As an alternative to feeding a mono signal into each Tannoy Reveal loudspeaker, you can feed a stereo signal (e.g. from an audio interface, a smart phone or an audio player) to one loudspeaker and link it to a second loudspeaker using the supplied 3.5 mm cable, thereby creating a stereo pair.
To do so, proceed as follows:
Connect your line level signal source to the “IN” jack in the AUX section of the first loudspeaker’s Volume control 6 Reveal 402/502/802 rear panel, using the 3.5 mm mini-jack cable that came with the first speaker.
Connect the “MONITOR LINK” jack of the first loudspeaker to the “MONITOR LINK” jack of the second loudspeaker using the 3.5 mm mini-jack cable that came with the second speaker. Set the “SPEAKER POSITION” switch of each monitor according to its physical position.
Set the position switch of the left loudspeaker (when facing the fronts) to “-►”.
Set the position switch of the right loudspeaker to“◄-”.