the shared mains power supply). If you want to use phantom powering, each channel would need phantom power from the mixer/console.


       


      I think it is very unlikely that there would be a problem if you accidentally supplied phantom power to one or more channels while the mains power was turned on. Phantom power is limited to low currents so doesn't readily produce smoke. I suspect it would effectively be ignored.

      • March 2, 2020
  • DanielGrenier
    Contributor - Level 2
    2019-10-22
    0 150