Behringer

Behringer

Brand

Behringer

306,015 members
190,360 posts
  • J_K_Loftin
    Contributor - Level 2
    2019-05-28

    How to configure? I use Sonar and am switching over to Studio One 4.5. I have used the Xr 18 Air as a live mixer, and recorded live with it. But I am trying to record a 4 person vocal group with stereo backing tracks so they can adjust yheir monitor mix and I, as engineer, have my own separate mix. I have had a professional studio for 30 years, got my first digital mixer, a Yamaha O2R in 1996. I also had an O2R 96, a Behringer X-32, and have 2 XR18 Air mixers, and have experience with Allen & Heath And Soundcraft and Mackie and Presonus and Yamaha LS9 and M7CL, so I am aware. But the specifics of routing the XR 18 so my 4 person vocal group can mix their own monitors and I can hear my own separate mix is proving to be difficult. Can anyone help?

    read more...
    0 164
    • J_K_Loftin
      DaveMorrison

      @J_K_Loftin The XR18 doesn't have enough busses for 5 stereo mixes. It's has 6 busses and LR.  


      For a mix on bus 1, select the BUS1 button in the lower left and raise the faders you want to send to output 1. Press the MAIN LR button to return to the main mix.


      BTW, I love my O2R. Still use it all the time.

      • May 28, 2019
  • ristst
    Contributor - Level 2
    2019-05-28
    0 140
    • ristst
      ristst

      I somehow closed the topic before describing my issue.  I want to enable the pormamento but I can't figure out how.  I also want to adjust the range of the pitch wheel, but I can't find any information on how that's done either.


       


      Can someone point me to documentation or a tutorial that shows how to do these things?

      • May 27, 2019
    • ristst
      ristst

      Sorry...PORTAMENTO.  Please excuse my spelling error.

      • May 27, 2019
  • ChrisVerm
    Contributor - Level 1
    2019-05-27

    I found how X32 edit can follow the selected channel on the mixer, but I want the inverse , i'd like to select a channel on my app X32 edit and my X32 rack follow it !! Is there's a way to do that ?

    Thx for all.

    C

    0 345
    • ChrisVerm
      RexBeckett

      Hi @ChrisVerm , welcome to the community.


       


      I don't know of any way to have an X32 Rack follow the channel selection in X32 Edit. I don't think X32 Edit transmits selection changes.

      • May 27, 2019
    • ChrisVerm
      ChrisVerm

      Thx for your reponse.


      Unlucky I am !!!! All is remotable, from the EQ to solo on a channel with  the X32 edit but there is only an exeption . I can't beleive that


      Even "selected follow solo" doesn't work ......


       


      I'm working on DIY hardware machine with some real button who transmit on network some OSC message, and this message could depend of wich channel is selected....(for bus1 send for exemple), like you do on a hardware machine, Select the channel and then set up the send in bus one of this channel...


      If you have an idea, how i can get around that,  i'm stuck...


      Thx for your time.


      C.

      • May 27, 2019
  • blaked2
    Contributor - Level 2
    2019-05-26

    Hi, I can't get my behringer uphoria UMC404hd to connect to my computer. It's an hp computer made around 2009. I've tried two different cables with no luck. Can I send it in to get it checked out?

    0 1,130
    • blaked2
      Paul_Vannatto

      Hi Blake @blaked2,


       


      Welcome to the forum. What OS are you running on that 2009 computer? Have you installed the appropriate UMC drivers?


       

      • May 26, 2019
    • blaked2
      blaked2

      I have windows 10 64bit. I installed the driver 4.59 as well as the ASIO4All driver. I tried using Asio4all but there's no signal from the mic I plugged in. There's an option for the Asio UMC driver but when I choose it gives me the message, "Error initializing Asio driver". 


      I've heard through Amazon reviews that many people have connectivity issues as well as sound playback issues with this particular interface. I purchaed in one year and 3 months ago so seemingly the warranty wouldn't cover replacing it if the issue is a hardware one with the device itself. 

      • June 3, 2019
    • blaked2
      Paul_Vannatto

      Hi Blake @blaked2,


      ASIO4All tends to block the 4.59 ASIO driver. Uninstall ASIO4ALL and the 4.59 should work. We've had a few others that did the same thing. Also in Windows 10, make sure the microphone is not turned off in the privacy section (Win10 has a nasty habit of turning this off, which also affects the ASIO drivers).


       

      • June 3, 2019
    • blaked2
      blaked2

      I uninstalled asio4all and still can't see my instrument's info on the track. Also, when I select asio 4.59 in Reaper's device section the input and output options are blank. The error initializing driver message is still there. Are you talking about the "privacy" section on the computer or the program? 

      • June 3, 2019
    • blaked2
      Paul_Vannatto


      @blaked2 wrote:


      I uninstalled asio4all and still can't see my instrument's info on the track. Also, when I select asio 4.59 in Reaper's device section the input and output options are blank. The error initializing driver message is still there. Are you talking about the "privacy" section on the computer or the program? 





      On the computer. I use Win7 and are avoiding Win10 as long as I can. But there have been reports of this privacy setting (microphone) in Win10 that blocks the ASIO drivers.

      • June 3, 2019
  • Stevefraun
    Contributor - Level 1
    2019-05-26

    Not sure if this is a bug, know it’s not setup issue. I have tried multiple ways to go around it. If I setup a channel to be post fader and then assign it to a DCA, all good here. When I turn volume up / down on DCA I expect no change in moitor but it follows the DCA as well.

    Traditional analog consoles I would do this to keep monitor volume the same during tracks but then I could fade out all on the channel strip so volume isn’t blaring in monitor when house volume is turned down. Any ideas?

    read more...
    0 99
    • Stevefraun
      Paul_Vannatto

      Hi Steve @Stevefraun,


       


      Welcome to the forum. I'm not sure what analog console you are referring to. But any of my experience with analog and/or digital consoles, post fader is always post fader (ie. after the fader). DCA's (or the older term VCA's) remotely adjust the fader levels of the channel strips assigned to them. Therefore if channel sends taps (to buses) are assigned post fader, the DCA will affect that send. I almost always assign post EQ taps to the channel sends. 


       

      • May 26, 2019
  • ChristopherDeme
    Contributor - Level 2
    2019-05-24

    Hoping someone can help. Just had this issue and we're supposed to be heading on the road tonight.

     

    The console is not conected to anything except main power. When powered on the x32, set to internal sync, shows i'm sync'd at 48k, and "A" shows a red square and says it's conencted to an x-32. The "B" is blank as expected.

    When I plug my m32 into AES 50 A the "x-32" disppears and the "A"goes blank. I can change the internal sync to AES50 A and it goes green. to whatever my m32 was set for. The AES50 B port functions similarly but when not connected does NOT show a red x32.

     

    I have:

    - Factory reset

    - Updated to 3.11 firmware (Both consoles)

    - Attempted multiple reboots, shutdowns, and removal of main power

    - Used multiple CAT 5e shielded cables.

    - Tried two different s16 stageboxes tested with the m32 (The m32 is an install and works SAT)

     

    I'm completely baffled. Help!?!?

    read more...
    0 2,880
    • ChristopherDeme
      Paul_Vannatto

      Hi Christopher @ChristopherDeme,


       


      What you describe is a very odd scenario. But if when connecting the M32, set as Internal sync, the X32 A sync light goes green, it is an indication that the X32 sync is not truly set to Internal, since there can only be one master clock anywhere in an X32/M32 eco-system. The other thing to check is that the S16 are set to modes 1 or 2 (SN Master light is off).


       

      • May 24, 2019
    • ChristopherDeme
      ChristopherDeme

      @Paul_Vannatto Lol, odd doesn't even begin to describe it.


       


      In stand alone it operates as it should. No sync on AES50 A or B only internal.


       


      When I am connected to the m32 I use the m32 as the master and x32 as a slave. I set x32 sync to AES50 A and it syncs. If I switch sync from AES50 A to AES50 B (Nothing connected) it loses sync and goes red. Switch sync back to AES50 A and it goes green again. Unplug the CAT 5e from AES50 A and it goes red again BUT the "x32" appears in the A diplay. So something is working correctly, just not the something I need. 


       


      This one wins for craziest glitch I've seen. I wish there was an easy way to maybe flash the SW on that card or the duaghter card attached. Seems to be an odd SW mishap...maybe.


       

      • May 24, 2019
    • ChristopherDeme
      Paul_Vannatto


      @ChristopherDeme wrote:


      @Paul_Vannatto 


      Unplug the CAT 5e from AES50 A and it goes red again BUT the "x32" appears in the A diplay. So something is working correctly, just not the something I need. 


       





      That is because when you unplug the cat5e cable, there is no longer any master clock in your eco-system (since the M32 was the master clock). When that happens, the X32 is in limbo state. It has to have a master clock assigned - but only one.

      • May 24, 2019
    • ChristopherDeme
      ChristopherDeme

      @Paul_Vannatto exactly right. So something is working properly relative to seeing or not seeing a master clock but other parts of whats happening over that interface are not fully operational. Thats what makes this so odd, I would say fun but I'm in a time crunch so less fun. Still fascinating though.


       


      I only have a few more hours before I have to call it and get somehting else. I've put in a request with Behringer support this AM but my guess is I won't hear back in time. 


       


      EDIT:


      In testing the console further I found the ultranet port no longer functions. The plot thickens.

      • May 24, 2019
    • ChristopherDeme
      ChristopherDeme

      A picture for reference. Just did a factory reset and it's sitting stand alone with no connections other than main power.

      IMG_3968.JPG
      • May 24, 2019
  • robnoxious
    Contributor - Level 2
    2019-05-23

    Came across an issue that has me puzzled.  I have also found this on the Midas m32.  Equipment is x32 connected via cat5 to the S16.  There are some input mono channels that are recieving signal, routed correctly, going to LR, but not going out to the speakers.  To correct, I copied/paste from a known good channel.  I compared both channels prior to copy/paste, and they are identical in the set up.  An additional bug is the LR shows meter output, but the fader is not controlling the output to the speakers.  It appears to be in an "always up" state.

     

    I did update the firmware to the latest, 3.11 - no change in the LR fader control.  I also did a factory reset and reimported the scene from USB, same result with LR.  I am going to assume something is wrong with the scene - but - this problem is also happening with a completely different scene, in a different church, on the Midas m32.

    read more...
    0 173
    • robnoxious
      Paul_Vannatto

      Hi Rob @robnoxious,


       


      Welcome to the forum. What you describe could be a combination of output assignment and parallel path issues. The best way for us to help troubleshoot is for you to save one of your scenes to a file, zip it and attach it to your next response (Choose File button below). 


       

      • May 23, 2019
    • robnoxious
      robnoxious

      Attached is the zip scene in question.  Thank you for reviewing.

      IMPACT.scn.zip
      • May 23, 2019
    • robnoxious
      Paul_Vannatto

      Hi Rob @robnoxious,


       


      Unfortunately something glitched and that scene is empty (no OSC commands). Please try again.


       

      • May 23, 2019
    • robnoxious
      robnoxious

      Apologies for the error in first file and for delay in responding.  Attached is the most recent file.

      IMPACT1.scn.zip
      • May 31, 2019
    • robnoxious
      Paul_Vannatto

      Hi Rob @robnoxious,


      What is the Main L and R connected to? If it is the S16 (in mode 1), there is a routing problem (Routing, Out 1-6). These outputs are not assigned to any of the outputs 1-8. Main L is assigned to outputs 9 and 15, and Main R is assigned to output 16.


       

      • May 31, 2019
  • NeilMillward
    Contributor - Level 3
    2019-05-23

    Has the x32-q for iphone been discontinued?  It doesn't seem to be in the app store anymore.

     

    I have now got both the x32 compact and full sized desk - is all the software the same?  ie. same firmware, and will my x32-edit work with both?

    read more...
    0 174
    • NeilMillward
      RichardYClark

      Answer to your second part of the question. Yes firmware and X32 Edit common across all versions of the X32 range. 

      • May 22, 2019
    • NeilMillward
      Paul_Vannatto


      @NeilMillward wrote:


      Has the x32-q for iphone been discontinued?  It doesn't seem to be in the app store anymore.


       


      I have now got both the x32 compact and full sized desk - is all the software the same?  ie. same firmware, and will my x32-edit work with both?





      Hi Neil, 


       


      Good to hear from you again. The X32-Q was developed on an older development platform which is no longer supported by the newer iOS. So that is probably why they pulled it from the app store. The M32-Q should still work for both M32 and X32. But the good news is that Mixing Station has now been ported (from android) to iOS and is available on the app store. We all love using Mixing Station Pro - worth checking out.


       


      @RichardYClark answered your second question correctly.


       

      • May 22, 2019
  • AlRubio_Jr_
    Contributor - Level 2
    2019-05-22

    Hello!
    I have been asked to configure an X32 and S32 to provide the stage with L/R/Mono Subs & 4 Monitor Returns.
    I've been successfully able to get the monitor outputs to appear on the S32's Output jacks 1-4.
    And L/R are appearing on Output jacks 15-16.
    But while I am "metering" a mono signal at the mixer, that signal is not appearing at any of the Output jacks.

    Isn't there a "default" output jack that it should appear at?
    Might there be a step at getting the Mono signal to the S32 that I am overlooking?
    Thank you for any assistance!

    read more...
    0 128
    • AlRubio_Jr_
      DaveMorrison

      @AlRubio_Jr_ 


      Under Routing, select the Output 1-16 tab. Assign the output you want (14?) to MC

      • May 22, 2019
    • AlRubio_Jr_
      AlRubio_Jr_

      Almost certain that we tried doing that, but may have been on the "wrong page" or some such mistake, what with the unfamiliarity pertaining to the S32/AES50 protocols.
      Doing a lot of reading and video watching in the interim - will attempt again tomorrow.
      Thanks so much!

      • May 22, 2019
    • AlRubio_Jr_
      DaveMorrison

      @AlRubio_Jr_ 


      The routing can be a little confusing. The Output 1-16 is an intermediate stage. You have to set it there before the AES50 can "see" it.

      • May 22, 2019
  • supertwang
    Contributor - Level 1
    2019-05-21

    Dear Behringer,

     

    I believe I speak for many when I ask you to please make more X32 core, single unit rack mixers.  The M32, while it may do something similar, does not have the front panel controls I need to at least minimally operate the mixer from the panel.  This includes a headphone jack.  Really???  How could you leave that off the M32 (or any mixer for that matter???)  The essential features the M32 lacks make the current iteration completely undesirable - I just can't bring myself to buy it.  And, I'll bet it isn't selling very well.  Please rectify that with a version 2, or re-release the x32 core.

     

    I'm currently rocking an XR18 and an XR12.  I LOVE THE LINE, but with a moderate table full of synths/fx, I am outgrowing the limited channel counts -- Ineed more inputs and sends.  More importantly, I need a unified mixer view on the computer.  I have a really hacky signal path due to this being two separate mixers, trying to be on unified one.  Unfortunately, there doesn't seem to be a good upgrade path for me within your lines of digital mixers.  Specifically, I have little to no rack space -- I could probably fit 1U (sideways along the desk?), but otherwise have no rack.  I also rely on the stagebox form factor, tucked away in the back of my music desk to keep my connections hidden and tidy.   The combo of x32 core + SD16 + SD16 is what I'd immediately buy if I could. (or an improved v2 m32).  

     

    Please help!

    Best

    ST

     

     

     

    read more...
    0 142
    • supertwang
      RyanFinch

      I've got a sneaky suspicion that will never happen.


      When I finally got a used Core I almost immediately replaced it with a Rack. 

      • July 14, 2019
Go to page