Highlighted
Contributor - Level 2

M32R with DL32 and Aux 9-16

I have a M32 connected to a DL32 and having problems setting up Aux 9 through 12 as monitor mixes.  I have mixes1 through 8 working for wedges but not able to get sound out of Aux 9 to 12 for IEM's.  I had to disconnect amps from mixes 8 and below to plug in the IEM's.

 

I'm also not able to get Aux 9 -12 working from a M32R through a DL32.

 

Any help would be appreciated

WayneLe Contributor - Level 2 2019-04-05

2019-04-05

M32R with DL32 and Aux 9-16

I have a M32 connected to a DL32 and having problems setting up Aux 9 through 12 as monitor mixes.  I have mixes1 through 8 working for wedges but not able to get sound out of Aux 9 to 12 for IEM's.  I had to disconnect amps from mixes 8 and below to plug in the IEM's.

 

I'm also not able to get Aux 9 -12 working from a M32R through a DL32.

 

Any help would be appreciated

  • 0 Kudos
  • 2 Replies
  • Reply
Highlighted
Rising Star - Level 3

Re: M32R with DL32 and Aux 9-16

@WayneLe 

Routing: "Output 1-16" Tab - Make sure the Busses you want are set to the Outputs you want. For Example: Bus 9 --> Output 9

Then under the AES50 a/b tab:

Out 9-16 --> AES50 A 9-16 (assuming you are connected to the AES A output port)

Contributor - Level 2

Re: M32R with DL32 and Aux 9-16

I will double check my M32 routing on the AES50A tab next week.  I'm assuming it's setup correctly.  

 

Thanks,