Contributor - Level 2

X32 core edit app scene file and more

Hello, everyone, I'm new here

I have a few questions about the x32 edit and routing :

  1.  when trying to build a scene on the app when routing the input to aes50 A I don't have an option to engage phantom power from the channel?Screen Shot 2019-09-05 at 12.17.42.pngScreen Shot 2019-09-05 at 12.17.20.png
  2. where can I enable the phantom power and set the gain properly? 

this is my setup: x32 core-> aes a50 to S16 A port -> S16 B port to SD8 A aes50 input 

thanks for your help

sasi Contributor - Level 2 2019-09-05

2019-09-05

X32 core edit app scene file and more

Hello, everyone, I'm new here

I have a few questions about the x32 edit and routing :

  1.  when trying to build a scene on the app when routing the input to aes50 A I don't have an option to engage phantom power from the channel?Screen Shot 2019-09-05 at 12.17.42.pngScreen Shot 2019-09-05 at 12.17.20.png
  2. where can I enable the phantom power and set the gain properly? 

this is my setup: x32 core-> aes a50 to S16 A port -> S16 B port to SD8 A aes50 input 

thanks for your help

Volunteer Moderator

Re: X32 core edit app scene file and more

Hi @sasi 

Welcome to the forum. The reason that you are not getting the phantom control (first screenshot) is that you probably have a sync issue with your stagebox (AES50 A). If you are not connected to the physical input (eg. no sync), you won't have control of the preamp and the phantom control will not appear. Also you will only have a trim control (rather than gain control).

 

Paul Vannatto, Volunteer Forum Administrator and Moderator