Highlighted
Contributor - Level 2

Functionality for Subs on Aux, Output Delay, Xover Filters

1st:
Xover filters on any output
Aux Master tied to LR fader
.5 or 1ms increments of delay on all outputs

2nd:
Consistancy between PC/Mac apps, iPad, Android
iPhone app for monitor mixes only like X32
option of .5db increments on fader movements
Youtube.com/MusiciansPro • Facebook.com/groups/BehringerXair • Facebook.com/groups/MidasBehringerPro
Tags (1)
SeanThomas Contributor - Level 2 2015-04-23

2015-04-23

Functionality for Subs on Aux, Output Delay, Xover Filters

1st:
Xover filters on any output
Aux Master tied to LR fader
.5 or 1ms increments of delay on all outputs

2nd:
Consistancy between PC/Mac apps, iPad, Android
iPhone app for monitor mixes only like X32
option of .5db increments on fader movements

  • 0 Kudos
  • 8 Replies
  • Reply
Highlighted
Contributor - Level 1

Re: Functionality for Subs on Aux, Output Delay, Xover Filters

Sean Thomas;47844 wrote:
iPhone app for monitor mixes only like X32


This is essential!!
Highlighted
Contributor - Level 2

Re: Functionality for Subs on Aux, Output Delay, Xover Filters

I'd love to see a MONO mode where it turns the left output into a 'main' output and the right output into a 'sub' out.
Then allow for a crossover on the master mix; it'd be easier than giving up an Aux and doing a bunch of EQ trickery to send SUB frequencies to that Aux bus.
Highlighted
Contributor - Level 2

Re: Functionality for Subs on Aux, Output Delay, Xover Filters

Jim Rodgers;48065 wrote:
I'd love to see a MONO mode where it turns the left output into a 'main' output and the right output into a 'sub' out.
Then allow for a crossover on the master mix; it'd be easier than giving up an Aux and doing a bunch of EQ trickery to send SUB frequencies to that Aux bus.

YES! This would be pretty awesome.
Allen D. Tate, AVL Event Services LLP http://www.avleventservices.com/
Highlighted
Contributor - Level 2

Re: Functionality for Subs on Aux, Output Delay, Xover Filters

Allen D. Tate;48176 wrote:
YES! This would be pretty awesome.


+1 to that!
In that mode, maybe split the mains into seperate faders and make the Main "left" fader move both of the them like a DCA and the Sub "right" fader move independently so the relative mix between mains and subs could be dialed in then the total mix adjusted with one fader (the Main).
Very Awesome indeed!!
Highlighted
Contributor - Level 2

Re: Functionality for Subs on Aux, Output Delay, Xover Filters

While we're talking having faders for L and R on mains, that's just nice to have always. Allows room tweaking, stereo record/ mono PA, etc. While we're at it, how about consistent naming. On the routing page they're called Aux 1-6 but the buttons are Bus 1-6. I'm assuming you're running the bus out on the Main send so you don't have to adjust both main and subwoofer channels separately.
Highlighted
Contributor - Level 2

Re: Functionality for Subs on Aux, Output Delay, Xover Filters

Sean Thomas;47844 wrote:
1st:
Xover filters on any output
Aux Master tied to LR fader
.5 or 1ms increments of delay on all outputs

2nd:
Consistancy between PC/Mac apps, iPad, Android
iPhone app for monitor mixes only like X32
option of .5db increments on fader movements


+1 to that!

Jim Rodgers;48065 wrote:
I'd love to see a MONO mode where it turns the left output into a 'main' output and the right output into a 'sub' out.
Then allow for a crossover on the master mix; it'd be easier than giving up an Aux and doing a bunch of EQ trickery to send SUB frequencies to that Aux bus.


+1 to that!
Highlighted
Contributor - Level 2

Re: Functionality for Subs on Aux, Output Delay, Xover Filters

+1

I see where we're going with all this...
Contributor - Level 2

Re: Functionality for Subs on Aux, Output Delay, Xover Filters

Allen D. Tate;48176 wrote:
I'd love to see a MONO mode where it turns the left output into a 'main' output and the right output into a 'sub' out.
Then allow for a crossover on the master mix; it'd be easier than giving up an Aux and doing a bunch of EQ trickery to send SUB frequencies to that Aux bus.


+1 Great suggestion.