Statistics

293,684 members
176,706 posts
  • New
    DanTheMan05
    Newcomer - Level 1
    2022-06-13

    Good evening--

    I purchased a DI800 active DI rack unit a few years back...have great service from it.  I'm going to build another separate rack and use a similar setup.  Looking to confirm model number of what I'd purchased a few years ago (Aug '19), I found the DI800 has been replaced with a "v2" (version 2).  Can anyone tell me what the difference between the two is?  I'm apparently overlooking the info...  Behringer website doesn't seven show a "v2" variety of this product....at least not one that I can find.

    Thanks in advance--

    Dan

    read more...
    0 9
    • DanTheMan05
      Nigel67 Hi DanTheMan05. I have spoken to the Design Team and the V2 was released due to updates that were required because of compliance changes. There is no change in the audio quality between the V1 and V2 nor any additional features. Hope this answers your question. All the best.
      • Jun 13
  • New
    Spencerj
    Newcomer - Level 1
    2022-02-14

    I bought a Behringer Ultra-G di box in September 2021 and it has now stopped working. I want to return it for a replacement or repair. I am sure it must be within the warranty period as it is only 5 months old

    0 13
    • Spencerj
      Nigel67 Hi Spencerj. Please contact our partner that you purchased the unit from originally and they will be able to arrange a warranty repair for your DI Box. Many thanks
      • Feb 14
  • New
    Rickjones11
    Newcomer - Level 1
    2022-01-25
    Hi,
     
    How're you doing?
     
    Valuehub4u is interested in carrying your products in our store and on our website. Can you please break down your wholesale pricing and procedure for me to further the process? I'll appreciate it. If your MOQ is more than 1500$ please send us in the right direction. 
    Thanks.
     
    Looking forward to hearing from you.

    Rick Jones - Procurement Manager​

    Kind regards,

    Nick Jones 
    Procurement Manager at Webcom Industries  P 

    858 879 0760

     W www.valuehub4u.comE [email protected]7154 sitio bahía Carlsbad, California  92009
    read more...
    0 27
    • Rickjones11
      Nigel67 Hi Rickjones11. Thank you for your interest in becoming a partner. Please e-mail [email protected]  and include your company profile. A colleague will then get back to you with the relevant details. Many thanks
      • Jan 25
  • New
    sachin1
    Newcomer - Level 1
    2021-07-27

    GDI21 produces noise when using high gain channel...it's ok with Tweed and clean setting...

    0 70
    • sachin1
      Dale_M Sorry to hear this, please go to the support tab above and select Technical for us to assist you.
      • July 27, 2021
    • sachin1
      sachin1

      i have already generated a ticket.....

      • July 27, 2021
      • GDI21 produces noise when using high gain channel...it's ok with clean and Tweed amp setting
        Dale_M Do you have a case number?
        • July 30, 2021
      • GDI21 produces noise when using high gain channel...it's ok with clean and Tweed amp setting
        sachin1 CRM:0120000201678
        • Jan 18
  • New
    Drew33kap
    Newcomer - Level 1
    2021-07-14

    I am not getting output to my amp. Full function to headphones, but no output to amp. Is this just a setting?

    0 45
    • Drew33kap
      Kathryn34 Are you running vocals through the guitar out? If so, that doesn't work with this pedal because it is both a vocal and guitar processor and the two signals are separated in the VL3X.
      • July 14, 2021
  • New
    kyostal
    Newcomer - Level 1
    2021-04-19

    Hi MusicTribe community ?
    Hope you are doing well ?

    Is there somebody who already used the D.I.4800 A ?

    I would like to use it in studio as a splitter and I would like to know if it's allow mic input signal ?

    Thank you for your aswer. 

    read more...
    0 103
    • kyostal
      RexBeckett Hi kyostal, the DI4800A is not ideal for use as a mic splitter. It would be better to use an Ultralink MS8000 which is designed for this application.
      • April 19, 2021
      • Behringer DI4800 A
        kyostal Thank you for your aswer. I did not see this product It will be perfect.
        • April 19, 2021
  • New
    JohnMathew
    Newcomer - Level 1
    2021-01-05

    I have been trying to register my Behringer V-Tone Bass Driver DI BD121 with this site as recommended on the product instruction pamplet.

    Done evrything required here but dont see how to register my product. HELP ????

    0 84
    • JohnMathew
      Nigel67 Hi John, sorry about the issues that you are experiencing registering your product. Can you tell me how far into the process you get before you receive the error message or are unable to get any further. Can I just confirm that you are going to the support tab at the top of this page and then on the new page that opens, scrolling down and clicking on the tab Product Registration. Let me know where the process falls over and I will help you further. many thanks
      • January 4, 2021
  • New
    belfie13
    Newcomer - Level 1
    2020-12-31

    I've heard alot about the issues with Marshalls Mode Four MF350, where something to do with grounding destroys the amp..

    i'm not sure technically what this means but I want to know if this has anything to do with the ground lift and do i use it or not. is there any other issues with using the MF350 Emulated Line Out through the DI4000 to my mixing desk?

     

    specs. i think are relevant?

    MF350 Emulated Line out:

    level: -10dBV | recommends connecting to inputs of impedance >20㏀

     

    PreSonus StudioLive 16.4.2

    Line Inputs:-

    Input Impedance: 10 kΩ
    Maximum Input level (unity gain): +22 dBu

     

    read more...
    0 62
  • New
    wojtashek
    Newcomer - Level 1
    2020-12-02

    I need connect mixer through Radial Catapult to another mixer nd connect to mic input. According to Radial Engeeniring I as I use RX4M as output all signal should be Mic Level.

    Is this DI Box Behringer DI100 Ultra-DI will transform Line Level Signal from mixer to Mic Level (as attenuation is +48dBu)? If not would you recomend abother one?

    read more...
    0 131
    • wojtashek
      Paul_Vannatto Hi Wojciech, the DI100 will change the line level input signal to mic level. The issue might be powering the DI100. Phantom power can be applied to the XLR-M output, but not to the XLR-F input. That would mean that the phantom would have to come from the second mixer via the Catapult. The question is whether Radial's design allows phantom to pass through the Catapult. If it doesn't, the other solution is a 9V battery (not ideal).

      An alternative option would be the Behringer Shark FBQ100. It uses a separate power supply and can be configured for line input and mic output (see page 5 in the manual).
      • December 2, 2020
    • wojtashek
      wojtashek Thank you for your help. Phantom power is coming through Radial Catapult TX4 where is connect FOH mixer. Thus should supply the power to DI Box. If not I will take your advise Thank you
      • December 2, 2020
  • New
    SeriusNtentions
    Newcomer - Level 1
    2020-11-26

    Hello Folks,

    Has anyone tried Reamping with a DI Box by using it in Reverse?

    1. You take a 1/4" balanced TRS cable out from any output of the UR-44 and insert it into rear panel of your DI Box Output via an XLR Female to 1/4" female. (Mine is a Behringer DI-100.
    2. Then on the Front of the DI Box connect a 1/4" TRS balanced cable from the Input to the input of the first pedal in the pedal chain.
    3. Then a TS unbalanced cable from output of the last pedal in your pedal chain into a Hi-Z input on the UR-44 (1 or 2) ?

    https://mediadl.musictribe.com/media/PLM/data//images/products/P0062/515Wx515H/DI100_P0062_Other1_B.png
    https://mediadl.musictribe.com/media/PLM/data//images/products/P0062/515Wx515H/DI100_P0062_Other1_B.png
    https://mediadl.musictribe.com/media/sys_master/h4c/h48/8850060607518.pdf

    read more...
    0 226
Go to page