Highlighted
Contributor - Level 2

Lake contour 26 pro

I have an old contour processor that failed a firmware update and now doesn't want to show up in the controller (version 5.8 on windows 10) any advice on how to fix? The processor is in great shape and for light DJing works really well. The processor is connected to an ASUS router via an Ethernet cable. It is not showing any digits on the front display and pressing any of the front buttons does not creat a response. Any help is appreciated. 

Danmustard Contributor - Level 2 2019-12-02

2019-12-02

Lake contour 26 pro

I have an old contour processor that failed a firmware update and now doesn't want to show up in the controller (version 5.8 on windows 10) any advice on how to fix? The processor is in great shape and for light DJing works really well. The processor is connected to an ASUS router via an Ethernet cable. It is not showing any digits on the front display and pressing any of the front buttons does not creat a response. Any help is appreciated. 

  • 0 Kudos
  • 2 Replies
  • Reply
Highlighted
Community Manager

Re: Lake contour 26 pro

Hi @Danmustard 

 

I am not quite as familiar with the older Lake contour so not 100% sure if this will work, but it could be worth trying a safe mode firmware update on the unit. This is the process for the newer PLM and LM series, hopefully it will work on the older product!

 

Here is a youtube link to the procedure...

https://www.youtube.com/watch?v=BW-FRGEZcYg&t=69s

 

Alexander Lane | Triber, Music Tribe Did you find my post helpful? Give kudos or mark it as a solution! Community Guidelines | FAQs
Highlighted
Contributor - Level 2

Re: Lake contour 26 pro

Hey Alex, 

Unfortunately its still not showing up so I cannot follow the instructions... 

Best, 

-Dan