Tannoy

Tannoy

Brand

Tannoy

249,987 members
127,085 posts
  • LP8400
    Newcomer - Level 1
    2020-06-23
    I m looking for the screws to assemble the low feet (or you can also use them for hanging speakers on the walls). I need two complete sets (to assemble the speaker in the holder, to attach the bottom rubber foot, and to install the safeguard mesh in front of the speaker). If someone has an alternative, let me know pls.
    read more...
    0 108
    • LP8400
      AlexLane Hi there! Could you please put in a support ticket to contact our parts team, they should be able to help!
      • June 23, 2020
  • ayhankizmaz
    Newcomer - Level 1
    2020-06-23
    I have Tannoy Kensington SE. Is there any upgrade kit for tannoy or what can I do for better sound.
    0 110
    • ayhankizmaz
      AlexLane Hi, there is no upgrade kit per say! What specifically do you want to improve? Could you detail your setup and space for me, might be able to give you some tips ;)
      • June 23, 2020
      • Tannoy kensington se
        ayhankizmaz Hi,
        • June 27, 2020
      • Tannoy kensington se
        ayhankizmaz Hi amp. İs asr emitter 1 and dcs puccini cd player my speaker cable is transparent audio biwire..
        • June 27, 2020
  • rsillito
    Newcomer - Level 2
    2020-06-16
    Hi -- I raised a support ticket CAS-107908-P8Q1S2 nearly two weeks ago but have had no response, so I am posting here in case this ticket has been missed somehow. There is a small tear in the rubber surround on the bass driver of one of my Tannoy XT8F speakers. I would like to obtain the necessary replacement parts to deal with this (e.g. a replacement rubber surround, a reconing kit, or even a replacement driver if the latter are available). If someone is able to help me with this I would greatly appreciate it. Many thanks!
    read more...
    0 67
    • rsillito
      GaryHiggins They changed everything, not surprisingly that might be screwed up too. Sorry, don’t see much official response here either except self serving promos. I guess keep trying is the best advice.
      • June 16, 2020
    • rsillito
      ChrisEdwards1 Hi Rowland, i hope you are well.
      Unfortunately there is currently a back log of cases the team are working through which has caused a delay in their response. I will pass this on to a member of the team, however, they do need to work through them in date order.
      I'm sorry for any inconvenience this has caused and thank you for your patience.
      • June 17, 2020
      • Rubber surround / Re-cone kit / Replacement for XT8F bass driver
        rsillito Hi Chris, thank you for your reply. I'll look forward to hearing from someone soon then.
        • 2
        • ·
        • June 17, 2020
  • longmanjon
    Contributor - Level 1
    2020-06-12
    hi, can anyone help put me in touch with someone that can provide spares for the reveal 502, as i need a replacement mid/bass driver. i have raised a case but have had noresponse
    0 117
    • longmanjon
      ChrisEdwards1 Hi @longmanjon ,

      I hope you are well.

      Would it be possible to share your case number for me and i will take a look into its current status?

      Thanks in advance.

      Christopher Edwards
      Customer Solutions Lifestyle Specialist
      • June 15, 2020
    • longmanjon
      longmanjon this is one of them CAS-105358-G3C5V6
      • June 15, 2020
    • longmanjon
      longmanjon i raised another CAS-107547-Z2X0N5
      • June 15, 2020
  • JeffSterling
    Contributor - Level 2
    2020-05-18

    I still have my old Tannoy SRM-12B and they still sound better than most anything on the market. I have one speaker making a rubbing sound audible only at low level listening. I am wondering if there are still replacement parts for these speakers.

    read more...
    0 143
    • JeffSterling
      ChrisEdwards1

      Hi @JeffSterling ,


      Hope all is well.


      In this case we would recommend getting in touch with Lockwood Audio.


      Lockwood audio have been used by Tannoy for many years for servicing vintage Tannoy and supplying obsolete parts:
      www.lockwoodaudio.co.uk


      UNIT 28
      28 Ryefield Crescent
      Northwood
      HA6 1LT
      Phone
      +44(0)144 282 4007
      Mobile
      +44(0)781 304 1959
      Email
      [email protected]


      Alternatively please try the following eBay seller who stocks various old/rare components:
      http://stores.ebay.co.uk/mainlytannoy


      Hope this helps.


      Christopher Edwards


      Customer Solutions Lifestyle Specialist

      • May 18, 2020
  • jalexander510
    Contributor - Level 1
    2020-05-08

        I recently purchsed used 800a monitors (with matching sub) and they had some of the best imaging ever heard, but they did not last long. The Right speaker was dead in the water, when I opened it up, the LM317/LM337 transisters looked fried, so I replaced them. In the process the board started to delaminate in around the holes. I just used jumber wires to what I thought were obvious places, but now I have sound but its only static. 

         I would like to replace the amp with original on the one monitor or use a similar active amp to replace both speakers. I assume I would just have to match the crossover network before it splits to the amps. I really want to use these monitors again because I just got them last month. Can some please guide me a bit?

    read more...
    0 76
  • Serge7000
    Contributor - Level 1
    2020-05-06

    When will the tannoy gold 8s be back in stock?

    0 87
  • ManuelAndrade
    Contributor - Level 1
    2020-04-18

    I just bught the Tannoy Gold 7 monitors, when I turn them on (even without any cable connected to the audio inputs) there is a radio signal noise coming from both of the monitors, anybody experienced this?, (I's loud enough to recognize the songs!!!)  thanks!!!

    read more...
    0 115
    • ManuelAndrade
      ChrisEdwards1

      Dear @ManuelAndrade,


      Hope you are well.


      I can see you have also submitted a support ticket regarding this matter, I have sent a reply to you this morning on via the support ticket. If there is any further information you require to my response please reply to my response and I will assist further.


      Take care.


      Christopher Edwards


      Customer Solution Lifestyle Specialist

      • April 19, 2020
  • alexminc
    Contributor - Level 1
    2020-04-16

    Hello. My Tannoy wireless headphones do not work together, it works either right or left.

    I tried all possible connection options. How to make the headphones work correctly?

    0 144
    • alexminc
      ChrisEdwards1

      Dear @alexminc,


      Hope you are well.


      If you have not already done so please try conducting a factory reset on the device, the below steps will guide you through this:


       



      1. Put the LIFE BUDS in the charging case,

      2. Press LIFE BUD to charging status (red LED on)

      3. Double-press the MFB button,

      4. The LIFE BUD reset successfully after blue LED flashes 5 times, then do the same for the other one.

      5. If reset is successful and both earbuds flash" red and blue", it means they are in pairing mode. Both earbuds will search automatically and then pair themselves.  After they are paired, only the master earbud (Right) will flash red and blue, and the other earbud flashes blue slowly. After the right earbud is connected to the mobile phone, both earbuds will have sound.


      If upon doing this it does not resolve the issue please submit a support ticket for further assistance.


      Take Care.


      Christopher Edwards


      Customer Solution Lifestyle Specialist

      • April 19, 2020
  • vincentmac
    Contributor - Level 1
    2020-03-09

    Customer support is unresponsive and I have questions. I am trying to replace power supplies for my QFLex16 m-1 and sb pairs. When we removed these from one of our spaces the power supplies were left behind. I have reached out to spare parts tickets, the customer service portal and anywhere I can try to get ahold of people but have had no luck. trying here...

    read more...
    0 242
    • vincentmac
      RexBeckett


      @vincentmac wrote:


      Customer support is unresponsive and I have questions. I am trying to replace power supplies for my QFLex16 m-1 and sb pairs. When we removed these from one of our spaces the power supplies were left behind. I have reached out to spare parts tickets, the customer service portal and anywhere I can try to get ahold of people but have had no luck. trying here...





      @vincentmac 


      Hello Vincent, welcome to the community.


       


      The Care ticket is currently the only way to request technical support, service and spare parts from any of the Music Tribe companies. Did you get Care tickets raised? You should be able to see them through the Care Portal. Some people have missed responses because the emails were routed into their spam folders. 


       


      If you tell us the Care ticket numbers, we can get someone to check into them for you.

      • March 9, 2020
    • vincentmac
      Matthew_Simmons

      CAS-107668-K1X4P5 How about this case number? 

      • June 9, 2020
    • vincentmac
      soundtechsunited

      hey, so I am having trouble getting in contact with anyone at music tribe... this is my question:
      "Hi,
      I am writing to you in regards to my account. I registered a couple of products back in 2019: Midas M32; Midas MR32; Midas DL16... so I already had an account under this specific email address... I recently made a purchase of a Midas MR18, I believe I purchased it on 05.28.2021 from sweetwater.com;

      I am about to login to my account to register my new product, I notice that it says "user account does not exist" So I am wondering what is going on? I have my username and Password written down... why does it not exist? Anyway, I had to register all over again, and I assumed the products I purchased back in 2019 will appear on my account... to my disbelief, it does not..... Can you please tell me what happened to the registered products I had on the account? I just registered my "Mr18" and would like it if my other products that I registered back then reflect on my account please. thank you.

      Duberney Quintana since no one is answering me, I would like it if you could answer this question here for me...

      • Sep 4
Go to page