Contributor - Level 1

Splitting a mix bus

I have 2 PM1 and I wanted to know it if I can run both off the same mix bus withthis kind of splitter. Please let me know if this will work and not damage the full size Behringer x32. Please feel free to give me a call at 832-896-8488 or you can just email me back

59AE6AA0-C2D1-4EB3-9BEF-DF96F69302A5.jpeg

 

Millerman2372 Contributor - Level 1 2019-11-10

2019-11-10

Splitting a mix bus

I have 2 PM1 and I wanted to know it if I can run both off the same mix bus withthis kind of splitter. Please let me know if this will work and not damage the full size Behringer x32. Please feel free to give me a call at 832-896-8488 or you can just email me back

59AE6AA0-C2D1-4EB3-9BEF-DF96F69302A5.jpeg

 

Highlighted
Super Contributor - Level 2

Re: Splitting a mix bus

@Millerman2372 

Hi Steve, welcome to the forum.

 

I do not recommend connecting two PM1s to a single output. Even one PM1 is a greater load than the line outputs were designed for. Two together could cause distortion on one or more of the X32 line outputs and could possible result in damage.

 

A better solution would be to use Behringer P2 monitor amplfiers. You could connect several of those to the same output. See this thread  for details.