TC Electronic

TC Electronic

Brand

TC Electronic

299,403 members
183,148 posts
  • cicolino
    Contributor - Level 1
    2019-10-30

    Hi.

    My OS:Windows 10

    If I'm on Asio Driver (Uad Apollo MK2-Thunderbold) and start to jumping true the Reference file, I get Error - Device error: Can't create i/o buffers...Show device preferences . This happens with original audio file too, but not so quick.

    If I'm on Windows Audi driver (UAD WDM driver), I have not this problem but app reacting very, very slow.

    Please help

    read more...
    0 201
    • cicolino
      TC-Claus

      Hi cicolino,


      Have You tried to increase the buffer size for Your UAD interface and making sure it's set to the same in the Finalizer App ? (Preferences/Audio) and don't go below 256 ...


      All the best from


      Claus

      • November 3, 2019
  • synthlink
    Contributor - Level 1
    2019-10-27

    I own an old TC 1210. I love this machine but it's old and it needs some repairs.
    As I've an electronic tech background, I can fix it myself.
    Does somebody knows where I could find the service manual or schematics ?

    0 157
  • mzx0205
    Contributor - Level 1
    2019-10-25

    I have a TC 6000 MK2 mastering.

    How can I purchase a stereo reverberation license?

    0 161
  • nxenakis
    Contributor - Level 1
    2019-10-25

    My version of this unit has a preset for the Looper function and the effects do not work while using the Looper. I have seen videos where this would work. How can I find info on my particular model? The manual is pretty vague.  Especially when trying to use the Store function. 

    read more...
    0 157
    • nxenakis
      TC-Mike

      When in Looper mode the FB 2 X4 cannot use delays as on top. This is due to the complexity/processing power required for  the new delay algos. The Fb2 has new Tape/BBB models, true dual delays + a polyphonic octaver used for the Crystal delay type . The Fb 1X4 could use the current delay settings on top of the looper.


      With regards to storing you use the righ spring loaded  toggle switch and pull it down to store the current settings to the selected preset location(A,B or C)  .Pulling the toggle switch up will change bank, so you get 3 presets more with direct access.


      Pressing and holding the TAP tempo switch will shift banks, indicated by the LED color (green,red) 


      tip when working with the Toneprint app: 


      while working with the editor, you can store your toneprints settings directly to a preset memeory location, without having to store to a toneprint slot first.


      Cheers,


      Mike


       

      • October 27, 2019
  • mzx0205
    Contributor - Level 1
    2019-10-23

    I have a TC 6000 MK2 mastering.

    How can I purchase a stereo reverberation license?

    0 182
  • chrismilne
    Contributor - Level 3
    2019-10-22

    Seems odd there are no U2/The Edge presets for the 2290 DT plugin...he's always mentioned in every review as the signature sound.

    Can you create/share your own presets?  When did TC start with this Music Tribe site, it's confusing.

    read more...
    1 296
    • chrismilne
      yann_

      since they became part of Behringer... 

      • November 24, 2019
    • chrismilne
      TC-Claus

      Hi chrismilne,


      You can easily share presets with others Presets are located here:


      Windows
      C:\Users\"username"\Documents\TC Electronic\TC 2290\


      macOS
      Macintosh HD/Users/"username"/Library/Audio/Presets/TC Electronic/TC 2290/


      I'll ask around for U2 - The Edge Presets!


      All the best from


      Claus


       

      • November 28, 2019
  • Steve52
    Contributor - Level 1
    2019-10-22

    Is there anywhere I can get genuine technical help from TC electronic? This forum just seems to be people with problems talking to each other!  I've updated amp software and now can't send any toneprints (from laptop via USB).  Toneprints that were previously available are asking for amp software version 2.0 - where/what is this?  I'm told that TC have been taken over by Behringer, but they also use this wierd MusicTribe thing instead of a genuine technical support website.  Grateful for any help...

    read more...
    0 361
  • TBoneSlort
    Contributor - Level 3
    2019-10-21

    It started when I downloaded a the newest Toneprint app to my MacBook Pro. I wanted to reload the default setting No3 into my HOF2. Not only would it not load in any of my 3 Toneprint slots, there was no sound comming from the pedal untill I put in another Toneprint. I tried from both my iPhone and my laptop to no avail. Not only that, now my mash does not work, when I try to engage it, the pedal shuts off.

    Any ideas, do I need to install new firmware?

    Thanks in advance.

     

    read more...
    0 331
    • TBoneSlort
      TC-Mike

      Hi T-Bone,


      default Toneprint 3 for the Hof2  has the input level mapped to MASH switch, so unless you holds down the foot switch, you won't hear any signal !! this is not a bug, it is a feature   to do swellls.


      toneprint 3 hof2.PNG


      Best,


      Mike

      • October 27, 2019
    • TBoneSlort
      TC-Mike

      regarding MASH not working, please check that you haven't disabled it via the editor--> 


      MASH switch can be enabled/disable under the Product settings tab of the Toneprint app! 


      hof2 mash active.PNG

      • October 27, 2019
    • TBoneSlort
      TBoneSlort

      Thanks for your input TC Mike, but unfortunatly the Mash switch is indeed on and as soon as I touch the Mash to engage, the unit stuts off.

      • October 28, 2019
    • TBoneSlort
      TC-Mike

      Hi TBone,


      can you elaborate on this?" the unit stuts off."   Does it power cycle and restarts if MASH is engaged ?


      Please let us know the steps to reproduce! 


      also does this only happen on this particular TP slot where you stored default toneprint 3 or does the unit shuts off everytime when MASH is used regardless of selector position?


      Cheers,


      Mike


       

      • October 28, 2019
    • TBoneSlort
      TBoneSlort

      Hi Mike thanks for the follow up.


      None of the TP slots work if I load them with the default No.3 TP setting.


      And the Mash botton, when engaged, turns off the pedal.


      So in other words the pedal acts like a normal non mash pedal. When the switch is engaed the pedal is on, touch it again and the unit shuts off. This happens across the board, no matter which setting is selected, TP et al.


      My HOF2 was working perfectly untill I started using the newest TP app. Unfortunatly the pedal is just off warenty, I purchased it early October last year. 


       

      • October 29, 2019
  • coombah
    Contributor - Level 1
    2019-10-21

    Light comes on but unit does not show any presets.Tried reset but nothing happens.Any ideas?

    0 134
  • Elvisg10
    Contributor - Level 1
    2019-10-21

    I have a nova system, it's great, but my tuner is not working, i put him in the frequence 440hz, but keep out of tune. I have made the update and the problem continue. 

    How can I fix this ? 

    0 130
    • Elvisg10
      TC-Mike

      Hi Elvis,


      pleaese provide more details on the issue! What isn't working with the tuner exactly? 


      " i put him in the frequence 440hz, but keep out of tune." -could you re-phrase this and be a bit more detailed as to what happens?  Is it an issue with the reference pitch? is the pitch estimate/display not working?? 


      Could you maybe write the step it takes to reproduce the issue you experience? 


      thank you,


      Mike


       

      • October 21, 2019
Go to page