Jors Contributor - Level 2 Tuesday

Tuesday

ULM202USB + XENYX QX1002usb

Hello!

Is possible to.connect ULM202 USB receiver direct to Xenyx Usb input to get both mics working in this mixer?

And if so, which channels get the mic signal? 1 and 2?

thanks!!

  • 0 Kudos
  • 4 Replies
  • Reply

Accepted Solutions

Re: ULM202USB + XENYX QX1002usb

Contributor - Level 3

Unfortunately it seems that that description isn't quite true. There is nowhere to plug the USB dongle into that series of mixers. As mentioned previously it needs a type A USB socket to provide the correct connection or a built in receiver, neither of which the QX1002 has. It would of course work OK with the non USB ULM300 systems that come with a full sized receiver with standard analogue outputs.

Re: ULM202USB + XENYX QX1002usb

Contributor - Level 3

No unfortunately you can't since both devices are USB clients and can only be routed to a PC or another device which offers a USB server.

Re: ULM202USB + XENYX QX1002usb

Contributor - Level 2

Thanks Richard,

but here:QX1002USB

 

says its possible...

on the 'own stage with digital wireless' isn't it?

thanks!!

Re: ULM202USB + XENYX QX1002usb

Contributor - Level 3

Unfortunately it seems that that description isn't quite true. There is nowhere to plug the USB dongle into that series of mixers. As mentioned previously it needs a type A USB socket to provide the correct connection or a built in receiver, neither of which the QX1002 has. It would of course work OK with the non USB ULM300 systems that come with a full sized receiver with standard analogue outputs.

Re: ULM202USB + XENYX QX1002usb

Contributor - Level 2

Oh ok, Thank you!