Highlighted

firmware 2.1 ? for turbosound IQ speakers ?

Contributor - Level 2
hi guys I just bought two IQ-15 and 2 IQ-18B speakers & i noticed that they all had firmware 1.7 so I did the firmware 1.9 upgrade on three of them then i came to my last speaker it's one of th IQ-15 and it wouldn't take the 1.9 firmware so I checked what version that is on the speaker and it shows 2.1 . OK so now the question is Where do I find the 2.1 firmware for the turbo sound speakers and if there isn't such thing how did my speaker come with it. just wondering . I just got these a few days ago Thanks
Tags (1)
7 REPLIES 7

Re: firmware 2.1 ? for turbosound IQ speakers ?

Volunteer Moderator
I’ll see what I can find.
Robert Lofgren | Did you find my post helpful? Give kudos and/or mark it as a solution!

thank you

Contributor - Level 2
thank you sir

Re: firmware 2.1 ? for turbosound IQ speakers ?

Volunteer Moderator
The v2.x firmware is for the revised hardware on the iq-platform and will not load on the original iq-series of speakers.

To the user there should be no difference between the different hardware revisions.
Robert Lofgren | Did you find my post helpful? Give kudos and/or mark it as a solution!

Future firmware updates

Contributor - Level 2
WILL this affect future firmware updates on this one speaker? just wondering

Re: firmware 2.1 ? for turbosound IQ speakers ?

Volunteer Moderator
As I understood it v1.xx is reserved for the previous hardware and v2.xx is reserved for the current hardware so if you have a mixed hardware of iq-speakers you should probably put a sticker on it to differentiate it from the others.

But I wouldn’t worry too much since there has only been one or two firmware updates for them. I’m trying to convince them that the iq should be able to automatically switch between analog and digital input depending on if it detects an ultranet signal or not.
Robert Lofgren | Did you find my post helpful? Give kudos and/or mark it as a solution!

Re: firmware 2.1 ? for turbosound IQ speakers ?

Contributor - Level 2
Hi,
I just bought 4 speakers NuQ122-AN.
Three of them show firmware 1.7. No problem with them as i can update to 1.9 according to the instructions.
The 4th speaker shows 2.0. I understand that there has been a hardware modification which needs now firmware 2.x. My question is : Where do i find firmware 2.1 which John Fry refers to (see the first post) ?

Thanks and br

Re: firmware 2.1 ? for turbosound IQ speakers ?

Contributor - Level 2
Robert Lofgren;148961 wrote:
As I understood it v1.xx is reserved for the previous hardware and v2.xx is reserved for the current hardware so if you have a mixed hardware of iq-speakers you should probably put a sticker on it to differentiate it from the others.

But I wouldn’t worry too much since there has only been one or two firmware updates for them. I’m trying to convince them that the iq should be able to automatically switch between analog and digital input depending on if it detects an ultranet signal or not.


I wish the did that. I would be nice to just plug in an xlr and have it change input.
What I did was save the settings for XLR, Ultra on channel 1, and Ultra net on channel 2. This way when I'm setting up FOH I don't have to put a certain speaker right or left.

Greg