Andrew1124 Contributor - Level 2 2019-10-30

2019-10-30

S32 AES50 B not working

My church just purchased an X32 specifically for LiveStreaming and we bought an S32 to be able to have the same inputs with two different boards for customization in the mixes. The AES50 A output works fine, but when trying to communicate with the Livestream using AES50B there is no signal. Attached is pics of our FOH set up, the S32 indicator lights, and the Livestream set up

  • 0 Kudos
  • 13 Replies
  • Reply
Volunteer Moderator

Re: S32 AES50 B not working


@Andrew1124 wrote:

I have tested it in both port A and B on the Livestream console. When I have A port on S32 to A or B port in Livestream it works. It is whatever is linked to S32 B port not syncing.

That doesn't make sense. If you have A port on S32 connected to A or B port of Livestream, with the syn setting to AES50 B port on the Livestream console, it is impossible to get a sync. This is because the master clock has to come from the FOH console to the S32 A port. Then the master clock sync passes through the S32 to its B port to the Livestream console. If the AES50 is connected to the Livestream B port, then setting the sync to AES50 port B should sync. If not, are you getting sync from FOH to the S32 (should be a green light on its A port).

 

Paul Vannatto, Volunteer Forum Administrator and Moderator. Did you find my post helpful? Give kudos or mark it as a solution!
Contributor - Level 2

Re: S32 AES50 B not working


@Paul_Vannatto wrote:

@Andrew1124 wrote:

I have tested it in both port A and B on the Livestream console. When I have A port on S32 to A or B port in Livestream it works. It is whatever is linked to S32 B port not syncing.

That doesn't make sense. If you have A port on S32 connected to A or B port of Livestream, with the syn setting to AES50 B port on the Livestream console, it is impossible to get a sync. This is because the master clock has to come from the FOH console to the S32 A port. Then the master clock sync passes through the S32 to its B port to the Livestream console. If the AES50 is connected to the Livestream B port, then setting the sync to AES50 port B should sync. If not, are you getting sync from FOH to the S32 (should be a green light on its A port).

 


I change the input settings when I change which port it is in. At the time of the picture it was set to the B port

Valued Contributor - Level 2

Re: S32 AES50 B not working

@Andrew1124 This youtube video shows the proper connections for connecting a DL32 inbetween 2 midas M32 boards. The DL32 operates exactly the same way as an S32, as do the mixers to the X32. So the settings and operation are exactly the same. You will see around half way through, the screen of the second mixer and its sync with the DL32. They ran from the DL B port to the second mixer's A port and in the video you can see clearly the A in sync (green) with DL32B. If you used the B port of your second mixer you should see sync B Dl32B (green) If you don't there must be a hardware issue or bad cable. You might just try connecting to the mixer A port side like in the video if only to see if the settings match up the same.

https://www.youtube.com/watch?v=UjJjR2J_aSg

 

Highlighted
Contributor - Level 2

Re: S32 AES50 B not working

Well that looks right, but the other mixer https://audacity.onl/
https://mails.tips/temp-mail/
https://origin.onl/synced to aes50B doesnt get signal? Does it sync up?