Live Sound

Join fellow sound engineers and discuss everything about live sound. Talk about your favorite experiences, the gear you use, anything!

Highlighted

Must be loosing my mind on patch for FOH and Mon split - any help appreciated

Contributor - Level 2
I am having a brain freeze here, changing a bit for a upcoming tour and needed some help on the routing patch and settings

PHYSICAL set up

X32 Rack for Monitors and FOH

SR - In Case --- SD8 set for outs 1-8
Mon 1 used SR
Mon 2 used SR
Mon 3
Mon 4
Out 5 - Matrix Mix Mono for satellites
Out 6 - MC Sub mix on Stage R
Out 7 /r for possible external house PAand 8 L/R on Stage Right

Center Behind Drums --- SD 16 set for Outs 9 - 16
Mon 9
Mon 10
Mon 11
Mon 12
Mon 13 Matrix for Side Fill
Mon 14 Matrix for Side Fill
Outs 15/16 L

SL - In Case --- SD8 set for outs 1-8
Mon 1
Mon 2
Mon 3 used SL
Mon 4 used SL
Out 5 - Matrix Mix Mono for satellites
Out 6 - MC Sub mix on Stage R
Out 7 /r for possible external house PA and 8 L/R on Stage Right

All of this works fine as I have been using it BUT what I want to do is to add a a X32 CORE for a FOH mix separate from the Rack, the issue I am having is the outputs from the FOH and how to assign the routing to get back to the SD stage boxes

As of now I can set the HOME inputs to share the inputs and using gain split to AES50 a or b depending on which I place first but I cannot get sound to pass from mix iPad to the outputs on the SD's

What am I forgetting

Thank you

so again Rack 1 has
Core FOH desired
and
Rack Monitors desired

Racks 2 has SD 8 channels 1-8 and outs 1-8
Rack 3 has SD 16 channels 9 - 24 and outs 9 - 16
Rack 4 has SD 8 Channels 25 - 32 and outs 1 - 8
Tags (1)
Conversation Stats
  • 0
  • Replies
  • 75
  • Views
  • 0
  • Kudos Given
  • 1
  • Contributor