TC Electronic

TC Electronic

Brand

TC Electronic

267,754 members
147,251 posts
  • jamesmark
    Contributor - Level 1
    2019-09-19

    Trying to download the latest version 4.1.10 toneprint but it keeps making network error. any mirror link? 

    0 124
    • jamesmark
      KenMitchell

      Hi James ( @jamesmark), 


       


      Welcome to the community.  I didn't have any problem when I tried just now.  I'm not sure where MT hosts their back-end servers but they seem to go down for maintenance at various times but come back within a few minutes. 


       


      Ken

      • September 19, 2019
  • markflip
    Contributor - Level 3
    2019-09-18

    Hello, I've seen this topic come up a bit with similar requests for nova system but I don't see a current thread so I'm starting a new one. I bought a G system about 6 or more years ago and found it pretty deep to fully understand and at the time I just set it in a box and opted for my analog pedal rig that I had built. I recently joined a new band playing all original music and I felt it was time for a change of my tone and pulled out the G system again. 

    I have to say thank you to Laird and his incredibly useful and way overachieved (in a good way) unofficial manual, I now feel I have a pretty good grasp of whats going on in that thing. I have it connected the 4 cable method through the preamp loop on my fender blues deville 4x10 amp and it sounds really fricken good.

    Here's the problem, the band I play in has a drummer with an electronic kit and he keeps pushing for total volume control of our entire band so he is anti amps on stage. I tried to push back as much as possible but I am seeing the merit of not having to lug that amp from show to show. There is also a lot of new equipment out there and I was wondering if anybody has a good combination of a preamp and amp/cab simulators that could be wired in the 4 cable manor on the G so that the final output goes straight to a PA with no actual amp producing sound on stage?

    The way I would see this happening is that I would have a preamp pedal running through the insert loop on the G, then the out of the G would go into an amp/cab simulator that would go to the PA. Ideally the simulator would have XLR outputs? Does such a thing exist? And to take it one more step, I would like to go stereo out so I may have to have 2 identical amp/cab simulators.

    Does anyone have any successful experience with a setup like this and any hardware recommendations would also be greatly appreciated.

    Thanks in advance!

     

     

    read more...
    0 214
    • markflip
      markflip

      Don't everybody rush in all at once here! Take turns please?

      • September 22, 2019
    • markflip
      DaveMorrison

      @markflip 


      The Sansamp's amp simulation is pretty good. I've used one forever.

      • September 22, 2019
    • markflip
      markflip

      Well I was hoping to have more feedback from the community but I spent a lot of time researching preamps and I found one that I think will be ideal. I wanted to share my find incase this question comes up again.


      I purchased a https://www.two-notes.com/le-clean preamp today and once I get it in and hooked up and tweaked I will report back. I have high hopes that this will be the ultimate solution.


      Two-notes makes several preamp models, I went with the le-clean because it's said to mimic American style tube amps and I am trying to replace a Fender Blues Deville 4x10 combo.


      What sold me on the two-notes is a couple things;



      • There is an effects loop that is inserted after the preamp

        • I plan to connect the send on the G to the input on the Pre, the out on the Pre to the return on the G, the out on the G to the return on the Pre, then go XLR out of the Pre into the mixer, Viola the 4 cable method!


      • There is a cabinet simulator (preset for the model, no adjustment) after the fx loop return

        • this is a good starting point to have amp like sound with only one device

        • They also have a software driven cabinet simulator that can be inserted after the le-clean as an upgrade down the line (if needed)


      • The preamp is 2 channel and it can be selected through MIDI commands

        • both channels are true tube circuitry!



      I also looked at the https://www.effectrode.com/products/effects-pedals/blackbird-vacuum-tube-preamp/ but the price is a bit more than I was willing to dish out at this time. I would also need more hardware to get the cabinet emulation and DI to the mixer. If you have the cash though this is an awesome unit. It is also 2 channel and there is a channel select jack that you could wire into the relays on the G...


       


       

      • September 23, 2019
  • jackftce
    Contributor - Level 1
    2019-09-18

    Using my Hypergravity Mini seems to increase feedback through PA with both Fender and Taylor A/E guitars. Is there a toneprint download that can help minimize this?

    0 156
  • Rufus1969
    Contributor - Level 2
    2019-09-16

    I bought one and I think its faulty. Playing thru the effects loop and it distorts when I strum. That can't be right can it? Anyone got any ideas? 

    0 261
    • Rufus1969
      macfilipe

      Sounds like your FX loop might be too hot for the Afterglow.


      Try plugging your guitar directly into the Afterglow, going straight to the front end of the amp, on a clean sound. If it stays clean even with hard strumming, it's the FX loop.


      Check if your FX loop has a level setting (something like -10dBV / +4dBU), and if it does, use the lower one.


      Hope this helps.

      • September 16, 2019
    • Rufus1969
      Rufus1969

      So back it went. Money back but I am somewhat disappointed. The fella in the shop said these cheaper pedals can do that, ie distort. Well it's not fit for purpose is it then!

      • September 16, 2019
  • Alex_Zero
    Contributor - Level 2
    2019-09-11

    I purchased the TC Electronics Finalizer App for $99 on 23 August. On 24 August I raised an issue with the TC Electronics service team. as the application would not work at all on my PC.

    It is now two weeks later and this is still not working. I have exchanged numerous emails with Pedro Rodrigues at MusicTribe and I have asked for a refund multiple times. This is not acceptable.

    Pay me my refund TC Electronics.

    read more...
    1 347
    • Alex_Zero
      TC-Claus

      Hi Alex,


      Please PM me with details about this issue and I'll do my very best to help You.

      • September 23, 2019
    • Alex_Zero
      Euge1

      Hi, I'm in exactly the same position and cannot get a proper response from support. Pedro has responded but not answered the question. I cannot use the cloud as it says my ID and email address are incorrect. How can that be if i can log in hear. There is no option on the app to retreive a forgotten password if that was the case either. It's very poor service.

      • September 23, 2019
    • Alex_Zero
      TC-Claus

      Hi efryan,


      When You click on Login to Analyzer here: https://finalizer.com/analyzer


      there is an option to click on "Forgot Your Password?" Have You tried that ?

      • September 24, 2019
  • Dcatherwood
    Contributor - Level 1
    2019-09-11

    Question for the group - does daisy chaining the RS series of cabinets (e.g. RS210, RS212, etc.) benefit from a 3-conductor cable vs 2-conductor to power the tweets? The GK RB1001 I have does, since it’s bi-amped. Driving the cabinets now with an RH750.

    read more...
    0 129
  • glento
    Contributor - Level 1
    2019-09-09

    I downloaded the Finalizer program but cannot get it to work with my Apollo 16mkll thunderbolt interface. Seems like the software will not communicate with the hardware. I can't change sample rates and get the sample rate mismatch flag when I load an audio file.

    read more...
    0 373
    • glento
      TC-Claus

      Hi glento,


      Try switching the sample rate from Original to the supported 44.1kHz or 48kHz ?


      All the best from


      Claus

      • September 24, 2019
  • brachem
    Contributor - Level 1
    2019-09-08

    Does adding an external Tap Tempo pedal to the stereo jack only work with the newest version of the Flasback 2 pedal or does it even work with older versions of it?

    0 187
    • brachem
      TC-Mike

      Flashback 2 works with external tap switch in all versions. (note: you need to enable it in the toneprint app!/ "global product settings" tab when Fb2 is connected to editor and you edit any template)


      latest 1.2. service update will also include the option to use internal tap tempo mode, if MASH functionality is disabled in the Toneprint app..


      1.2 firmware update will be relreased later this week... 


      Best, Mike

      • September 23, 2019
    • brachem
      msengers

      looking forware to the new firmware. Makes the Flashback 2 perfect. No external tap pedal needed and stereo delay (I guess)

      • October 1, 2019
  • nixx
    Super Contributor - Level 2
    2019-09-06

    It seems that if TC Electronic won't update their TC Near software, all users of Konnekt (and Impact Twin) audio interfaces are out of luck and won't be able to use their hardware with the upcoming version of macOS. If I'm not mistaken, macOS Catalina will support only 64-bit apps - and TC Near Control Panel is 32-bit

    Is there any chance TC Electronic will update TC Near to support for 64-bit only operating systems? It would be a shame to have all those killer audio interfaces bricked...

    read more...
    10 7,332
    • nixx
      yann_

      I agree. but it seems they are not involved in this forum at all. 


      I think it's more for users, cause if you check most posts don't even get replies, sometimes if ure lucky a user will help you out but Tc's staff have not seen em around. 

      • October 3, 2019
    • nixx
      lello88

      Hello, updated yesterday to OSX Catalina, my  Impact Twin unfortunately does not work, I sent an email to the support, I hope to receive an email from the support, greetings

       


      • October 10, 2019
    • nixx
      LB

      I own a Studio Konnekt 48 and I really love that interface. It is perfect for my recording needs, sounds great and has reasonable latencies. 


      It is a real shame, that TC Electronics don't support this fairly new product. In a time where everybody's talking about the environment and saving resources, it just doesn't seem right that I have to throw away a perfectly good (great actually...) audio interface, just because I wish to upgrade the software on my Mac. 


      Next time I buy an audio product I guess I will spend some time checking out the "end of life" policies of the manufaturer. The software support should last at least as long as the life expectancy of the hardware product.


      I always thought of TC Electronics as a serious and trustworthy manufacturer, but this time you have really let me down...


       


       

      • October 14, 2019
    • nixx
      LB

      I wonder if TC even exits anymore, after they have been ackquired by Behringer.. 

      • November 25, 2019
    • nixx
      hakanbahadir

      I have the same problem, luckily I was the Beta tester of Catalina and could be able to turn back to previous version. I can not use Catalina just because of this hardware and it is not acceptable.


      TC please answer us with a solution.


      Hakan

      • December 12, 2019
  • pedrolpd
    Contributor - Level 1
    2019-09-06
    0 114
Go to page