299,155 members
182,868 posts
  • New
    Newcomer - Level 1


    Talk box synth has crackling that comes and goes when using with an electrovoice mic.....and is fine when i use a shure.  Sometimes when the crackling happens the talkbox switch indicator flickers and lights up for a moment.  Swapped out all of my cables and is still an issue.

    0 69
  • New
    Contributor - Level 2

    I have a VoiceLive3 Extereme I was trying to use USB port for MIDI as this is an option. Has anyone used a 3rd party adapter to accomplish something similar? I just purchased a Bluettooth MIDI adapter but I could not find one in USB form factor. I was curious to know if anyone in community has been successful in locating and using a Bluetooth USB adapter with VL3X? I'm just using this with SetList Maker to control backing tracks, song selection, etc. 

    0 67
  • New
    Contributor - Level 2

    I'm using a VoiceLive 3 with the external TC Helicon switch 6. II'm absolutely desperate to find out if I can set one of the buttons to play and overdub or if I'm still stuck with play then waiting for it to loop around again to record. The Switch 6 is preferable to using the pedal itself for a number of reasons to do with the performer (not me). I'm looping up to 16 bars so waiting for it to come around again just isn't an option.

    The last time I tried to do this I found that the Switch 6 couldn't be set up this way but there were rumours that TC Helicon were going to fix it. Has this happened or am I out of luck?

    Any help or suggestions would be greatly appreciated.

    0 71
  • New
    Newcomer - Level 1

    Hi I have a vlx3 but I'm having problem with beat pedal through loop. I plug beat into aux input, problem I'm having is once I've recorded beat I play it back and the beat is playing soft through loop how do I fix this. I have my beat pedal turned up I've even gone into settings under main screen turned things up and it's still too soft playing back.

    0 72
  • New
    Contributor - Level 1

    Hello Community,

    great i found, at least, YOU. My question is: am i stupid? I can´t find the software to connect my two devices. I bought new, but quite a long while ago. (was ill for a very long time) I´d like to start using these devices and this software was still installed in an older Laptop of mine.

    Please, please can anybody help me what to do? I still spent many hours without success, so the main question remains: am I stupid?



    0 80
  • New
    Triber Contributor

    Hi friends! We are very excited to anounce GoXLR update 1.3.130.



    Color Wheel

    • Allows for unlimited choices to fully customize the look of your GoXLR.
    • Recently selected colors are saved to make setting up your color profile faster and easier.

    Cough Mute

    • Cough Mute now has its own dedicated mute options.
    • Mute behavior can be set to Hold or Toggle modes.
    • Mic no longer needs to be assigned to a dedicated fader, thus freeing up a fader to mix another audio source.

    Line Out fader

    • The line out level can now be controlled by the application and can be assigned to a physical fader.

    System Tray / Minimized on Startup

    • GoXLR app can now be set to be hidden in Windows System Tray on startup.

    Quality of Life Improvements and Bug Fixes

    • Double click an individual band on the EQ to reset gain to 0dB.
    • Reset button now also resets EQ bands to a gain of 0dB.
    • Right-click on device component in app to enter the lighting tab for that component. A left-click will bring you to the settings tab for that component.
      Mic, Chat and Music are now select-able on all channels for Mini.
    • Global settings now contains a checkbox to select whether muting Voice Chat also mutes your Mic channel.
    • Headphone and Lineout should now properly display audio passing when set to meter mode.
    • Profile mute mode and EQ settings now load correctly on start-up.
    • With Line Out or Headphones as the channel source, Mute to All is the only select-able option.
    • Adjusting the mid and high EQ bands on Mini in basic and advanced modes did not have reliable behaviour. This has been corrected but this may have changed your profile EQ settings slightly.
    • Better error checking on updates.
    1 413
  • New
    Newcomer - Level 1

    Hello, my play acoustic turn know wheel will not move any parameters, it even feels more loose than ever. Is it repairable? I can't be withou5 it due to scheduled gig, can parts be ordered for hom3 repair? 

    0 61
  • New
    Newcomer - Level 1

    Mostly just a curiosity but can anyone tell me if the audio that comes into the aux input remains analog on its way to the headphone output?

    if it doesn't hit a adc and dac in its travels, is the same true for the guitar input if your not using the built in digital effects? 

    0 69
    • Sircates22
      PedroRodrigues Hi Sircates22 please consider that regarding to the Aux input, when a signal is detected here and no guitar is plugged in, Play Electric will use the music signal to figure out key and scale information, in the case of having a Guitar the unit will use this signal instead to figure out key and scale information. This means that I any case digital processing is always involved on this unit operations when it comes the input stage.
      • April 3, 2021
  • New
    Newcomer - Level 1

    Hello every one!

    I have an issue using my Switch 6 pedal on my VL3X unit. I had it properly set up and functioning normally, but a while a go the TRS cable that came with it broke, now I just replaced it with another standard TRS cable and every switch will go to tuner, even though I have every one assigned to a different function. Any one has an idea why? Thank you very much for reading! 

    0 73
    • luisdiaz113
      kiskadar69 The TRS-TRS cable should be tested with an ohmmeter. If it is faultless, you should plug it into the Switch-6 and measure the Switch-6:
      0. If none of the switches on the Switch-6 are depressed, you will normally measure an open between the Tip and Ring output of the Switch-6.
      1. If only the first switch on the Switch-6 is depressed, you will normally measure 10 kohm between the Tip and Ring output of the Switch-6.
      2. If only the second switch on the Switch-6 is pressed, you will normally measure 20 kohm between the Tip and Ring output of the Switch-6.
      3. If only the third switch on the Switch-6 is depressed, you will normally measure 30 kohm between the Tip and Ring output of the Switch-6.
      4. If only the fourth switch on the Switch-6 is depressed, you will normally measure 40 kohm between the Tip and Ring output of the Switch-6.
      5. If only the fifth switch on the Switch-6 is pressed, you will normally measure 50 kohm between the Tip and Ring output of the Switch-6.
      6. If only the sixth switch of the Switch-6 is pressed, you will normally measure 60 kohm between the Tip and Ring output of the Switch-6.
      7. Normally you always measure 70 kohm between the Switch-6 Ring and Sleeve output.
      • March 27, 2021
      • Question about Switch 6 and VoiceLive3X
        luisdiaz113 Thank you so very much for your answer! I will certainly test the cables I'm using and see what's what! Now, let's say that I don't get the right kohmm readings. Where do I go from there? Do I need thicker or thinner cable wire perhaps? A different kind of plug? Again, thanks so much for your help!
        • March 27, 2021
      • Question about Switch 6 and VoiceLive3X
        kiskadar69 You should do what I wrote first. If you are unsure, ask someone to help.
        So the cable is a standard 3-core TRS-TRS (Tip, Ring, Sleeve) cable?
        • March 28, 2021
  • New
    Newcomer - Level 1

    How can I get my Ditto X2 repaired. The loop switch no longer works

    0 96
    • bcasetx69
      Nigel67 Hi bcasetx69. Please send us a Service Ticket and we can book your unit in for repair. This can be done by clicking on the support tab at the top of the page. This will open a new window. Scroll down and click on the Service tab and submit a ticket. Many thanks
      • March 26, 2021
Go to page