Bugera

Bugera

Brand

Bugera

289,846 members
172,410 posts
  • Celestin
    Newcomer - Level 1
    2020-07-08
    Is it possible to assign one of the buttons on the switch 3 to the guitar boost feature?
    0 52
    • Celestin
      leah Hey Celestin! You can definitely do this. Here's some information from the device manual:


      "Guitar Boost is also available by mapping the MIX button to a footswitch. This acts as a +6dB level increase for solos and the like. The MIX button is lit white when boost is ON and unlit when boost is OFF."


      Check out page 13 of the User Manual for more info on assigning parameters to the Switch-3:
      https://mediadl.musictribe.com/media/PLM/data/docs/P0DED/PERFORM-VG_M_EN.pdf
      • July 8, 2020
  • JayEli
    Newcomer - Level 1
    2020-07-08
    Hi there I have a bugera 333 head and the effects loop won’t work. I connected a electro harmonic tone tattoo pedal through it and I get no sound any idea on how to fix?
    0 131
    • JayEli
      WilliamR Hello Jay Eli, I'm assuming that if you are hooking the tattoo pedal to the effects loop that you are trying to bypass the preamp section of your 333 head altogether. If this is the case, you want to go from the out of the tattoo pedal, into the effects return of your 333 head. Also, be sure to set the input level of the return with the level knob on the back of the amp. In this scenario, you will be bypassing all of the tone controls on the front end of the amp and getting all of your tone from the tattoo pedal. Since this is a distortion pedal, you would usually plug it into the amp's front end. You don't want to plug it into the send and return of the effects loop; It would not sound terrific.
      • July 9, 2020
  • GuusOlivella
    Newcomer - Level 1
    2020-07-07
    Hello, my name is Gustavo, I am from Argentina. Yesterday I bought a Bugera G5 Infinium valve head. It has an 8ohms output and says next to that output "minimal". This means that I can connect a 16ohms speaker and I will not have any kind of problem? Thank you!!
    read more...
    0 63
    • GuusOlivella
      WilliamR You should be able to run 16 ohm cabs with the 8 ohm load. As long as the cab is higher or the same, you should be fine.
      • July 15, 2020
  • Rahovart
    Newcomer - Level 1
    2020-07-06
    Hello there! Just got my hands on a 6262 212 combo and am loving the heck out of it. I've been told these things are wired a little differently, so here is my question: The combo is set stock at 16Ω, while using the second speaker out, should I be using a 16Ω cabinet? I do not know of the outs are wired series or parallel, so if anyone knows, please share!
    read more...
    0 36
    • Rahovart
      WilliamR Hello, The output is wired in parallel so a 16 ohm extension cab would be Ideal when using it with the internal speaker at the same time. Be sure to set the switch to 8 ohms if you do. You can unplug the internal speaker if you want to use a 4x12 by itself. be sure to match the switch to the single cab ohm load if you do.
      • July 15, 2020
  • yzfsergio
    Newcomer - Level 1
    2020-07-02
    BXD15 BXD15A I would like to know the difference between those two models and how it is possible that they give 1000w of power if the speaker is 250w.
    0 103
  • daviddl79
    Newcomer - Level 1
    2020-06-30
    anyone know the amperage for the f4 and f3 fuses (internal fuses)
    0 68
  • Feedonfear
    Newcomer - Level 1
    2020-06-23
    Hello, I own a Bugera T50 Infinium and I've been looking all over the internet trying to find the schematics to no avail. Does anyone know where I could find them?
    0 114
  • Jonjonjon
    Newcomer - Level 1
    2020-06-23
    Greetings, i’m an electronics technician and a musician as hobby, a friend gave me a 333xl 120 watts head, no head cab nor front and back grille, is there a way to get those parts? Thanks.
    0 117
    • Jonjonjon
      AlexLane Could you please put in a support ticket using the link at the top of the page, thanks!
      • June 23, 2020
      • Bugera 333xl repair
        Jonjonjon Ticket number CAS-113841-K4Z7X3
        • June 23, 2020
    • Jonjonjon
      Jonjonjon Ticket number CAS-113841-K4Z7X3
      • June 23, 2020
      • Bugera 333xl repair
        AlexLane Hi Juan, this will be looked at by the relevant team ASAP. Due to recent Covid-19 issues it may ta,ke a little longer to get to you than normal, but rest assured the team will answer you ASAP!
        • June 24, 2020
  • Stephane666
    Newcomer - Level 1
    2020-06-22
    I need a power transormater for bugera 333XLinfinum you ave this
    0 219
    • Stephane666
      SethMusicTribe The part number your looking for is Z65-94063-02070. Simply start a case for spare parts! Let me know if you have any problems doing so and I will assist you.
      • June 22, 2020
      • Parts
        Stephane666 Thanks allot
        • June 22, 2020
      • Parts
        Stephane666 Were am start a case end were is the spare part in the cite ?? Sorry for my inglish am franch canadian
        • June 22, 2020
      • Parts
        RexBeckett At the top of this page, click Support -> Care -> Create a Care Ticket and select Type: Spare Parts. Make sure that you enter all required (*) data before clicking Submit.
        • June 23, 2020
    • Stephane666
      Stephane666 I ave do thath end now am wait? Somme pepole talk to me?
      • June 23, 2020
      • Parts
        RexBeckett Watch your email - including the spam/junk folder - for a response.
        • June 23, 2020
    • Stephane666
      Stephane666 !
      • June 23, 2020
    • Stephane666
      SethMusicTribe I have your email! I have contacted our part department and they will be reaching out to you very soon!
      • June 23, 2020
      • Parts
        Stephane666 Thanks alots ????????????????
        • June 23, 2020
      • Parts
        Stephane666 Sorry wrong caracter !!!!!!
        • June 23, 2020
  • martyepisg
    Newcomer - Level 1
    2020-06-15
    Hoping for help. I ha e a bugera v5 infinium that has a lot of 60hz hum. I have removed all inputs including guitar, moves to different outlets around the house with no shared outlet, and turned off typicall y “noisy” appliances like dinners. The hum emu area from the speaker, and if the speaker is disconnected the re is no hum. If the gain is set to 4 and the tone to 5 there is very little hum, and volume and reverb does not effect the hum. Hoping someone has a fix. I don’t think this is mains hum, I think it is an internal issue.
    read more...
    0 64
Go to page