rodgersg wrote:

Thank you - that was it.



Also found my "factory reset" in the menu as well.



Now I'm happier, but I'd sure like to know how to stop the crazy little blinking light on the front!

wu_10 wrote:

Hey there-



Laird, can't you set it up as the primary being boost and not tap tempo? If so it's a steady versus blinking light....

kevin2106 wrote:

Guitar ----------------------VHT Valvulator input (a buffer)

VHT output A---------------G system Input

G system Insert Send-----Hum E. Input 1

Hum Output 1--------------Mesa Triple Rectifier Input

G system Output (L)------Hum input 2

Hum E. Output 2----------Mesa FX loop Return

Mesa FX Send-------------G system Insert Return



Both the mix and the send level on the Mesa FX Loop are set at 100%.



GBL LEVELS MENU



Input Gain: 0db

Lopp Level: 10db

Loop Headroom: 2db

Volume: 0db

Volume Pos:

Output Level: 0db

Boost Max: 0db



There is still a loss of gain. I am not sure what to do now? I placed an Eq in the loop of the G system to try and compensate but it can only ad a bit before it sounds bad. When I turn my gain up past 2 o clock the hum and hiss is really bad and it becomes very noisy. I am trying to get that true tone out of the amp I am close but still a loss of gain/tone.



Does anyone have any tips maybe to get that full true tone out of their amp?

chree wrote:

1. The latency when switching patches... is this a normal thing? Seems to only be about 1/3 of a second, but still tough to get used to.



2. I'm getting some massive volume loss even with the compressor, gate, and boost bypassed. My input and output levels seem to be set properly. I'm playing through a Krank Revolution head (not the Rev+), using the 4-cable method with all Mogami cables, with the ones going into the effects loop being TRS. I tried a Boost N' Buff pedal before the effects return and it solved the volume issue, but it turned my tone into POD tone and sucked out all of my low end



Has anybody else encountered either of these problems?

chree wrote:

Has anybody else encountered either of these problems?

Laird_Williams wrote:

chree wrote:

1. The latency when switching patches... is this a normal thing? Seems to only be about 1/3 of a second, but still tough to get used to.



2. I'm getting some massive volume loss even with the compressor, gate, and boost bypassed. My input and output levels seem to be set properly. I'm playing through a Krank Revolution head (not the Rev+), using the 4-cable method with all Mogami cables, with the ones going into the effects loop being TRS. I tried a Boost N' Buff pedal before the effects return and it solved the volume issue, but it turned my tone into POD tone and sucked out all of my low end



Has anybody else encountered either of these problems?

What are your evaluation criteria for postulating that "My input and output levels seem to be set properly." ?? Sounds like levels in the G-System may not be set properly somewhere.