Lake

Lake

Brand

Lake

306,085 members
190,433 posts
  • New
    jaegil
    Newcomer - Level 1
    2022-10-28

    FIR EQ can be imported from the PLM+,D SERIES amplifier to the xp module.
    However, most tuning is done in PEQ when recalling a manufacturer's preset.
    I want to create and use a FIR EQ through the FIR DESIGNER program, but
    I can't. It would be nice if there was a function to import FIR EQ from the manufacturer's preset module when updating later.

    read more...
    0 1
  • New
    jaegil
    Newcomer - Level 1
    2022-10-23

    hello
    lake controller graphics are not smooth when using Windows 11 laptops these days
    The font is displayed in yellow, and the menu bar is not visible.

    0 12
    • jaegil
      NicJonesMT There is currently a compatibility issue between Lake Controller and Intel 12th Gen Processors using the iGPU Iris Xe Graphics card, where all text within the application is highlighted. 

      The development team are currently working to release a patch to resolve this issue. For the time being the following work around will resolve your issue. 

      1 - Right click Lake Controller and select Properties. 
      2 - Go to the Shortcut tab. 
      3 - Add "noperformancemode" to the Target box.
      4 - Apply the Changes and reopen Lake controller.



      If you are still experiencing this issue then please click support at the top of the page and submit a technical support ticket.
      • Oct 25
    • jaegil
      ThomasPLe Hi when i : 3 - Add "noperformancemode" to the Target box. they told me wrong target ....
      • Oct 26
    • jaegil
      Tibo

      same issue for me, and the "noperformancemode" didn't work either...
      a solution?
      it is really boring

      • Thu at 12:13 PM
  • New
    Anglo
    Newcomer - Level 1
    2022-09-16

    We have a Behringer MPA40 with the wireless usb stick and hand held wireless microphone.  Can anyone recommend a lapel mic (part number) to use with it?  TIA

     

    0 2
  • New
    andr
    Newcomer - Level 1
    2022-09-15

    goodmorning 

    I need old version of lake controller (before v.5) to remotate an old  marvellous LAKE MESAeq that has an old firmware

    or alternatively

    the last firmware for that machine (but I'm afraid to upgrade if it crashes.. and no return)

    there is someone to help me?

    read more...
    0 4
  • New
    SSN1
    Newcomer - Level 1
    2022-08-04

    Hi

    I am currently using Lake Controller 7.0.8 but cannot get a Secondary Controller to run succesfully. I have L.C. running on my FOH PC (connected over Ethernet), controlling multiple LM44s and 26s. When I open L.C on my Tablet to run as a secondary controller the popup window to select Primary or Secondary apperars on the FOH PC, but selecting Primary does nothing, and on the Tablet L.C. just opens to a blank page. L.C. then crashes on the FOH PC. I can see the modules on the network from the Tablet, and drag them onto a page, so the Tablet is communicating with the processors.

    I have always used Secondary Controllers succesfully in the past, but this is the first time I have used version 7.0.8. Also this is the first time I have tried to use Lake Controller on a tablet running Windows 11 (the FOH PC is running Windows 10)

    Any ideas as to what I could try to get this working? One of the reasons I spec'd Lakes for this tour is because of the Secondary Controller funtionality, without it there are few advantages of using Lakes over other products.

    read more...
    0 102
  • New
    olivier085
    Newcomer - Level 1
    2022-07-25

    Hi, I just received an LM26 for an old DAS system processing, I entered speakers parameters in Lake Controler and saved my config in a .csc file . I see this file on my desk but when I launch LM preset manager and try to send it to LM26 internal presets, I can't see any csc file at all. What's wrong ?

    read more...
    0 7
    • olivier085
      NicJonesMT Hi Olivier085.
      Please click support at the top of the page and submit a technical support ticket.
      • Jul 26
  • New
    Blink180stu
    Contributor - Level 1
    2022-06-16

    Hello, 

    I work at a venue and we have a Lake LM-44 processor that was setup with the Lake Processor software but unfortunately I cannot remember the password I set within the software. Please tell me you can help!

    Stuart Badger 

    read more...
    0 10
    • Blink180stu
      NicJonesMT Hi Blink180Stu.
      Please click support at the top of the page and submit a technical support ticket. A member of the team will then advise you further.
      • Jun 17
  • New
    BasilM
    Newcomer - Level 1
    2022-05-22

    Hello

     

    I have a problem with Lake Controller on my new laptop. All the text on the interface appers selected in yellow, making it difficult or impossible to read (see screenshot).

     

    I tried different display modes as well as deactivating hardware acceleration. I also tried setting Windows to execute Lake Controller on the dedicated nVidia Card, but the programm still only runs on the integrated graphics.

     

    Any ideas as how to solve this?

    read more...
    0 290
    • BasilM
      NicJonesMT Hi BasilM
      Can you please click support at the top of the page and submit a technical support ticket.
      Please provide the full build specs of your machine, and the Windows Version and Build (Found in About your PC) and we can then forward this on to the development team.
      • May 25
    • BasilM
      BasilM

      That's what I tried in the first place, but there is no support category for the Lake controller software. When I choose Lake as brand, I have to choose either the LM26 or LM44 and provide a serial number, which I don't have. It's a pity how bad support has become since these brands were bought by Behringer.

      • May 25
    • BasilM
      ThomasPLe

      Hi, Any news? same problem here and massive crash when I tried to EQ

      • Oct 26
    • BasilM
      fennek

      I have exactly the same problem. Any news?

      • Nov 24
    • BasilM
      Tibo

      Same issue... is there any solution??

      • Thu at 12:14 PM
  • New
    tomskanpa1
    Newcomer - Level 1
    2022-04-13

    I have an issue with one lm 44 and suspect another too

    i have been looking at this over the last week. the pattern i am seeing is that on first LM44 power on either through the switch or direct cat 5 to the tablet it does not appear on the network, (i have been using the Lake Update app to check its status) every subquent power cycle after that it shows up on the network. when you come to it cold the pattern repeats.
     
    anyone else expericence this?
     
    Tom Tunney
    read more...
    0 13
  • New
    Whoisbeeps20
    Newcomer - Level 1
    2022-03-02

    Hello I'm struggling to setup my lake lm44. I understand how to set it up but maybe what I'm looking to do isn't possible. I want to make my first two inputs(analog) go straight through. Basically Eq only. Input 3(analog) I want to have a cross over on it. Then nothing in 4. Is this possible? It seems I can either have a mesa Eq setup or a countour cross over?

    read more...
    0 9
Go to page