TC Helicon

TC Helicon

Brand

TC Helicon

284,888 members
166,740 posts
  • New
    Arni
    Newcomer - Level 1
    2020-12-04

    Hello, I was wondering if you could use the headphone port as your main out put? So Use a cable from the headphone output to your recoring device, amp, or in my case looper. Is there any reason this would not work? will the quality be worse?

    0 63
    • Arni
      DavidKnighton Hello Arni Olafsson,
      In theory, this 'could' work, however you have to bear in mind the headphone port is a stereo output, not a mono output. If you were to plug it into a mono input on your looper, it might sound funny. Also, headphone outputs are designed to see a specific impedance load on them. Plugging them into an instrument input may have some drawbacks. Realistically, you should be using the dedicated output of your device instead of the headphone output. Simply put, it's called a headphone output because it's designed for headphones.
      • December 4, 2020
  • New
    Larry2
    Newcomer - Level 1
    2020-12-04

    I am using a Perform VK in a live situation with a 5 piece band without an instrument plugged directly just using the onboard mic. It performs well in most situations but I need to know if there are any specific mic techniques or other tips to obtain a better overall result. 

    Thanks,

    Steve

     

    read more...
    0 53
    • Larry2
      PedroRodrigues Hi Larry, you have a few tips on the manual that you can check but as an example you can use the combination of the built-in Room Sense microphone and music coming into the AUX input to automatically pick the right key/scale for the harmony voices, you will need to have a chorded instrument near the Room Sense mic and/or music with chord information coming into the AUX input for this to work. Please follow the link below to access the manual for this unit https://www.tc-helicon.com/tchelicon/product?modelCode=P0DEE. Thank you
      • December 4, 2020
  • New
    Lui66
    Newcomer - Level 1
    2020-12-03

    Hi.

    I have a problem with my new new vl3x and I am searching for a solution. Maybe you can help.

    I am Looping.

    Im doing a loop on track A. Then a loop on track B (starts anywhere in the middle of A). Both with in=guitar. A and B plays together. When track B repeats, there is always a loud crack/noise. Is there maybe a kind of a crossfader parameter, which I didnt see?

    Like this, one can not play live with the vl3x.

    Thanks in advance

    Regardes

    Lui

     

    read more...
    0 56
  • New
    TC Helicon
    Triber Moderator
    2020-12-03

    MP-85

    - bit.ly/TC-Helicon-MP-85

    Product Video: https://www.youtube.com/watch?v=7P0yOl-mo-w&feature=youtu.be

    This is what every singer deserves – a microphone engineered for the sonic realities of modern vocal performance and simple one button control of TC Helicon vocal effects

     

    #TCHelicon #MP85 #Microphone #DynamicMicrophone

    read more...
    0 627
    • TC Helicon
      BobSmith682176 What does this offer that the MP76 didn't as i only see one button and is the 76 discontinued ?
      • December 14, 2020
    • TC Helicon
      Lucy77 When will the MP 85 be released in the United States? I have been looking for it everywhere
      • February 28, 2021
    • TC Helicon
      DannyG Board Admins, can you answer the above 2 questions? I compared specifications from Hellicon, and this appears to be the exact same as the MP-75. We'll wait for Board Admin or Helicon reply....
      • April 17, 2021
    • TC Helicon
      BobSmith682176

      the 76 doesn't seem to be for sale anymore i'd like to know why ? have there been complaints, we have bought all the Voicelive linked mic's be nice to know if its been upgraded oran upgraded version with the 3 switches is on the way, but this looks like a down grade back to a single switch?

      • April 19, 2021
      • TC Helicon New Product Release: MP-85
        darkdama Hi. im not from tc helicon but I have bought two MP mics and both are giving me problems and they dont work now, one of them I don`t use because it gives me electric shock in my lips...lol
        • Feb 23
  • New
    Future2
    Newcomer - Level 1
    2020-12-02

    Die GoXLR Serie ist nicht nur für die Broadcast Szene interessant. Auch für die Gaming-Szene öffnen sich ganz neue Möglichkeiten.

    Beispielsweis meine beiden Söhne, sehr PC affin in unterschiedlichen Richtungen sind, waren auf der Suche nach einen kleinen Mixer. Er sollte eine einfache Anbindung am PC haben, die verschiedenen Audioquellen verwalten können in Richtng Mikrofon, Kopfhörer, Lautsprecherboxen, Subwoofer. Er sollte klein sein, typische Feature´s in Sachen Klaneistellungen haben und ein bisschen was für Auge bieten.

    All dies bietet der GoXLR mini.

    Nach längeren Arbeiten damit fiel jedoch auf, dass noch ein paar Möglichkeiten fehlen, um das Ganze abzurunden. All die Leute aus der PC-Gaming-Szene, die damit gearbeitet haben sagen übereinstimmend:

    - Mind. noch 2 Fader/Kanäle mehr

    - 1 separater Lautstärke Poti vorne neben dem Kopfhörer-Ausgang nur für den Kopfhörer

    - 1 zusätzlicher Lineout für den Anschluss eines Subwoofers

    - Alle Audio-Ausgänge mit einen EQ versehen, wie der für den Mic-Eingang

    - Software Schnittstelle zur Einbindung eines USB-wireless Headset, um beispielsweise den Kopfhörerausgang auf das Headset zu routen

    - eventuell eine Bluetooth Anbindung an Smartphones/Tables

     

    Sollten diese Ereweiterungen nach Vorgabe des GoXLR mini vorhanden sein, wäre dies der perfekte Mixer für die Gaming Szene und würde wohl einen regelrechten Boom auslösen. 

    Das Mangament / Entwickler-Team von TC-Helicon sollten diese Gedanken mal aufnehmen. Der Erfolg wäre garantiert. Viele der Gamer warten sehnsüchtig auf die Innovation...

    Hier mal ein Beispiel für die Gestaltung.

    read more...
    1 102
  • New
    DaveBarnes
    Contributor - Level 1
    2020-12-02

    TC Helicon voice live 3 extreme |

     

    Regrettably I reset my VL3X to factory settings thus losing the FX Automation preset of "Amazing Grace". Reading through these discussions I read that Pastor Leroy Wlliams also had had the same problem 2020-07-08.

     

    I couldn't find any reply, so looked Online and found :-

     

    https://musictribecommunity.powerappsportals.com/en-us/knowledgebase/article/5132. It explains that the preset is not embedded in the firmware because it would quadruple the size.

     

    A download link was made available via DropBox, but this no longer works. I would really appreciate it if this download could be reupped or made available to me in some other way.

     

     

     

    read more...
    1 265
    • DaveBarnes
      PedroRodrigues Hi Dave, please be aware that VL3X ships with included FX Automation for "Amazing Grace" for male vocals. The preset will be available for free download via VoiceSupport.
      • December 3, 2020
    • DaveBarnes
      DaveBarnes Thanks Pedro for responding so quickly. I'm afraid I don't know how to find the preset on VoiceSupport 2. Can't find it in the Cloud listing and Find Preset has no result if I put in "Amazing Grace". I'm old,this is new to me and I'm clearly I've got a lot top learn
      • December 3, 2020
    • DaveBarnes
      DaveBarnes Sorry to be tedious but I have looked at numerous videos and tutorials but am still unable to find the free download for FX Automation for "Amazing Grace" for male vocals. Would it be possible to send me the link please or clarify the steps required to download via Voice Support 2?
      • December 4, 2020
    • DaveBarnes
      PedroRodrigues Hi Dave, Its a pleasure to help, please follow the link below to download VOICESUPPORT https://www.tc-helicon.com/tchelicon/product?modelCode=P0CMP
      • December 4, 2020
      • Amazing Grace FX Automation preset  lost in Factory reset
        DaveBarnes Hi Pedro
        I followed the link you just sent and have downloaded Voice Support 2 for the second time and failed again to find the FX Automation preset of "Amazing Grace" .

        It does not seem to be listed in VL3X Presets: 264/500.

        Preset 10 is SING-A-SYNTH and not "Amazing Grace" Can you please tell me where I can find it?

        Regards
        Dave
        • 1
        • ·
        • December 4, 2020
      • Amazing Grace FX Automation preset  lost in Factory reset
        PedroRodrigues Hi Dave please select Preset 10 and press the HIT footswitch, which in this Preset is associated with the Backing Track playback function, so it is shown as “Track” in the display.
        You should now hear “Amazing Grace
        • December 4, 2020
      • Amazing Grace FX Automation preset  lost in Factory reset
        DaveBarnes Hi Pedro. I have faithfully followed all your suggestions several times without success. The FX Automation preset of "Amazing Grace" is not included in VL3X Presets: 264/500 and does not seem to be on my machine any more. Can you please or anyone else able to, who reads this repost the .pkg file suggested as a solution in Knowledge Base Home . https://musictribecommunity.powerappsportals.com/en-us/knowledgebase/article/5132. The link no longer works.
        • December 5, 2020
    • DaveBarnes
      reudischer Hi Dave, hi Pedro, I have the same problem. I bought a new VL3X and the automation preset of amazing grace is not included ond preset 10 (very disappointing). It would be nice, if someone coud send a new link for the download. Thank you and regards :-)
      • February 3, 2021
  • New
    OldManZero
    Newcomer - Level 1
    2020-12-02

    I recently came across a VoicePro rack unit and know that there was a 2.0 of the computer software (Vyzor) that was released for it in early 2009.  I can't seem to find a copy of it anywhere on the internet.  Additionally, there is zero mention of the VoicePro rack unit anywhere on TC-Helicon's site and no support documents are available.  

     

    Is there a way to get a copy of that software?  I know there were issues with an outsourced company (Psicraft) but they are also out of business and have no website or active links that host the software.  

     

    Any insight as to how this software may be acquired?  Thanks,

     

    - Marc

    read more...
    0 222
    • OldManZero
      PedroRodrigues Hi Marc, please follow the link below to access the Vyzor 2.0 for Mac and Win https://wsi.li/dl/Khpx6rhM44aQTmjcL/
      • December 3, 2020
      • Vyzor 2.0 Software for TC-Helicon VoicePro
        OldManZero Thank you, Pedro. However, this appears to be the TC Electronic G-System version of the software and not the TC-Helicon Voice System version which I need.
        • 1
        • ·
        • December 3, 2020
      • Vyzor 2.0 Software for TC-Helicon VoicePro
        OldManZero
        • 1
        • ·
        • December 3, 2020
      • Vyzor 2.0 Software for TC-Helicon VoicePro
        PedroRodrigues Hi Marc, I'm sorry, but unfortunately the VoicePro is a legacy for some time unit so its no easy to search for any resources for this unit. I will try to source it on your database . Thank you
        • December 4, 2020
      • Vyzor 2.0 Software for TC-Helicon VoicePro
        OldManZero Did you have any luck finding this? Thanks.
        • December 22, 2020
    • OldManZero
      Erra I have Vyzor for Voice Pro, the problem is that it was free but you had to go to Psycraft website and register the product to get a password. Psycraft is offline and Wayback Machine doesn't allow to retrieve the password. So no password, and since it was free no cracks no passwords anywhere. Vyzor was a part of Midi Quest, which is still available to purchase, version 11 doesn't work with Voice Pro, up to date version 12 works but it is ridiculous expensive for what it does. So unless someone can manage a password for Vyzor which was free at the time, no editor is available, unless programming another software alternatives such as CTRLR
      • January 1, 2021
  • New
    chess200
    Newcomer - Level 1
    2020-12-01

    Trying to find out the difference TC-Helicon VoiceLive 3 and TC-Helicon VoiceLive 3 extreme. For purchase.

    0 397
    • chess200
      PedroRodrigues Hi Chris, please be aware that the between the Voice Live 3 and the Voice Live 3 Extreme, the core layout of the pedal is identical and the top portion shows the same features and for the most part the features don’t either.
      Generally, these pedal works in “layers,” with a dedicated footswitch to change between controls for vocal effects, guitar effects and the looper, and the user can store one setup in each layer, so a set of vocal effects and guitar effects, and an associated loop in a Preset.
      There are 250 factory presets and room for 250 more of your own.
      The amount of storage space is one of the biggest differences in the Extreme version.
      The 4 GB storage space on the Voice Live 3 has been quadrupled to 16 GB on the Voice Live 3 Extreme, this is particularly useful because the Voice Live 3 Extreme adds the ability to store backing tracks.
      You can import any backing tracks from a USB stick and choose to associate one of them with a Preset instead of a loop, and then when you switch to the looper layer the pedal will go into backing track playback mode instead.
      For more information please follow the link below to access a video for the Voice Live 3 and the Voice Live 3 Extreme:

      https://youtu.be/6wl9B6Rg5f4

      https://www.youtube.com/watch?v=jHGaaqeO3ew
      • December 1, 2020
    • chess200
      voodoofuzz IMHO, the s/h value of these units is almost identical yet the extreme has so many more advantages - it would be crazy to choose the VL over the VLX.!
      • April 11, 2021
  • New
    Dragonfly1
    Newcomer - Level 1
    2020-11-29

    I've been using my acoustic with my VL3 into a PA.  I decided to try using my strat with the VL3 into my Fender DR, but the unit creates a loud, high-frequency hiss even with the amps and cabinet simulations turned off.  It doesn't matter what else I adjust, it creates a constant hiss.  It's not as loud with my solid state amp, but still very noticeable.

    Anybody experience such noise issues?

    read more...
    1 51
    • Dragonfly1
      PedroRodrigues Hi Nick, please be aware that the VL3 was designed to be connected directly to a Mixing desk or to a PA as you mentioned. When you use the output connecting Guitar TRUH the output signal does not transport any of the effects via 1/4“ TRS phone jack.
      • November 30, 2020
  • New
    Rycroft
    Newcomer - Level 1
    2020-11-28

    ok,ok help me ....

    SO I wanna hear the varoius sounds of the MET on my voicelive 3.

    What have I missed..?Turn MET on selected the instrument I wanna Hear.... Get the Flashy Flashy thing... Thats Nice...Guitar and Voice, Hear great, Sounds real sexy..... How come I cant hear the MET...  Mute is NOT on, just in case youre asking...LOL

     Is there a hidden volume button for the Met  anywhere?

    Cheers

     

     

    read more...
    0 62
    • Rycroft
      PetGerbil Have you looked in the "mix" section.? (Twiddle one of the four small knobs should bring it up) Depending on how you are listening to it ie. headphones or main outputs, you can set whether it comes out of just the headphones or both phones and outputs. In the "mix" part you can set their relative volumes and what goes where,
      • November 28, 2020
    • Rycroft
      Rycroft Thank you for quick reply... Checked it out, still nuffin I'm sorry to say...
      • November 28, 2020
    • Rycroft
      Rycroft Pet Gerbil: Thank you problem resolved..... Cable output not connected correctly...... But your info helped a lot....
      • November 28, 2020
Go to page