Behringer

Behringer

Brand

Behringer

241,386 members
117,655 posts
  • goinz
    Contributor - Level 1
    2019-08-25

    I am not sure if it is a bug in sequencer but if you edit a pattern it is not possible to overwrite a rest with a note. vice versa is possible or note with note too. I run OS 1.07. BTW Great work! Love the Synth.

    0 122
    • goinz
      goinz

      Ahh....  have to rmeove the rest and the accent parameter before adding the note . But Sequencer is a bit buggy in some cases. But I think it is a gr8 feature and very powerfull. But a very big feature will be to control all other parameters too, like VCF or OSCI tune or what ever. 

      • August 24, 2019
  • doubleJ
    Contributor - Level 2
    2019-08-23

    My intention was to feed my sub from the Mono bus.
    Since I have to move to a different layer, just for that handle, I thought it would be cool to assign Mono to a DCA.
    I couldn't figure out a way to do it, so I used a MixBus (instead of Mono) and assigned it to a DCA.
    Is there a way to assign Mono to a DCA, do I have to do it the way I ended up doing it, or is there an even better way?
    Thanks...
    JJ

    read more...
    0 268
    • doubleJ
      ChaseMcKnight

      Hi @doubleJ ,

      Matrices, Main L/R, and Mono busses cannot be assigned to a DCA Group. Depending on what you're trying to achieve, you can select 'M/C depends on Main L/R' under Link Preferences in SETUP. This will link the Mono buss level to the Main L/R fader (Turn down the Main, you turn down the subs as well). Otherwise, using a MixBus is your best bet. 

      • August 23, 2019
    • doubleJ
      doubleJ


      @ChaseMcKnight wrote:


      Hi @doubleJ ,

      Matrices, Main L/R, and Mono busses cannot be assigned to a DCA Group. Depending on what you're trying to achieve, you can select 'M/C depends on Main L/R' under Link Preferences in SETUP. This will link the Mono buss level to the Main L/R fader (Turn down the Main, you turn down the subs as well). Otherwise, using a MixBus is your best bet. 





      Thanks for the info.
      I did see the Depends option, but I still want to have manual control.
      MixBux it is.
      JJ

      • August 23, 2019
    • doubleJ
      RexBeckett

      @doubleJ 


      You could use a custom layer to add the Mono bus fader to your normal channels. On X32 Edit, click the User 1 button on the left and then click Edit to define the Channels, Returns, Matrix, LR, M/C etc that you want. If you are using a tablet, Mixing Station MX32 also supports custom layers.

      • August 23, 2019
  • marosell
    Contributor - Level 2
    2019-08-23

    My bassist has a new bass cabinet with a Hartke 3500 head on it, so now I can output the sound to my XR18. I can also output from "Effect"-out on the head to the XR18 and return the signal back to the head before outputing from the cabinet. 

    I'd like to figure out a way, if possible, so that I can use an XR18 channel fader on the master fader panel to control the sound in the bass cabinet. I think I can bring the signal in on a channel and output it from an Aux with a xlr-to-trs plug back to the head, but then I'll have to control the volume using a fader on one of the busses. Is there a way to route the IN/OUT so that the master channel fader control the volume?

    Thanks!

    read more...
    0 128
    • marosell
      RexBeckett

      @marosell 


      Hi Mike, you don't need to use a bus. You can drive an Aux output from a channel post fader. For example, the following would drive Aux6 from Channel 10 post-fader:


      XR18 Aux.PNGIf you don't want the bass channel in the main mix, remove it on its Main tab by clicking on the LR button:


      XR18 LR.PNG

      • August 22, 2019
  • marosell
    Contributor - Level 2
    2019-08-23

    I'd like to try to side chain filter compression on my lead guitar based on the vocal channel. That way his sound doesn't have to be faded in and out when we gig live and the vocalist stays forefront when signing. The problem we're having is that the guitarist understandably doesn't like his own signal being cut out from his monitor mix when he's playing; it's distracting for one, but he also needs his volume set where he can hear what he's playing. Is there a way to make sure the side chain compression is only being filtered on the Main L/R and NOT out of the monitor mix?

    FYI, the monitor buses are being sent signal "Post-EQ" which I thought was pre-compression anyways, but I guess not pre-side-chain-compression?

    read more...
    0 135
    • marosell
      RexBeckett

      @marosell 


      Hi Mike, welcome to the forum.


       


      If you use the Post EQ signal tap for the guitar channel send to the monitor bus, it will not be affected by the channel compressor. See the block diagram to understand how the signal taps are arranged in the channel processing path.


      XR18 Sends.PNG

      • August 23, 2019
    • marosell
      marosell

      Thanks Rex. The Post-EQ tap is being used, but for some reason my guitarist swears he can hear his signal drop in his monitor.

      • August 23, 2019
  • marosell
    Contributor - Level 2
    2019-08-23

    Long time lurker first time poster! I'm gigging with my band live tonight and it's the first time we're using the bass player's cabinet. The head on his cabinet is the Hartke 3500. Previous equipment did not have the ability to send/return signal to a mixing board, but now we do.

    My question: If I bring the signal from the head into the XR18 on a channel (say, channel 2) from the effects send, then return the signal via Aux 2 to the head's return (xlr to trs adapter?), can the cabinet's volume be controlled via the XR18? I assume this would be very similar to using Bus2/Aux2 as a personal monitor, and only playing Channel 2 from this "monitor".

    Further: If so, I see that I can route the IN/OUT such that Aux2 is soley in receipt of Channel 2 instead of Bus 2. If I do this, can I control the volume going to the bass cabinet with the Channel 2 fader on the Master Fader Panel and not have to open the bus panel? Is there any other way to route signal such that the bass cabinet can be controlled from the Master Fader Panel?

    Thanks!

    read more...
    0 78
  • musictalks
    Contributor - Level 3
    2019-08-23

    I've a problem with my X32. The power shut down and now only the buttons on the right of the monit light (but are dim). Out of warranty, so cracked it open and have the following voltages from the PSU (main connector, 13pin)

    1) 47v, 2) 15.14v, 3) 6.67v, 4) 15v, 5) 0v, 6) 8.25v, 7) 3.3v, 8) 5.0v, 9) 5.0v, 10) 5.0v, 11) 0v, 12) 0v, 13) 0v

    235.2 v ac coming in through the back.

    Can anyone confirm if these are correct or not?

    Cheers from Australia

    read more...
    0 166
  • doubleJ
    Contributor - Level 2
    2019-08-22

    Maybe the X32's solo function doesn't work this way, but I'm used to Yamaha's Cue function.
    With that, it only outputs the cued channel.
    The X32 outputs all channels, but quieter.
    Is there a way to only output the solo'd channel to headphones?
    I didn't see an option that worked that way.
    Thanks...
    JJ

    read more...
    0 142
    • doubleJ
      DaveMorrison

      Hi @doubleJ 


      The default solo action will route the solo-ed channel(s) to the headphones/monitor outs.Screen Shot 2019-08-23 at 12.03.09 AM.pngThis screen shot shows the default settings:


       

      • August 22, 2019
    • doubleJ
      doubleJ


      @DaveMorrison wrote:


      Hi @doubleJ 


      The default solo action will route the solo-ed channel(s) to the headphones/monitor outs.Screen Shot 2019-08-23 at 12.03.09 AM.pngThis screen shot shows the default settings:





      The problem was that I was doing a virtual soundcheck and I had the master bus going out the same outputs as my kick and snare.
      Whenever I tried to solo, I used kick as it was the first channel.
      When it didn't work, as I intended, I didn't try other channels.
      I feel like a goob.
      Hehehe...
      Thanks for the assistance, even though it was just me being a moron.
      JJ

      • August 23, 2019
  • EllisLampman
    Contributor - Level 3
    2019-08-22

    How do I get the effects to go down with channel slider as it does with main LR? I drop the volume on a vocal channel in a monitor buss and I hear all of the wet signal. 

    Thanks

    E

    0 156
    • EllisLampman
      Paul_Vannatto


      @EllisLampman wrote:


      How do I get the effects to go down with channel slider as it does with main LR? I drop the volume on a vocal channel in a monitor buss and I hear all of the wet signal. 





      That is because the channel sends taps (post fader) to the buses feeding the FX (typically buses 13-16) are related to the channel strip faders, not the individual channel sends faders to the other buses that feed your monitors. Therefore the resulting wet mix returned is a result of the processing of those channel strip fader levels.

      • August 22, 2019
  • ron-e-g
    Contributor - Level 2
    2019-08-22

    I can't get the sound driver for my Uphoria 404 to share with two programs at once! It won't for example work with my Line6 PODFarm  guitar sim and Guitar Tonemaster.com site so I can jam along with their jam songs. Too if I have Lets say EZ drums2 open the guitar site or any other site such as youtube won't play any audio. Soon as I close the PODFarm or ezd2 They will play again! Any help greatly appreciated.

    Ron

    read more...
    0 250
    • ron-e-g
      KenMitchell

      Hi Ron ( @ron-e-g ), 


       


      This has been an ongoing issue for some time now.  Assuming you are on Windows since I've never had a problem on Mac?   This is caused by bitrate conflicts between the two programs.   


       


      I've had some success in Windows by doing the following to match the bitrate: 


       


      1. Start with no programs running. 


      2. Open the UMC Control Panel and go to the "Status" tab. 


      3. Note the "Current Sample Rate".  This is reporting what the interface is currently set to. 


      4. Open up Guitar Tonemaster.com and start to play a backing track. 


      5. Make note of what the current sample rate is in the UMC control panel. It may have changed. 


      6. In your DAW, create a project with the same sample rate and add your guitar sim to an instrument track. 


      7. Both should work now. 


       


      YouTube is a little trickier since each file you play may have a different sample rate.  You either have to do the same steps above for each file or your can use another trick.  What I do is use a tool called Audio Hijack (Mac) to save the audio to a .WAV file and then I add that to my DAW project along with whatever plugin I want to use.  I'm sure there are similar programs for Windows to capture audio from another program. 


       


      Hope this helps, 


      Ken

      • August 22, 2019
    • ron-e-g
      ron-e-g

      I'm not sure we are tracking the same Ken. Thanks for your response. My problem here doe not involve any of my DAWs.  Stand alone  only.  I like to jam along to different jam songs without opening any of my DAWs.  I have two.


      Interesting enough..This problem doe not exist with my stand alone Guitar Rig 5. But soon as I try to play through POD farm,  the  Guitar Tone.com site sound stops , and all I get is the perpetual circuling  arrow! Also If I try to open any other of my  stand alone audio programs like EZ drum, EZ keys , SampleTank or AmpliTube. It imidetaly stops audio in the playing track in the guitar tone site, or touTube site ,or what ever might be playing. I should mention here, I had problems..a lot when I upgraded to Win.10 back when. I thought they were resolved. So I don't know if this is a Windows thing or Behringer, or what. Once this event happens..I have to re-boot the CPU to get the player working again.

      • August 22, 2019
    • ron-e-g
      ron-e-g

      OK..Think I figured it out. I had to go to..Control Panel>Sound>line out 1-2 click on that then choose advanced Tab , and select from the drop-down list the same sample rate as the other programs seem to be using 24bit 44100Hz instead of 48000 Hz.  All playing well together again!

      • August 22, 2019
    • ron-e-g
      KenMitchell

      Hi @ron-e-g ,


       


      Glad to hear you got it working but... that will only work until some random SOB comes by and sets the bitrate back to 48000.  Just so you are aware. 


       


      Usually, the standalone versions of things like Guitar Rig are just .exe wrappers for the plugins so there's usually a place where you can change the birate for those as well. Similar to what I described when starting a new project in your DAW. 


       


      Hope this helps, 


      Ken

      • August 22, 2019
  • JohnGaia
    Contributor - Level 2
    2019-08-22

    I bought an XR18 two weeks ago and set my first gig with no problem, all the preamps were working fine but last week I noticed that I had to push up the Mic Gain to +60 on my Talk Back channel to get a good input level (the meter shows green almost yellow)  So I turned off the mixer and power it up again and just for few seconds the preamp worked well before going low again. I have changed the xlr cable, mic and it doesnt change

    read more...
    0 211
    • JohnGaia
      RexBeckett

      @JohnGaia 


      Hi Jonathan, welcome to the forum.


       


      Does this problem only happen on one channel? If you change the channel to use a different analog input (on the Input tab), does the problem remain?


       


      If you attach your scene file to your post (see Choose File button below) we can check for any configuration issues.

      • August 21, 2019
    • JohnGaia
      Paul_Vannatto


      @JohnGaia wrote:


      last week I noticed that I had to push up the Mic Gain to +60 on my Talk Back channel to get a good input level





      I'm curious as to how/why you are using a talkback mic on an XR18. Typically talkback is from FOH with a snake to the inputs/outputs on stage. The XR18 is the stagebox (inputs/outputs) and is usually located on the stage. 

      • August 21, 2019
    • JohnGaia
      JohnGaia


      Hi,


      I tried rerouting the input as you told me and the preamp worked it looks like the problem is coming from the stagebox (XR18), I attached the scene that I've been using since I got my hands on it.



      RockBand.scn
      • August 22, 2019
    • JohnGaia
      RexBeckett


      @JohnGaia wrote:




      Hi,


      I tried rerouting the input as you told me and the preamp worked it looks like the problem is coming from the stagebox (XR18), I attached the scene that I've been using since I got my hands on it.







      @JohnGaia


      Let me check if I understand correctly: The problem is with channel 16 (TB)? If you change the input to another preamp - say 15 - it works correctly? If yes to both, it may be a hardware problem. I would call your supplier.


       


      I don't see anything in your scene that would cause this problem on channel 16. I noticed than channel 8 (VOX1) has a very high gain (60dB). Is this also because of a problem?

      • August 22, 2019
Go to page