Statistics

259,790 members
138,208 posts
  • New
    Chewychunga
    Newcomer - Level 1
    2021-11-23

    I just bought a go xlr and have since noticed that i have to use the built in headphone jack to be able to listen to it

    i was looking for the specifications of the build in DAC so I can compare it to my schitt DAC I already own

    also wondering there is any way to allow / support multiple headphone outputs

    i commonly switch between my headphones when streaming on pc and my oculus when streaming VR 

    And final question is I have a stereo mic and was wondering if there is any way to support this feature 

    read more...
    0 9
    • Chewychunga
      PedroRodrigues Hi Chewychunga, thank you for your post, the only information available to end user is the one present on the product page as we do not provide any other specs. Unfortunately the unit will not allow you to have two different signals on the Headphones output. When it comes to the Mic input the GOXLR, the unit only supports a mono input. Thank you
      • Wed at 12:18 AM
  • New
    YiannisS
    Newcomer - Level 1
    2021-11-01

    Hello all,

    I have a VoiceLive Play GTX and I am facing the following problem.

    When I connect my guitar with my DAW, it keeps the effects applied by the GTX. There is no option to turn them off.

    Is there any way to bypass the guitar effects?

     

    Thank you

    read more...
    0 7
    • YiannisS
      kiskadar69 If you plug a cable into the INST THRU, the guitar sound will appear here (without effects) and the guitar will not be heard on the XLR outputs.
      • Nov 1
    • YiannisS
      PedroRodrigues Hi YiannisS, thank you for your post. there are 3 output settings VoiceLive Play GTX
      STEREO – XLR outputs receive a stereo mix of all voices, guitar and other inputs.
      MONO – A MONO full-mix signal is on the LEFT and a DRY vocal is on the RIGHT. Any Tone and Pitch Cor Amt settings from the Setup menu are included on the RIGHT DRY channel.
      DUAL MONO – All lead and effected vocals are sent via the LEFT output and all guitar, aux/ digital signals are sent via the RIGHT output. Loops are passed in Stereo.
      Regarding what you have mentioned I agree with what kiskadar69 mentioned and to pass guitar signals to an
      amplifier and bypass internal guitar processing, connect a 1/4” cable to your guitar rig from the INST/ THRU
      jack.
      • Nov 2
    • YiannisS
      YiannisS

      Thank you very much for your replies and your time lads. Very helpful, indeed. I will go with your common suggestion, through an amp and the INST/ THRU jack. Works nce. Take care...

      • Nov 2
  • New
    RaynaldoMartine
    Contributor - Level 1
    2021-10-09

    I have racked my brain trying to create a reasonable phase shifter in my Voice Live 3 Extreme. I change all of the parameters in the flanger, but it never gets close enough to use on the gig. Some of the other users posted a few ideas to try but no luck. PLEASE! Does someone have a workable solution?

    Also, TC Helicon staff, 1) could we please get this as a firmware upgrade?

                                    2) Get JUST Aux, and guitar for looping? (No vox). This way, we can create a soloing track while we sing?

                                         I'm using my aux for the drums I play with my foot.

                                          https://youtu.be/63qJ7P0TVwo

    read more...
    0 18
    • RaynaldoMartine
      PedroRodrigues Hi RaynaldoMartine, thank you for your post, please consider that the VOICELIVE 3 offers an Inverse Phase effect but not a phase shift, a phase inversion is neither a time shift nor a phase shift, but simply a swap of plus and minus.
      The phaser and flanger create very similar sounds and can be used interchangeably, the flanger can sound more extreme than a phaser, so phasers can be used when more nuance is needed.
      Often confused due to their similarity, these processors all incorporate phase shifting in different ways.
      To set up the flanger on your unit please see the images below.

      To help you on your creative direction it may be useful to follow the link below:
      https://producelikeapro.com/blog/flanger-vs-phaser/

      When it comes the Firmware upgrade for your unit please consider that all the firmware are accessible via VOICESUPPORT 2.
      When it comes to new features on this unit please take in to account that this unit has been replaced by the VOICELIVE 3 EXTREME therefore we will not perform any more development on the VOICELIVE 3.

      Thank you
      • Oct 13
    • RaynaldoMartine
      RaynaldoMartine

      Hi Pedro. Thank you for your detailed (and helpful) response. 1st: The image you told me to refer to, was an image of a dog eating a cupcake. Pretty sure that was a mistake. LOL! 2nd: I actually own 3 Voicelive Extremes (I play 6 nights a week, and I 've had to send two of the units back to Sweetwater for repairs at different times, but always need one for the gig, and a spare in the truck for backup. As a VL3 owner, I would like to still make my request for the firmware upgrade?


      Get JUST Aux, and guitar for looping? (No vox). This way, we can create a soloing track while we sing?


      I'm using my aux for the drums I play with my foot.


      https://youtu.be/63qJ7P0TVwo

      • Oct 13
  • New
    AshleyKitson
    Newcomer - Level 1
    2021-10-01

    I've had my VL3 a year or so now.  As far as voice goes it's brilliant.  However, I play 3 acoustic instruments in a live gig: 6 string, 12 string and a bazouki. I've figured out I need an off board input controller to adjust the input signals from three into the VL3. Now I just need to be able to step on the program pedal and know that all the basic tone, reverb etc is correct for the instrument I am playing. I Can get it right for one. How do I get it right for all three.

    read more...
    0 9
    • AshleyKitson
      PedroRodrigues Hi AshleyKitson, thank you for your post, and I'm sorry for the late reply.
      When you use an off-board input controller you will most certainly be feeding one signal at a time on to the VOICELIVE 3 and I believe that you would be able to set up a configuration for each instrument and trigger that configuration when you are playing any of the 3 instrument, this will be by setting up PRESETS on the VL3 for each instrument.
      Essentially, a Preset is a record of all the settings for a group of effects that you can recall quickly and easily and extremely flexible.
      A Preset can be general purpose like a simple Reverb or Harmony sound or can also represent a specific song or portion of a song via multiple effects and settings.
      To be honest not sure how this would work specifically when it comes to change the instrument on the input controller side but on the VL3 if you store a Preset you can recall that full present at any time
      If your set up a Preset for each instrument and change the instrument on the input controller and then trigger the preset stored for that specific instrument it might work.
      I will leave you below a link for the full manual where on Page 44 and forward you will be able to access more information on Presets and on page 54 for Remapping a footswitch
      https://www.tc-helicon.com/tchelicon/product?modelCode=P0CDY
      I will also leave you below the full video collection for the VL3
      https://www.youtube.com/watch?v=eSlom0UbQTA&list=PLR6Yp1ynH1xfklKn1W2KXRUvm10F7qbI0

      I hope this helps.
      • Nov 3
  • New
    KennethKohncke
    Contributor - Level 2
    2021-09-27

    Hi TC Helicon Developers,

    I have been using the Play Acoustic for quite a few years now and am finding I have need of more from it.

    Here is the challenge I put to you. Come up with a new, closer to fully digital version of the PA.

    The problem I have is trying to adjust settings from behind the mic, guitar and PA. I need to be able to hear what the audience is going to hear to make those adjustments confidently. So what I envisage is the PA being able to connect wirelessly to either a phone or tablet (android), or laptop or tablet, (windows). So I can record myself on the looper, then go out into the venue connected to the tablet and be able to make all the changes to settings there. I would like the settings to be more advanced and more user friendly like the way they are generally displayed and adjusted in a daw. In paticular EQ, Comp, Gate.

    Would be awesome if you could build it!

    Does anyone know of anything like this already on the market?

    Cheers, Ken.

    read more...
    0 15
    • KennethKohncke
      PedroRodrigues Hi KennethKohncke thank you for your post, it sound like a very cool idea I will forward your proposal to the Dev. Team . Thank you
      • Sep 28
  • New
    Rob13
    Newcomer - Level 1
    2021-09-21

    Just purchased the Tc helicon voicelive 3 extreme. There is no amazing grace preset as described in the manual. Anybody got any ideas? 

    0 9
  • New
    IanSheppard
    Newcomer - Level 1
    2021-09-07

    Hi, 

    I have a musician fulfilling multiple roles on a tour, including BVs. He chose the Voicetone Harmony to use a standalone device, without using the guitar input. 

    My issue is this: the FOH guy insists on taking a dry vocal, previous to the Voicetone (a Y-split cable is used to achieve this). When the fx are bypassed, we still get a perceptible doubling effect in the monitors and PA, as the unaffected thru seems to be delayed a tiny amount, presumably by latent processing. I have also tried using the 'DRY/WET' out function of the pedal, and this issue persists. 

     

    Any ideas? TIA.

    read more...
    0 12
    • IanSheppard
      PedroRodrigues Hi, IanSheppard in this case the only suggestion that I can provide is to set up the DRY/WET' out function that you mention but, in this case, please confirm that you have set up the unit as stated below.
      Please leave the level balancing between your dry voice, Tone active only and a mono signal of the Harmony, Double and FX to your FOH engineer, by ensuring that the Stereo LED is not lit, and that the Harmony knob is set to full right.
      Please connect the outputs to two channels of your audio mixer. The Left (Mono) output will send the “wet” effects and the Right (Dry) output will send your dry voice, allowing this to be adjusted by your FOH engineer.
      • Sep 7
  • New
    Rocker4ever
    Newcomer - Level 1
    2021-09-06

    I am trying to use an Alesis SR-16 MIDI time output for the looper tempo. When I connect it, the signal eventually goes out of time. The loops fall out of sync with the drums. I believe there is a firmware update for this. My voice live 3 is not connecting using Voice support 2. Can anyone help?

    read more...
    0 7
  • New
    joan3457
    Newcomer - Level 1
    2021-09-04

    Hola alguien puede ayudarme. he instalado la version firmware reciente 2.2.00 Build 366

    Estando en vocal, me ha canviado los colores de el boton pulsador (Hold Ford , Looper) a un color violeta , e igual que el boton pulasador (Step)

    a mas cuando aprieto el botón pulsador  para (Looper)se pone en rojo ,antes de cambiar actualización se ponia en violeta. el rojo es para cuando tienes la guitarra ,

    gracias 

    read more...
    0 13
    • joan3457
      PedroRodrigues Hola joan3457 tenga en cuenta que los LED del VL3X se vuelven ROJOS, lo que indica que ahora está en la capa de guitarra. Cuando mira la pantalla, verás que los nombres de los efectos han cambiado, y hay un pequeño ícono de guitarra en cada uno de los cuadros, hay pequeños íconos de micrófono en cada cuadro de Vocal Layer box. Para volver a la capa vocal, debe presionar Inicio, cuando esté en la capa de guitarra, indicado por LED rojos, presione el botón Layer hasta que la capa vocal esté activa.
      • Sep 6
  • New
    Cantara123
    Newcomer - Level 1
    2021-09-01

    Hi can anyone help me with getting my voice live play pedal repaired. The XLR microphone input is not registering any signal. Tried new leads and different mics. I think its a fault. Its worked fine up to now. Any ideas. I think it needs sending somewhere.

    read more...
    0 20
Go to page