Contributor - Level 2

X-Touch Overlay Template

UPDATED 2/5/19: I have added new overlays for Reaper DAW and X32 with Reaper.
check out whats in stock now.
https://store.birchwoodstudioandevents.com


UPDATED 12/28/18: With the overwhelming interest that i received in these overlays I have launched a website where you will now be able to purchase them through.

https://store.birchwoodstudioandevents.com

Thanks to everyone for all of the support.
Damon


Hey guy,

A while back I was looking for an overlay for my X-Touch with control info for the X Air. I found a few things and well it gave me a lot of good ideas. As i pondered how to do the overlay (cause i could not find one to buy) I realized i own a small sign shop and could cut it myself. so thats what i did. I also realized that many other people may would like the same thing. So if anyone is interested in having an overlay for there X-Touch printed and cut professionally please hit me up. I can design it for which ever software you want (you just have to supply me button names) or I can cut you what I did for my X-Touch to X Air.

contact@birchwoodstudioandevents.com

This is a magnetic overlay so it will not fall off. I will be doing one for my X Air soon and will start making them for people also.

https://www.dropbox.com/s/742w61z58a0vybx/JoB5PZAlR6Wc4TgC1lqPFA_thumb_f4c.jpg?dl=0

https://www.dropbox.com/s/6lhh4l65iepixtq/yrn34Ox8TD2ZSMjQ5njYYg_thumb_f4b.jpg?dl=0

https://www.dropbox.com/s/hnxpn1znf5qujo2/gTBcY3LTT8mwGj%2BkJJUaYQ_thumb_f4e.jpg?dl=0

https://www.dropbox.com/s/lakwbrddqkulq2v/1iY3rMYESEKjzdhjhO08JA_thumb_f4d.jpg?dl=0

UPDATE:
I just completed a X32 template for the board if anyone is interest. I had to do this in 2 pieces due to the glass.



https://www.dropbox.com/s/0axl302tdrb9fh0/x32%20template%20image.PNG?dl=0

thanks,
Damon
DamonPence Contributor - Level 2 2018-07-22

2018-07-22

X-Touch Overlay Template

UPDATED 2/5/19: I have added new overlays for Reaper DAW and X32 with Reaper.
check out whats in stock now.
https://store.birchwoodstudioandevents.com


UPDATED 12/28/18: With the overwhelming interest that i received in these overlays I have launched a website where you will now be able to purchase them through.

https://store.birchwoodstudioandevents.com

Thanks to everyone for all of the support.
Damon


Hey guy,

A while back I was looking for an overlay for my X-Touch with control info for the X Air. I found a few things and well it gave me a lot of good ideas. As i pondered how to do the overlay (cause i could not find one to buy) I realized i own a small sign shop and could cut it myself. so thats what i did. I also realized that many other people may would like the same thing. So if anyone is interested in having an overlay for there X-Touch printed and cut professionally please hit me up. I can design it for which ever software you want (you just have to supply me button names) or I can cut you what I did for my X-Touch to X Air.

contact@birchwoodstudioandevents.com

This is a magnetic overlay so it will not fall off. I will be doing one for my X Air soon and will start making them for people also.

https://www.dropbox.com/s/742w61z58a0vybx/JoB5PZAlR6Wc4TgC1lqPFA_thumb_f4c.jpg?dl=0

https://www.dropbox.com/s/6lhh4l65iepixtq/yrn34Ox8TD2ZSMjQ5njYYg_thumb_f4b.jpg?dl=0

https://www.dropbox.com/s/hnxpn1znf5qujo2/gTBcY3LTT8mwGj%2BkJJUaYQ_thumb_f4e.jpg?dl=0

https://www.dropbox.com/s/lakwbrddqkulq2v/1iY3rMYESEKjzdhjhO08JA_thumb_f4d.jpg?dl=0

UPDATE:
I just completed a X32 template for the board if anyone is interest. I had to do this in 2 pieces due to the glass.



https://www.dropbox.com/s/0axl302tdrb9fh0/x32%20template%20image.PNG?dl=0

thanks,
Damon

  • 0 Kudos
  • 22 Replies
  • Reply
Highlighted
Super Contributor - Level 1

Re: X-Touch Overlay Template

Damon Pence;149516 wrote:
Hey guy,

A while back I was looking for an overlay for my X-Touch with control info for the X Air. I found a few things and well it gave me a lot of good ideas. As i pondered how to do the overlay (cause i could not find one to buy) I realized i own a small sign shop and could cut it myself. so thats what i did. I also realized that many other people may would like the same thing. So if anyone is interested in having an overlay for there X-Touch printed and cut professionally please hit me up. I can design it for which ever software you want (you just have to supply me button names) or I can cut you what I did for my X-Touch to X Air.

contact@birchwoodstudioandevents.com

This is a magnetic overlay so it will not fall off. I will be doing one for my X Air soon and will start making them for people also.

https://www.dropbox.com/s/742w61z58a0vybx/JoB5PZAlR6Wc4TgC1lqPFA_thumb_f4c.jpg?dl=0

https://www.dropbox.com/s/6lhh4l65iepixtq/yrn34Ox8TD2ZSMjQ5njYYg_thumb_f4b.jpg?dl=0

https://www.dropbox.com/s/hnxpn1znf5qujo2/gTBcY3LTT8mwGj%2BkJJUaYQ_thumb_f4e.jpg?dl=0

https://www.dropbox.com/s/lakwbrddqkulq2v/1iY3rMYESEKjzdhjhO08JA_thumb_f4d.jpg?dl=0



Wondering if you have any issues with it being Magnetic? Sometimes Magnets & electronics do weird things together.

BTW, search the XR-18 forum Someone already has a template you could use for your custom designed one.

I may be interested in a template that looks something that has both XR-18 and Studio One like this:
Behringer XR18, Xtouch, PM16. PA and Recording using Studio One Pro.
Highlighted
Super Contributor - Level 2

Happy Camper. Thanks!

My newly installed XR18 overlay for the X-Touch
Logic Pro X 10.4.8, X-Touch 1.15, XR18 1.5, macOS 10.14.5|10.15.2
Highlighted
Contributor - Level 2

Re: X-Touch Overlay Template

Pat Murphy;149922 wrote:
Wondering if you have any issues with it being Magnetic? Sometimes Magnets & electronics do weird things together.

BTW, search the XR-18 forum Someone already has a template you could use for your custom designed one.




Pat,

I was worried with the same thing at first, the magnet is just strong enough to hold the template on the board but not strong enough to cause interference.

XR-18, I will check the forum and see what is out there. I have already started building the template but whats out there may be better than what i have at the moment.
Highlighted
Contributor - Level 2

Re: X-Touch Overlay Template

Chris Janton;150004 wrote:
My newly installed XR18 overlay for the X-Touch



Thank you Chris.
Highlighted
Super Contributor - Level 2

No flux capacitor kind of action happening

Scribble strips don't wiggle, far enough from anything that matters, no fuel gauge to disrupt, and, of course, no audio...

Never had magnetic interference on my MIDI channels

It's very nice and saves me from keyboard and shuffling. Wheee.

Thanks Damon!
Logic Pro X 10.4.8, X-Touch 1.15, XR18 1.5, macOS 10.14.5|10.15.2
Highlighted
Contributor - Level 3

Re: X-Touch Overlay Template

I was worried with the same thing at first, the magnet is just strong enough to hold the template on the board but not strong enough to cause interference.


Anyway the steel of the X Touch front panel will screen any magnetic fields away from internal electronic components. Smiley Wink
Highlighted
Contributor - Level 2

Re: X-Touch Overlay Template

Richard YClark;150021 wrote:
Anyway the steel of the X Touch front panel will screen any magnetic fields away from internal electronic components. Smiley Wink


Not sure I can answer this question. I can tell you I have been using it on my X-Touch for about 3 months and have not seen any issues. I used it for assisted mixing in the studio with my X32 using Logic and also used it with my XR-18 on Weddings and not had one problem.

thanks,
Damon
Highlighted
Contributor - Level 2

X air and studio one template

The number 2 Reply has it image of X air 18 and studio one template JPG. I would love to have that if you are making them.
Kenny Begun www.begunaudio.com
Highlighted
Super Contributor - Level 1

Re: X-Touch Overlay Template

Kenny Begun;152168 wrote:
The number 2 Reply has it image of X air 18 and studio one template JPG. I would love to have that if you are making them.


Sorry, All I have is the file I uploaded. I doubt it is sized correctly. I may try printing one of these out to see if I can use an Exacto knife and cut it out if it is printed on something like photo paper.
Behringer XR18, Xtouch, PM16. PA and Recording using Studio One Pro.