News & Updates

269,953 members
149,726 posts
  • Paulo1
    Triber
    2019-12-10

    Tannoy VLS 30 loudspeakers installed at the California State Fullerton University Pavilion after the systems of two other brands failed to overcome challenging acoustics and provide the need for multiple configurations.

    The project was overseen by California based audio-visual specialist, DJL A/V, who was tasked with designing an affordable system that can serve a triple dividable room and can be used in multiple orientations. DJL A/V modelled several designs before settling on a configuration that would provide the best sound quality and flexibility required. 

    This design consisted of eight Tannoy VLS 30 loudspeakers: two in each of the three dividable spaces and a fourth pair on the far south wall to allow seat space re-orientation. The VLS speakers form factor allowed DJL A/V to mount them high enough to shoot over all of the backdrops and portable projections screens that are regularly used and still cover all the possible seating arrangements. Four wall-mounted touch panels allow full control of any or all zones from anywhere in the complex thanks to DSP Guru Don Cicchetti.

    The design brief meant that obstacles were plentiful, with the need for multiple orientations being the component other brands failed to deliver. The previous contractor had opted for down-firing speakers from a high ceiling to solve this problem, however, the sound quality was not acceptable. Additionally, system control had to be intuitive enough for a novice to operate.

    Darryl Lima, president of DJL A/V comments “Following a speaker shoot out, the Tannoy VLS 30’s were an easy choice. As always, they provided extreme vocal intelligibility, their tight vertical pattern kept the sound in the seats and off the ceiling and they easily reached the back of the room. The low-profile design had minimal aesthetic impact which was quite a bonus compared to some of the big box items we were up against.” 

    Darryl adds “This was the third system to be installed in the “Pavilion Complex” and the first that worked and did a remarkable job. The client was ecstatic with both the sound quality and extreme vocal intelligibility, and everyone was surprised at how musical the system is considering the fact that no subs were used. The streamlined and modern look had much to do with the final approval of the project, which had been in the works for over a year. We find the entire VLS line up to be an excellent solution anytime a lower cost, high-performance speaker is required.” 

    For more information on California State Fullerton University: www.fullerton.edu
    For more information on DJL A/V: www.djlav.com
    For more information on Tannoy: www.tannoy.com

    CalStateFullerton.jpegImage credit California State Fullerton University

    read more...
    0 356
  • 2019-12-09

    CREA CXCI1 PH1_Facebook Cover Photo Artwork_Klark Teknik P0DF1_DN 30R_2019-12-02_Rev.0.jpg

    DN 30R
    ?bit.ly/KT-DN30R

    Features high-quality Neutrik XLR connectors for the highest signal integrity and reliability. A built-in headphone amplifier can be plugged into allowing for convenient local monitoring. Its volume can also be adjusted via the level knob.

    #KlarkTeknik #DN30R

    read more...
    0 260
  • 2019-12-09
  • Paulo1
    Triber
    2019-12-09

     

    RS2809_img080.jpg

    We love these old Tannoy adverts. The unique attributes of our legendary and exclusive Tannoy Dual Concentric™ driver units are still true to this very day.

    The main benefit of Tannoy’s Dual Concentric™ design is that it performs as a near-perfect point-source - with the full-frequency sound emanating from a single spot. This approach eliminates the phase shifts that all conventional multi-driver speaker systems suffer from, preserving the tonal character and harmonic structure of program material as no discrete-driver system can.

    The sonic benefits are immediately obvious with flat response, controlled dispersion and a wider sweet-spot in both the horizontal and vertical planes.

    There really is no substitute for Tannoy. Trusted by music creatives around the world, installed in the world's best venues and locations, perfect for listening at home.

    Tannoy - The Voice Of The Artist

    To find out more about Tannoy please visit: www.tannoy.com

    read more...
    0 84
  • Virn
    Community Manager
    2019-12-04

    Issue with embedding YouTube new videos as well as embedded videos in the community.

    Khoros is experiencing an issue with embedding YouTube new videos as well as embedded videos in the community. Their 3rd party provider is investigating the issue.

    As soon as we have more information we'll provide an update.

    Khoros Incedent report can be seen here:

    https://status.khoros.com/incidents/yhqf4lmzy9jf?_ga=2.35876322.354168261.1575431562-1348670904.1569901617

     

    Thank you

    read more...
    0 255
  • JenTan
    Community Manager
    2019-11-30

    We’re celebrating Behringer’s 30th anniversary and we’re donating 1000 synthesizers for the kids. Watch the video to know more details.

    Special thanks to our Friends and Tribers for their heartfelt messages.

    read more...
    4 555
    • JenTan
      SawSquareSine

      Congratulations Behringer, I can't think of any recommendations myself, but I'm sure this will help create some amazing musicians! Happy Birthday!

      • November 29, 2019
  • rovi-mortell
    Community Manager
    2019-11-25
    • rovi-mortell
      SawSquareSine

      I guessed right on the last post Smiley Happy

      • November 26, 2019
    • rovi-mortell
      DavidFin

      Could not afford the original when I was a kid...

      Now I can afford this better version, of the classic I always wanted.

      Thanks Uli!

      • December 1, 2019
    • rovi-mortell
      DavidFin

      It would be cool, if you could split the oscilators between the keyboard, and sequencer, so you could solo over a sequenced bassline. And/or split the keyboard...left hand=arpegiator, right hand solo.

      • December 1, 2019
  • TCH-Spencer
    Triber Alumni
    2019-11-21

    Hey, everybody!

    This is just a heads up that we've released a firmware update for Perform-VE.  If you connect your Perform-VE to VoiceSupport 2, you'll be prompted to update to the new firmware version 2.0 build 76.

    Here's the update's video:

    And here's what's new in more detail:

     

    Feature Updates:

     

    Auxiliary input routed through looper:
    The auxiliary input is now recorded into the looper along with the vocal signal. Once recorded into a loop, the auxiliary signal can be removed from a loop in the same fashion as vocals - hold the "Set" button and press the "loop" corner of the "Looper" button.

     

    Moved drum sample triggers to MIDI notes:
    Instead of using the previous MIDI CC's to trigger the drum samples, now particular MIDI notes sent on MIDI Channel 10 will trigger the drum samples. They are as follows:
    MIDI Note 36 = C2 = Bass Drum
    MIDI Note 38 = D2 = Snare Drum
    MIDI Note 42 = F#2 = Hi Hat

     

    Variable Gender Morphing:
    The first Style on the Morph button (blue ring) now has a full ring of variable gender from constant to full keyboard mapping before going through 9 analog synth vocoder waveforms.  This gives a nice gradient between formant-preserved and fully-instrumental.

     

    Added the ability to ignore incoming MIDI CC's, PC's, and MIDI clock:
    Hold the "Set" button while powering on your Perform-VE to ignore incoming MIDI Control Change, Program Change, and clock data. MIDI notes are still accepted in this mode. This is a volatile setting, so rebooting your Perform-VE will re-allow all MIDI data.

     

    Enhanced behaviour of the XFX effect's Stutter style 1:
    No more double-click, no pause/resume function, removed energy detection.  Now it's much easier to create stutter effects.

     

    MIDI/Lead mix stored in preset:
    This used to be a global setting shared by all presets.  Now, the MIDI voice level (blue) and LEAD voice level (green) are now stored per-preset.

     

     

    Bug Fixes:

     

    The Morph effect's Gender parameter is no longer applied to the Double effect

    Fixed a bug where clipping an MP-75 or MCA100 could lock up the UI

    More reliable detection of Switch-3 and Switch-6 on power-up

    • The Double effect was tweaked to sound active when Hardtune is enabled
    read more...
    3 1,969
    • TCH-Spencer
      inkie

      Hello, how to remap mp-76 buttons? And sample triggers only on channel 10?

      • March 9, 2020
    • TCH-Spencer
      TCH-Rob

      Hi @inkie ,

      Drum triggers are usually set to channel 10. Most midi controllers with pads may even work by default with the VK notes. You can find all the details on how to edit the MP-76 buttons on page 8 of the Perform VE user manual, but in short, once you're in "MP-76" mode (hold set and press "3" until set turns yellow) you can simply hold down the button you want to map on the MP-76, hold down the effect button on the VE you want to toggle, and then release both buttons. 

      • March 10, 2020
    • TCH-Spencer
      inkie

      I setted my launchpad pro mk3 to channel 10, and nothing happens after i trigger drums, even no midi indication on VE. ! And i figured out that Atack and Release are not saving in preset in firmware 2.0. That's very annoying to tweak it every time i switch the preset. Also, there is only a quick guide to download on the support page for PerformVE. And after i assigned the mp-76 button i don't understand how to clear the assignment, because i mapped it XFX instead of SAMPLE REC

      • March 24, 2020
    • TCH-Spencer
      TCH-Rob

      Hi @inkie ,

      We were having some issues with our website, but the manuals should be back on the website now! That should help with the MP-76 button mapping. 

       

      Which notes are you playing on the midi controller? Is it the same 3 that trigger the drums?

      • March 30, 2020
    • TCH-Spencer
      inkie

      Yes I'm using this


      Channel 10


      MIDI Note 36 = C2 = Bass Drum
      MIDI Note 38 = D2 = Snare Drum
      MIDI Note 42 = F#2 = Hi-Hat


      Аннотация 2020-04-02 131502.png


      And what about Evenlope Attack\Release settings that are not saving into the preset?

      • April 1, 2020
  • Paulo1
    Triber
    2019-11-21

    #TannoysGreatestHits

    The 2020 Grammy nominations have been published, Tannoy would like to congratulate legendary mix engineer Andrew Scheps and legendary mastering engineer Bernie Grundman who both worked on Grammy-nominated albums.

    Andrew mixed RIVAL SONS album “FERAL ROOTS” which received two nominations for Best Rock Album and Best Rock Performance.

    Bernie mastered Thomas Dybdahl’s album “All These Things” which is nominated for Best Engineered Album, Non-Classical. Andrew and Bernie are both long term Tannoy users.

    Tannoy believe in enabling you to hear music the way artists have created it. For over 90 years artists have trusted Tannoy studio monitors when recording their music while audiophiles have trusted Tannoy Hi-Fi speakers to authentically reproduce the artists’ music exactly the way it was recorded. Tannoy commercial speakers can be found in the world’s most prestigious audio installations. 

    Tannoy - The Voice of the ArtistGrammy Nominations 2020-collage.jpg

    To find out more about Tannoy please visit: www.tannoy.com

    read more...
    1 157
  • Virn
    Community Manager
    2019-11-18

    I'd like to grab this opportunity to acknowledge these people for their continuous support for the Community.

    I will be sharing this to you every 2 weeks as we review how we are performing every fortnight.

     

    Here are the top 5 posters for this fortnight:

    UserPostsKudosSolutions

    @KenMitchell 

    109 Replies

    18 10 
    @RexBeckett 90 Replies16 13 
    @GaryHiggins 45 Replies11 
    @DennisMilsom 36 Replies
    @DaveMorrison 24 Replies

     

    Again, thank you for your continuous support and I hope that we continue to help each other in making the Community. I hope to see these guys again on the next fortnight and hopefully, even see new faces.

     

    Let's keep supporting and acknowledging each other contributions, dont forget to give a Kudos and Accept as Solution on those replies helped you.

     

    Cheers~

    read more...
    2 375
    • Virn
      Virn

      Please also let me know if there are additional things you would like for me to include in these posts.

      • November 17, 2019
    • Virn
      AJSong Hi Virn, i am new to music tribe community, and can you share detail on how one can contribute to this community? Thanks
      • July 9, 2020
Go to page