Contributor - Level 1

Midas Pro2 with P16

My church in Indonesia, we are using midas pro 2c with DL251, and we need personal mixer for our band, and we want to use p16m without p16i because our aux out is using for some monitor speaker

I still didn't get the answer for the cheapest way to this problem, i has been search any website but still didnt get the answer
I know if using dn9650 with some card but its still expensive

Please help
Sory if my english isnt good
Thanks for the answer

djoeniorjr Contributor - Level 1 2019-09-17

2019-09-17

Midas Pro2 with P16

My church in Indonesia, we are using midas pro 2c with DL251, and we need personal mixer for our band, and we want to use p16m without p16i because our aux out is using for some monitor speaker

I still didn't get the answer for the cheapest way to this problem, i has been search any website but still didnt get the answer
I know if using dn9650 with some card but its still expensive

Please help
Sory if my english isnt good
Thanks for the answer

Highlighted
Triber Contributor

Re: Midas Pro2 with P16

Hi @djoeniorjr ,

There is unfortunatly no way to digitally convert to Ultranet via the Midas pro series despite the P16i having Adat in.  Therefor the DN9650 is not much help here.  You would have to convert from the analogue outputs of another stagebox to the P16i.  I'd suggest a DL154 to handle 16 outputs, plus gives you 8 inputs.  One other option which may work depending how many outputs you are using for PA and Mons: is to use the DL251 for P16i (16channels) and use the 8 outs of the back of the Pro2C to send to foh/mon speakers.  If this has enough outputs, an 8 channel analogue multicore from desk to amps maybe the best option.

Daniel Paine | Solutions Specialist, Music Tribe If you found my post helpful, go ahead and give kudos or mark it as a solution! Community Guidelines | FAQs